What are the opening hours?

Monday 8:30am - 5pm Tuesday 8:30am - 5pm Wednesday 8:30am - 5pm Thursday 8:30am - 5pm Friday 8:30am - 5pm

Wilbo Worx

Powder coating & wheel refurbishment.

19/06/2026

Having a smashing Friday 🫠🤣

Does anyone know where I can get a sheet of glass for this today? 4mm 358mm x 728mm

Please 🙏

14/06/2026

Porsche Macan in with us for a full alloy wheel refurbishment 🔥

These wheels had suffered from heavy kerb damage, with some areas requiring aluminium TIG welding to rebuild the damaged sections before being carefully reshaped back to their original profile.

✅Fully chemically stripped
✅Shot blasted back to bare alloy
✅Aluminium TIG weld repairs carried out
✅Wheels reshaped and prepared
✅Powder coated in black primer
✅Porsche Neodymium water-based colour applied
✅Finished in Freilacke satin powder lacquer for a durable OEM-style finish
✅Tyres refitted and balanced using black stealth weights
✅Wheels refitted to the vehicle and torqued to Porsche specifications

The finished result gives these wheels a factory-fresh appearance while providing a durable finish designed to withstand years of use.

Customer has since purchased his own black Porsche centre caps to finish them off nicely 🤩

📍 WILBOWORX LTD
Unit 11, Montrose Road Industrial Estate
Brechin, DD9 7RU

📞 01356 230302
📧 [email protected]

Powder Coating & Alloy Wheel Refurbishment

13/06/2026

✨ Audi S4 Diamond Cut Alloy Wheel Refurbishment ✨

As with many diamond cut wheels, these Audi S4 alloys had begun to suffer from corrosion creeping beneath the original lacquer, causing the finish to deteriorate.

The wheels were fully stripped in our acid tanks before being shot blasted through our new automatic blasting system, providing a clean and uniform surface ready for coating.

Each wheel was then powder coated in Dark Anthracite before being transported to our friends at Peak Alloy Refurbishment, Dundee, where the faces were precision machined on their diamond cutting lathe.

Once back with us, the wheels received our gloss clear acrylic powder lacquer, providing exceptional clarity, durability and long-term protection against the elements.

✅ Acid stripped
✅ Shot blasted
✅ Powder coated in Dark Anthracite
✅ Precision diamond cut finish
✅ Acrylic powder lacquer for maximum durability

A fresh factory finish, ready for many more years on the road. 😍

Featuring Scar, Head of Quality Control, ensuring standards remain suitably high. 🐶 can you tell he’s getting fed up of the photos yet?…🙈

📍 WILBOWORX LTD
Unit 11, Montrose Road Industrial Estate
Brechin, DD9 7RU

☎️ 01356 230302
📧 [email protected]
Message the page for bookings…

07/06/2026

Sometimes less is more. 🛞✨

This classic set of ATS alloys came to us looking tired and in need of some attention. Unfortunately forgot to take some before photos, but they were the usual black with corroded diamond cut faces…

The wheels were chemically stripped, shot blasted, carefully prepared and refinished in our German fine silver before being protected with our durable acrylic powder lacquer.

No wild colours.
No gimmicks.
Just a clean, period-correct finish that suits these wheels perfectly. 👌

As always, every wheel is thoroughly prepared before coating to ensure a finish that not only looks fantastic but is built to last.

And of course, quality control was overseen by Scar. 🐶🤣

📍 WILBOWORX LTD
Unit 11, Montrose Road Industrial Estate
Brechin, DD9 7RU

📞 01356 230302
📧 [email protected]

💬 Message our page for quotations and bookings.

05/06/2026

Hoping someone can help us out… oven wouldn’t fire today. Chased it to a broken ignition probe… sort of like a big spark plug…

Trying to source one is a bit of a nightmare. Been in a few of gas and plumbing stores but it’s not something they have unfortunately…

31/05/2026

🐾 Quality control manager Scar has signed these ones off! 🐾

These Ford Puma ST alloys came in suffering from the usual diamond cut corrosion and lacquer failure around the outer edges.

✅ Chemically stripped
✅ Shot blasted
✅ Coated in Ford Magnetite
✅ Diamond cut machined face
✅ Finished in our satin lacquer for a factory-style finish with added durability

The satin lacquer really complements the Ford Magnetite, giving these wheels a clean OEM+ appearance while bringing them back to showroom condition.

And most importantly… Scar carried out the final quality control inspection and confirmed there were no dust particles, no dog hairs, and no treats hidden inside the barrels. His smile says it all. 🐶

📍 WILBOWORX
Unit 11, Montrose Road Industrial Estate
Brechin, DD9 7RU

📞 01356 230302
📧 [email protected]

24/05/2026

Get your wheels into us before they end up this bad and costing you more to repair 🥲

Nissan Juke in for alloy wheel refurbishment after suffering from severe corrosion causing constant air loss around the tyre bead… 🛞

These wheels had been left for so long that the corrosion had heavily eaten into the alloy, leaving deep pitting throughout the faces and bead seats. After acid stripping and shot blasting to remove all the rot and oxidation, we had to apply a high build primer to smooth out the damaged areas before refinishing.

Finished in a fresh dark anthracite with our durable acrylic lacquer for maximum protection and clarity ✨

Tyres refitted and balanced, with black stealth weights👌🏼

Swipe through to see the condition before refurbishment 👀

📍 Unit 11, Montrose Road Industrial Estate, Brechin, DD9 7RU
📞 01356 230302
📧 [email protected]

17/05/2026

⚡️ BREMBO CALIPER REFURBISHMENT ⚡️

Had these Brembo brake calipers in for a full refurbishment finished in Porsche Neodymium with Brembo decals lacquered over to permanently seal them in 👌🏼

A lot of people don’t realise the amount of preparation and attention to detail that goes into powder coating properly… until they’ve had work done elsewhere and run into problems afterwards.

We regularly see parts returned covered in powder where it shouldn’t be — threads filled needing tapped back out, mating faces coated over, edges with excessive build up needing sanded back, and critical areas masked poorly or not at all.

The time spent on preparation and masking is just as important as the finish itself, and it’s something we never cut corners on.

These calipers were fully stripped and carefully prepared before coating:

✔️ Black powder coat primer
✔️ Porsche Neodymium water base colour
✔️ Super durable acrylic powder lacquer

As always, attention to detail is everything:

✅ All threads kept completely free from powder/paint
✅ Piston bores masked and kept perfectly clean
✅ Mating faces masked correctly
✅ Decals sealed beneath lacquer for durability and longevity

A proper OEM+ finish built to last 🔥

Swipe through to see the process from bare blasted castings to the finished result 👀

📍 WILBOWORX
Unit 11, Montrose Road Industrial Estate
Brechin, DD9 7RU

📞 01356 230302
📧 [email protected]

13/05/2026

🔥 MINI JCW wheels brought back to life… and these came out unreal. 🔥

These John Cooper Works alloys came in tired,dull and just started corroding… , this customer contacted us and booked in before they got any worse, this kept costs to a minimum as there was no extra blasting charges/high build primer etc etc👌🏼

✔️ Acid stripped
✔️ Shot blasted to remove corrosion
✔️ Coated in our jet black powder primer
✔️ Diamond cut machined face
✔️ Finished in our super durable gloss acrylic lacquer for extra clarity and protection

The gloss, depth and contrast on these are next level in the sunlight 😮‍💨

Tyres refitted and balanced with black stealth weights before being fitted back to the car. Ready to go 👊🏼

📍 Unit 11, Montrose Road Industrial Estate, Brechin, DD9 7RU
📞 01356 230302
📧 [email protected]

03/05/2026

I absolutely hate, hate! Doing steel wheels 🫠 but these came out absolutely perfect 👌🏼

These steel wheels came in tired, rusty and well past their best…Now finished in our deep gloss acrylic black — looking better than new.

Full process carried out:• Acid stripped• Shot blasted to remove all rust & contamination• Zinc anti-rust primer applied• Black primer• Finished in our high gloss acrylic lacquer

No shortcuts. Just proper prep and a finish built to last.

If your wheels are letting your vehicle down… you know where we are 👀

📍 Unit 11, Montrose Road Industrial Estate, Brechin, DD9 7RU📞 01356 230302📧 [email protected]

Address

Brechin
DD97RU

Opening Hours

Monday	8:30am - 5pm
Tuesday	8:30am - 5pm
Wednesday	8:30am - 5pm
Thursday	8:30am - 5pm
Friday	8:30am - 5pm

Telephone

+447731641920

Website

https://wilboworx.com/

Alerts

Be the first to know and let us send you an email when Wilbo Worx posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Wilbo Worx:

Shortcuts

Address
Telephone
Opening Hours
Alerts
Contact The Business
Claim ownership or report listing

Want your business to be the top-listed Cars & Car Service in Brechin?