Motorcorp Solutions

16/07/2026

When the big daddy of dashes arrives in the shop, we know things are definately heating up with a current job we have on the go!

EMtron ED10M dash paired with a 8 button keypad. This is going to be working with the KV8 ECU already fitted in the vehicle, leveling up the cars capabilities.

Watch this space!

For all inquires, shoot us a DM, visit our website or email [email protected]

14/05/2026

Phone is currently down

Please DM us if you need to get in contact

16/02/2026

Who needs some 8HP, DCT or DSG control?

30/01/2026

We are closed next week to take a much needed holiday.

Please be patient on responses while we are away, as recepetion is not 100% where we are going.

Will be back from Monday 9th Feb!

19/11/2025

Following up after Monday's power gains, here is the custom 3in exhaust by PJZ Customs in all of it's glory!

The RD7 shares alot of it's underbody design with DC5 Intergra's + EP3 Civic's and alot of the 'off the shelf' 3in systems inherently hit on the body under the driver's seat and around the rear subframe where it goes up and over the rear LCA's. PJ has got the fitment perfect and we have not experienced any unwanted noises from the new system.

Wanting to modify your car but unsure where to start? Reach out to us via DM, email [email protected] or reach out to us via our website www.motorcorpsolutions.com.au

17/11/2025

The proof is in the pudding!! (or this case the 3in exhaust)

Our long time customer brought his RD7 CRV in needing some work carried out in preperation for some big breathing mods early next year and one of the area's that needed attending to was the broken flex joint in the current 2.5in exhaust, and after a quick chat with the client, we got PJZ Customs to fab up a new header back system for us (pictures will be in a seperate post).

Upon receiving the CRV back, we bolted the old girl onto the hub dyno and went through the tune to suit the new exhaust. Final peak numbers of 152kw / 224.1nm (6.1kw / 7.2nm peak gains) on 98RON prove once again that the good old peoples engine love a 3in exhaust. We were also able to increase the limiter to 8500rpm (as on the previous 2.5in we had power fall over quite hard after 7600rpm) which gave us a 2500rpm window from 6000rpm to redline where power was 138kw and over!

We have also picked 3 different points over the rpm range in the 2nd, 3rd & 4th pictures to show the biggest gains, as peak numbers don't show everything.

Picture 2 - 4.7kw / 12.8nm gain @ 3410rpm
Picture 3 - 5.7km / 12.4nm gain @ 5500rpm
Picture 4 - 11kw / 12nm gain @ 7480rpm

Smoother power & torque delivery makes the car easier to drive, while still being an absolute sleeper!

Does your car need tuning? Shoot us a DM, email [email protected] or reach out to us via our website https://motorcorpsolutions.com.au/dyno-tuning/

05/11/2025

Have an automatic transmisison or DSG/DCT that needs to be controlled? Emtron World have entered the game with a very serious bit of hardware that will allow you to do just about anything you can think of.

Shoot us a DM, email, or reach out through the website for more information

www.motorcorpsolutions.com.au

🚨 New Product Alert! The TM16 Transmission Control is here, precision engineered for ultimate performance! 🚨

Applications include Dual Clutch Transmission Control, Multi-Clutch Automatic Transmission Control, and Traditional Automatic Transmission Control.

✅ Dual 650MHz Processor
✅ Compatible with 12 and 24 Volt systems
✅ 16 x Low Side Proportional Current Solenoid Outputs
✅ 8 x Half-Bridge Auxiliary Outputs
✅ 4 x Protected Solenoid Power Supply Outputs
✅ 4 x Analogue Outputs
✅ 16 x Analogue Inputs
✅ 16 x Digital Inputs
✅ 4 x 2 Wire Hall Effect Wheel Speed Inputs
✅ IMU 3 Axis Accelerometer & Gyroscope
✅ 8 GB Data Logging Memory
✅ 2 x CAN 2.0A/B Busses
✅ 1 x RS232 Interface
✅ Ethernet Communications

02/10/2025

Fuel system upgrade for a Honda S2000, as we were having some less than ideal fuel supply problems on the dyno.

- 255lp/h fuel pump
- Bosch Motorsport Australia long nozzle injectors + fuel pressure/temp combination sensor
- Radium Engineering S2000 fuel rail with fuel feed kit + direct mount fuel pressure regulator

Results coming soon!

For all enquiries relating to you build, shoot us a DM or reach out via www.motorcorpsolutions.com.au

25/09/2025

OUR WEBSITE IS OFFICIALLY LIVE!!

After what feels like an eternity of constant changes to make this as user friendly and easy to navigate as possible, we are up and live.

We will be updating the dyno gallery after each tune and in the new year we will be building on a few sections of the site to bring more indepth content to showcase our client builds.

www.motorcorpsolutions.com.au

A massive thanks to the crew at Tactik for all the work you guys have done to get us here

**Music in video is for promotional use only
Orkidea - Unity (Mindwave Remix)