01/11/2026
When I wrote the post about the recent arrival of the Foden twin load, I mentioned that it wasn’t actually the vehicle I had initially been interested in, but that it had appealed to me massively once I actually saw it.
The main reason for travelling to the auction in Cambridge was my wish to hopefully secure the purchase of something that may seem way out of character for myself?!
The images show a model of vehicle that holds a certain fascination and even more importantly, a personal link to my past.
The little blue artic is a Commer Qx, powered by the uniquely designed and distinctive sounding TS3 engine.
It has been restored very well ( like all the Knowles fleet had), and has a claimed birth date of 1955. This age is questionable in my mind as I thought the early models had a divided windscreen?
And so going back to why this particular model…
From a very young age, I had a deep interest in mechanical creations, particularly the heavier ones! Tractors , lorries , earthmoving machines and so forth would mesmerise my young developing mind.
My parents farmed and always had a reasonable amount of heavy equipment around that served to whet my appetite.
Although there were many tracked and wheeled machines around, there were no lorries of our own.
This situation changed on a particularly memorable afternoon as I finished school for the day and began my long walk home.
Parked across the road from the school gates was an ex Double Diamond ( Ind Coope), Commer flat bed. I passed by, taking in the sound of its little two stroke idling away.
The driver tooted the horn and I looked up to see that it was my father. This was clearly a surprise but deserved thorough investigation!
He had actually bought two of them and had just collected the first.
As simplistic as they were, to my young mind, they could have been the Crown Jewels.
I climbed in and we set off, heading back towards the farm.
I clearly recall the screaming supercharger howling away beneath us, the little two stroke creating its distinctive knocking noise.
The two trucks remained on the farm for several years. They were both flatbed rigids and were used mainly in the summer for bringing back hay/ straw from locations that were considered too far for a tractor.
One fateful Saturday evening saw one of the little two stokes decide that it really had had enough, sending a large chunk of its specially designed rocker arm out through the side of the engine. It resulted in catastrophic damage to the cylinder block , bringing a close to this particular vehicle’s life.
The other one soldiered on for a few years, but legislation for goods vehicles was tightening, corrosion was advancing on its little cab etc and eventually the second one also succumbed to its final resting place.
I was always fond of them and would spend many hours just sitting in them, pretending that I was off on some distant journey!
The final piece of their jigsaw was the sad journey into the workshop where the cutting torch was used to remove the cabs / engines etc before the chassis were re shaped, creating a drawbar.
The were now only trailers that could be towed by a tractor 🥲😔.
The engines were redundant and I was given them. I dissected the “dead one “ carefully examining all the components. It was a massive learning curve to a teenage mind , each component forming pages of a book that I can still see clearly if I think about it.
Like many vehicles, they have several stages in their lives… new, working, lower value used, totally undesirable and worth no more than scrap price…. Then after many years, should they survive, they begin to climb again.
I witnessed the latter stages of my father’s vehicles but sadly they didn’t make the final transition.
Move on 50 years and my life is still fuelled by the same passions, but channeled between the lines of business where necessity and reality rule the day. It has been this way for many years now and I guess it will remain much the same, apart from my own personal “stolen “ moments.
As I have got further on in years, I have started to allow myself small distractions from the hustle and bustle of the daily grind. A number of strange and unusual machines have appeared. Some have special links, some are just appealing.
I adore them all in varying degrees and the Commer is just another.
To those that are unaware, the vehicle in the images has a fascinating design that bucked the trend back in the day.
It was centred around the engine. A small displacement ( 3.5l), two stroke diesel that had three cylinders with six opposed pistons. The crankshaft was situated beneath the horizontal cylinders and a large rocker arm connected each piston/ conrod to a further link rod, eventually rotating the crankshaft.
The pistons would travel as far apart as possible, exposing ports in the cylinder walls . Charged air from the shaft driven supercharger would rush in through the inlet port and out into the exhaust, effectively clearing the cylinder of spent gas and charging it in readiness for the next firing stroke. As the pistons headed towards one another, the ports were closed and compression would now increase between them.
A centrally situated injector would deliver atomised fuel when the pistons were at their closest, creating an explosion and driving them apart once more. Of course this action resulted in effects on the rocker arms , eventually terminating at the point where the second connecting rod joined the crankshaft…
A marvellous and simple arrangement, firing on every stroke and revving freely.
They were quite fast in their day and many people were fond of them.
The “TS3” description relates to the origin of the engine… Tilling Stevens 3 cylinder, being built at Maidstone in Kent.
The trailer attached to this unit is also unusual… a “ four in line “ arrangement, whereby the wheels are secured independently, allowing an extra brake drum for each “group “ .
Its support legs are deployed radially as opposed to going up and down and it is constructed using a ladder style chassis… it is of special interest within itself.
On the day of the sale It was loaded with a number of smaller items myself and others purchased at the auctions.
It was then parked , ready to begin the 100 or so mile journey home.
Sadly, an alternator bearing failed, causing me to put it back in the shed until I’d dealt with the problem.
A week later , I took the parts back and after an hour or two it was fixed .
It performed well on its homeward journey, whizzing down the M11 and doing its best to keep abreast with the traffic. One of those special and memorable moments in my life.
😊🥰