GRW South Africa, 20 Abattoir Road, Worcester (2026)

10/09/2026

𝗠𝗲𝗰𝗵𝗮𝗻𝗶𝗰𝗮𝗹 𝗗𝗲𝘀𝗶𝗴𝗻 𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿 / 𝗦𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗮𝗹 𝗔𝗻𝗮𝗹𝘆𝘀𝘁

We are a leading global manufacturer of premium road tanker trailers and heavy goods trailers. Our products serve high-compliance markets across South Africa, East Africa, Europe, the UK, and Australia. We drive industry innovation through cutting-edge engineering, manufacturing, and robust structural design. We are seeking a capable and detail-driven Mechanical Design Engineer / Structural Analyst to join a specialist engineering team involved in product design and development from initial concept design through to global compliance certification.

𝙏𝙝𝙚 𝙍𝙤𝙡𝙚
The successful candidate will be responsible for mechanical design, structural analysis and engineering support across a range of tanker and heavy trailer products. This role requires strong technical ability, practical engineering judgement and the ability to work within international market requirements and manufacturing constraints. This is an opportunity to contribute to technically demanding trailer and tanker products used in highly regulated transport sectors across multiple international markets. The role offers variety, practical engineering challenges and the opportunity to be involved from concept through to manufacturing support.

𝙆𝙚𝙮 𝙍𝙚𝙨𝙥𝙤𝙣𝙨𝙞𝙗𝙞𝙡𝙞𝙩𝙞𝙚𝙨:
• Develop mechanical designs for road tanker trailers, pressure-containing equipment and heavy goods trailer structures.
• Perform load calculations, structural calculations and finite element analysis to support product integrity, safety and compliance.
• Optimize designs for weight reduction, payload maximization, and manufacturing efficiency.
• Perform pressure vessel design calculations, design reports and supporting documentation for pressure vessel approval.
• Compile comprehensive technical documentation, finite element analysis reports, and certification dossiers
• Support design verification, product improvements, failure investigations and manufacturing problem-solving.
• Work closely with production, quality, sales and management teams to deliver robust, manufacturable and cost-effective designs.
• Ensure designs meet applicable customer requirements, regulatory expectations and market-specific standards.
• Participate in component verification activities.
• Identifies continuous improvement/automation activities.
• Coaches, reviews and delegates work for lower-level professionals.
• Creates and manages institutional knowledge.
• Other duties as assigned.

𝙎𝙠𝙞𝙡𝙡𝙨 𝙖𝙣𝙙 𝙀𝙭𝙥𝙚𝙧𝙞𝙚𝙣𝙘𝙚:
• B.Eng./B.Sc. Eng or M.Sc. Eng in Mechanical Engineering
• 5+ years related experience.
• Experience in pressure vessel design.
• Competence in 3D CAD modelling and engineering drawing preparation (experience of Creo or SolidWorks will be beneficial).
• Proven expertise using finite element analysis software for linear and non-linear structural analysis (experience of Abaqus will be beneficial).
• Experience with ERP and PDM tools
• Experience writing and reviewing analysis/test reports
• Good understanding of steels, aluminum, materials selection, fabrication methods, welding, machining, bolted connections, mechanical components, and practical workshop constraints.
• Ability to read and produce general arrangement drawings, fabrication drawings, assemblies, weld details, bills of materials, and technical specifications.

𝙋𝙚𝙧𝙨𝙤𝙣𝙖𝙡 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙚𝙨:
• Analytical, methodical, and quality focused.
• Practical engineering mindset with strong design judgement.
• Able to manage multiple tasks and meet project deadlines.
• Willing to take ownership of designs from concept to completion.
• Self-starter, able to start and complete projects quickly and independently.
• Experience building strong partnerships with other employees.
• Experience working with cross-functional teams.

Candidate must be willing to relocate or travel to Worcester daily. Shift is 06:00 – 14:30. Please send your application and proof of academic records to [email protected]. Closing date: 30 September 2026

𝘐𝘧 𝘺𝘰𝘶 𝘩𝘢𝘷𝘦 𝘯𝘰𝘵 𝘩𝘦𝘢𝘳𝘥 𝘧𝘳𝘰𝘮 𝘶𝘴 𝘸𝘪𝘵𝘩𝘪𝘯 𝘵𝘸𝘰 𝘸𝘦𝘦𝘬𝘴 𝘰𝘧 𝘵𝘩𝘦 𝘤𝘭𝘰𝘴𝘪𝘯𝘨 𝘥𝘢𝘵𝘦, 𝘱𝘭𝘦𝘢𝘴𝘦 𝘤𝘰𝘯𝘴𝘪𝘥𝘦𝘳 𝘺𝘰𝘶𝘳 𝘢𝘱𝘱𝘭𝘪𝘤𝘢𝘵𝘪𝘰𝘯 𝘢𝘴 𝘶𝘯𝘴𝘶𝘤𝘤𝘦𝘴𝘴𝘧𝘶𝘭. 𝘎𝘙𝘞 (𝘗𝘛𝘠) 𝘓𝘵𝘥 𝘳𝘦𝘴𝘦𝘳𝘷𝘦𝘴 𝘵𝘩𝘦 𝘳𝘪𝘨𝘩𝘵 𝘵𝘰 𝘸𝘪𝘵𝘩𝘥𝘳𝘢𝘸 𝘵𝘩𝘪𝘴 𝘱𝘰𝘴𝘪𝘵𝘪𝘰𝘯 𝘢𝘵 𝘢𝘯𝘺 𝘴𝘵𝘢𝘨𝘦 𝘰𝘧 𝘵𝘩𝘦 𝘳𝘦𝘤𝘳𝘶𝘪𝘵𝘮𝘦𝘯𝘵 𝘱𝘳𝘰𝘤𝘦𝘴𝘴, 𝘪𝘧 𝘥𝘦𝘦𝘮𝘦𝘥 𝘯𝘦𝘤𝘦𝘴𝘴𝘢𝘳𝘺.

02/09/2026

𝗖𝗼𝘀𝘁 𝗔𝗰𝗰𝗼𝘂𝗻𝘁𝗮𝗻𝘁

We are looking for a detail-oriented Cost Accountant to join our financial team in Worcester.

Start Date: As soon as possible

Salary: Market-related, based on experience

Closing date: 20 September 2026

𝗞𝗲𝘆 𝗥𝗲𝘀𝗽𝗼𝗻𝘀𝗶𝗯𝗶𝗹𝗶𝘁𝗶𝗲𝘀

𝘾𝙤𝙨𝙩𝙞𝙣𝙜 𝙖𝙣𝙙 𝙈𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝘼𝙣𝙖𝙡𝙮𝙨𝙞𝙨
• Develop, maintain, and review standard costing models across products and manufacturing processes.
• Analyse material, labour, and overhead costs to identify variances and opportunities for cost savings.
• Perform detailed cost analyses for all projects.
• Support pricing decisions through accurate product costing and margin analysis.
• Monitor work-in-progress (WIP), raw material, and finished goods balances.

𝙁𝙞𝙣𝙖𝙣𝙘𝙞𝙖𝙡 𝙍𝙚𝙥𝙤𝙧𝙩𝙞𝙣𝙜 𝙖𝙣𝙙 𝘼𝙣𝙖𝙡𝙮𝙨𝙞𝙨
• Prepare monthly costing reports and management information.
• Analyse manufacturing and operational variances and provide recommendations for corrective action.
• Support month-end and year-end financial closing processes.
• Assist with budgeting, forecasting, and financial planning activities.
• Prepare profitability and margin analyses by product class.

𝙀𝙍𝙋 𝙖𝙣𝙙 𝙎𝙮𝙨𝙩𝙚𝙢𝙨 𝙈𝙖𝙣𝙖𝙜𝙚𝙢𝙚𝙣𝙩
• Maintain costing-related master data within the ERP system.
• Assist with ERP process improvements and system enhancements.
• Partner with production, engineering, procurement, and supply chain teams to improve costing accuracy and operational efficiency.

𝘾𝙤𝙢𝙥𝙡𝙞𝙖𝙣𝙘𝙚 𝙖𝙣𝙙 𝘾𝙤𝙣𝙩𝙞𝙣𝙪𝙤𝙪𝙨 𝙄𝙢𝙥𝙧𝙤𝙫𝙚𝙢𝙚𝙣𝙩
• Ensure adherence to internal controls, accounting standards, and company policies.
• Identify process improvement opportunities to enhance operational efficiency and financial performance.
• Support Lean Manufacturing, Continuous Improvement, and Cost Reduction initiatives.

𝗠𝗶𝗻𝗶𝗺𝘂𝗺 𝗥𝗲𝗾𝘂𝗶𝗿𝗲𝗺𝗲𝗻𝘁𝘀

𝙌𝙪𝙖𝙡𝙞𝙛𝙞𝙘𝙖𝙩𝙞𝙤𝙣𝙨
• BCom Cost & Management Accounting or CIMA
• 5–8 years in a heavy manufacturing or engineering environment
• Proven standard costing and variance analysis experience
• Strong WIP and project costing expertise
• Syspro experience (or another major manufacturing ERP)
• Demonstrated ability to work closely with engineering, production, procurement, and supply chain teams
• Advanced Excel and financial modelling skills
• Exposure to lean manufacturing and continuous improvement initiatives
• Strong understanding of standard costing and variance analysis.

𝙏𝙚𝙘𝙝𝙣𝙞𝙘𝙖𝙡 𝙎𝙠𝙞𝙡𝙡𝙨
• Advanced Microsoft Excel skills.
• Strong analytical and problem-solving abilities.
• Knowledge of IFRS
• Experience with financial reporting and management accounting.
• Ability to analyse large data sets and present meaningful recommendations.

𝗖𝗼𝗺𝗽𝗲𝘁𝗲𝗻𝗰𝗶𝗲𝘀
The ideal candidate will demonstrate:
• Strong attention to detail and accuracy.
• Excellent analytical and financial modelling capabilities.
• Ability to work independently and meet deadlines.
• Strong business acumen and commercial awareness.
• Effective communication and stakeholder management skills.
• Ability to influence operational teams through data-driven insights.
• High levels of integrity and professionalism.
• Continuous improvement mindset.

𝗞𝗲𝘆 𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 𝗔𝗿𝗲𝗮𝘀 (𝗞𝗣𝗔𝘀)
• Accuracy of standard costs and product costing models.
• Timely completion of monthly reporting and analysis.
• Reduction in manufacturing cost variances.
• Improvement in gross margin visibility and reporting.
• System and ERP master data integrity.
• Compliance with audit and financial reporting requirements.

Must be willing to work the shifts: 06:00 – 14:30 / 07:30 – 16:00 / 07:30 – 16:30. Please note this is an office-based position.

Send your application to [email protected].
Please indicate for which vacancy you are applying for. Your application must include your qualifications and salary expectations.

𝘐𝘧 𝘺𝘰𝘶 𝘩𝘢𝘷𝘦 𝘯𝘰𝘵 𝘩𝘦𝘢𝘳𝘥 𝘧𝘳𝘰𝘮 𝘶𝘴 𝘸𝘪𝘵𝘩𝘪𝘯 𝘵𝘸𝘰 𝘸𝘦𝘦𝘬𝘴 𝘰𝘧 𝘵𝘩𝘦 𝘤𝘭𝘰𝘴𝘪𝘯𝘨 𝘥𝘢𝘵𝘦, 𝘱𝘭𝘦𝘢𝘴𝘦 𝘤𝘰𝘯𝘴𝘪𝘥𝘦𝘳 𝘺𝘰𝘶𝘳 𝘢𝘱𝘱𝘭𝘪𝘤𝘢𝘵𝘪𝘰𝘯 𝘢𝘴 𝘶𝘯𝘴𝘶𝘤𝘤𝘦𝘴𝘴𝘧𝘶𝘭. 𝘎𝘙𝘞 (𝘗𝘛𝘠) 𝘓𝘵𝘥 𝘳𝘦𝘴𝘦𝘳𝘷𝘦𝘴 𝘵𝘩𝘦 𝘳𝘪𝘨𝘩𝘵 𝘵𝘰 𝘸𝘪𝘵𝘩𝘥𝘳𝘢𝘸 𝘵𝘩𝘪𝘴 𝘱𝘰𝘴𝘪𝘵𝘪𝘰𝘯 𝘢𝘵 𝘢𝘯𝘺 𝘴𝘵𝘢𝘨𝘦 𝘰𝘧 𝘵𝘩𝘦 𝘳𝘦𝘤𝘳𝘶𝘪𝘵𝘮𝘦𝘯𝘵 𝘱𝘳𝘰𝘤𝘦𝘴𝘴, 𝘪𝘧 𝘥𝘦𝘦𝘮𝘦𝘥 𝘯𝘦𝘤𝘦𝘴𝘴𝘢𝘳𝘺.

01/09/2026

𝗔𝗖𝗖𝗢𝗨𝗡𝗧𝗔𝗡𝗧

We are looking for a detail-oriented Accounant to join our financial team in Worcester.

Start Date: As soon as possible

Salary: Market-related, based on experience

Closing date: 15 September 2026

𝙆𝙚𝙮 𝙍𝙚𝙨𝙥𝙤𝙣𝙨𝙞𝙗𝙞𝙡𝙞𝙩𝙞𝙚𝙨:
• Manage general ledger transactions
• Assisting in the preparation of the monthly management accounts
• Maintain and update the fixed asset register and depreciation calculations
• Assist with budgeting and forecasting
• Reconcile and analyse accounts and expenditure
• Assist in handling audit preparations
• Support financial reporting and compliance requirements
• Collect and maintain import documentation for Belgium VAT filings

𝙍𝙚𝙦𝙪𝙞𝙧𝙚𝙢𝙚𝙣𝙩𝙨:
• Relevant accounting qualification (Diploma, Degree or equivalent)
• Minimum 1–2 years accounting experience
• Knowledge of Syspro, will be beneficial
• Excellent attention to detail and accuracy
• Ability to work independently and meet deadlines
• Strong excel skills

Must be willing to work the shifts: 06:00 – 14:30 / 07:30 – 16:00 / 07:30 – 16:30

Send your application to 𝗰𝗮𝗿𝗲𝗲𝗿𝘀@𝗴𝗿𝘄.𝗰𝗼.𝘇𝗮. Please indicate for which vacancy you are applying for. Your application must include your qualifications and salary expectations.

𝘐𝘧 𝘺𝘰𝘶 𝘩𝘢𝘷𝘦 𝘯𝘰𝘵 𝘩𝘦𝘢𝘳𝘥 𝘧𝘳𝘰𝘮 𝘶𝘴 𝘸𝘪𝘵𝘩𝘪𝘯 𝘵𝘸𝘰 𝘸𝘦𝘦𝘬𝘴 𝘰𝘧 𝘵𝘩𝘦 𝘤𝘭𝘰𝘴𝘪𝘯𝘨 𝘥𝘢𝘵𝘦, 𝘱𝘭𝘦𝘢𝘴𝘦 𝘤𝘰𝘯𝘴𝘪𝘥𝘦𝘳 𝘺𝘰𝘶𝘳 𝘢𝘱𝘱𝘭𝘪𝘤𝘢𝘵𝘪𝘰𝘯 𝘢𝘴 𝘶𝘯𝘴𝘶𝘤𝘤𝘦𝘴𝘴𝘧𝘶𝘭. 𝘎𝘙𝘞 (𝘗𝘛𝘠) 𝘓𝘵𝘥 𝘳𝘦𝘴𝘦𝘳𝘷𝘦𝘴 𝘵𝘩𝘦 𝘳𝘪𝘨𝘩𝘵 𝘵𝘰 𝘸𝘪𝘵𝘩𝘥𝘳𝘢𝘸 𝘵𝘩𝘪𝘴 𝘱𝘰𝘴𝘪𝘵𝘪𝘰𝘯 𝘢𝘵 𝘢𝘯𝘺 𝘴𝘵𝘢𝘨𝘦 𝘰𝘧 𝘵𝘩𝘦 𝘳𝘦𝘤𝘳𝘶𝘪𝘵𝘮𝘦𝘯𝘵 𝘱𝘳𝘰𝘤𝘦𝘴𝘴, 𝘪𝘧 𝘥𝘦𝘦𝘮𝘦𝘥 𝘯𝘦𝘤𝘦𝘴𝘴𝘢𝘳𝘺.

28/08/2026

KEEPING FRIDAY FRESH!

Food Lover’s Market has taken delivery of its first two GRW refrigerated trailers, fitted with Schmitz cooling units.

A fresh new addition to the fleet—built to keep the cool things cool and the good things moving.

May there be many cool kilometers ahead!

27/08/2026

𝙒𝙀𝙄𝙂𝙃𝙄𝙉𝙂 𝙄𝙉 𝘽𝙀𝙁𝙊𝙍𝙀 𝙍𝙊𝙇𝙇𝙄𝙉𝙂 𝙊𝙐𝙏.

This brand-new milk tanker for Woodlands Dairy is making one final stop on the weighbridge before hitting the road and getting to work.

Freshly built.
Beautifully finished.
Ready to moo-ve.

24/08/2026

𝗛𝗜𝗚𝗛 𝗙𝗜𝗩𝗘, 𝗜𝗭𝗜𝗞𝗪𝗘 𝗘𝗡𝗘𝗥𝗚𝗬!

Five new GRW fuel trailers. One powerful fleet upgrade.
Thank you for your continued support and trust in GRW!

18/08/2026

𝗝𝗨𝗡𝗜𝗢𝗥 𝗗𝗥𝗔𝗨𝗚𝗛𝗧𝗦𝗠𝗔𝗡

GRW Holdings is a highly regarded manufacturer of trailers and tankers for Local and international markets. The company is based in the picturesque town of Worcester, Western Cape.

We are looking for dynamic mechanical Junior Draughtsman to join the Engineering Department.

The successful candidate will report directly to the Product Manager.

Shortlisted candidates will be required to do a Drawing assessment. Applications must be submitted before or on 27 August 2026.

𝙍𝙚𝙦𝙪𝙞𝙧𝙚𝙢𝙚𝙣𝙩𝙨:
- 2-3 years’ relevant experience (Mechanical Engineering environment)
- Experience in Automotive Industry or production setup would be advantageous.
- B tech or Technical Diploma is required
- Understanding technical designs, drawings, and materials.
- Computer literate
- Solid works experience is essential.
- Creo experience advantageous.

𝙏𝙮𝙥𝙞𝙘𝙖𝙡 𝙙𝙪𝙩𝙞𝙚𝙨 𝙬𝙤𝙪𝙡𝙙 𝙗𝙚:
- Conduct research when required.
- Interactions and negotiations with various departments and suppliers required in order to provide engineering deliverables.
- Be able to work individually as well as in a team setup.
- Responsible for providing relevant engineering deliverables including 3D CAD model, 2D Manufacturing & Assembly drawings, legislative documentation, and bills of material.
- Contribute towards process improvements.
- Compliance with safety requirements
- Conformance to GRW quality system requirements

𝘾𝙤𝙢𝙥𝙚𝙩𝙚𝙣𝙘𝙞𝙚𝙨:
- Accuracy and detail orientation
- Planning and organising
- Collaborative problem solving & decision making.
- Pro-activity & initiative
- Punctuality
- Teamwork
- Self-management and meeting deadlines

Candidate must be willing to relocate or travel to Worcester daily. Shift is 06:00 – 14:30 from Monday – Friday. Flexi hours or remote working hours might be considered.

Please send a detailed CV with certificates and salary expectations to 𝗰𝗮𝗿𝗲𝗲𝗿𝘀@𝗴𝗿𝘄.𝗰𝗼.𝘇𝗮.

𝘐𝘧 𝘺𝘰𝘶 𝘩𝘢𝘷𝘦 𝘯𝘰𝘵 𝘩𝘦𝘢𝘳𝘥 𝘧𝘳𝘰𝘮 𝘶𝘴 𝘸𝘪𝘵𝘩𝘪𝘯 𝘵𝘸𝘰 𝘸𝘦𝘦𝘬𝘴 𝘰𝘧 𝘵𝘩𝘦 𝘤𝘭𝘰𝘴𝘪𝘯𝘨 𝘥𝘢𝘵𝘦, 𝘱𝘭𝘦𝘢𝘴𝘦 𝘤𝘰𝘯𝘴𝘪𝘥𝘦𝘳 𝘺𝘰𝘶𝘳 𝘢𝘱𝘱𝘭𝘪𝘤𝘢𝘵𝘪𝘰𝘯 𝘢𝘴 𝘶𝘯𝘴𝘶𝘤𝘤𝘦𝘴𝘴𝘧𝘶𝘭. 𝘎𝘙𝘞 𝘏𝘰𝘭𝘥𝘪𝘯𝘨𝘴 (𝘗𝘛𝘠) 𝘓𝘵𝘥 𝘳𝘦𝘴𝘦𝘳𝘷𝘦𝘴 𝘵𝘩𝘦 𝘳𝘪𝘨𝘩𝘵 𝘵𝘰 𝘸𝘪𝘵𝘩𝘥𝘳𝘢𝘸 𝘧𝘳𝘰𝘮 𝘵𝘩𝘪𝘴 𝘱𝘰𝘴𝘪𝘵𝘪𝘰𝘯 𝘢𝘵 𝘢𝘯𝘺 𝘴𝘵𝘢𝘨𝘦 𝘰𝘧 𝘵𝘩𝘦 𝘳𝘦𝘤𝘳𝘶𝘪𝘵𝘮𝘦𝘯𝘵 𝘱𝘳𝘰𝘤𝘦𝘴𝘴, 𝘪𝘧 𝘥𝘦𝘦𝘮𝘦𝘥 𝘯𝘦𝘤𝘦𝘴𝘴𝘢𝘳𝘺.

18/08/2026

𝗖𝗢𝗡𝗧𝗜𝗡𝗨𝗢𝗨𝗦 𝗜𝗠𝗣𝗥𝗢𝗩𝗘𝗠𝗘𝗡𝗧 𝗘𝗡𝗚𝗜𝗡𝗘𝗘𝗥

An exciting opportunity has arisen for an enthusiastic and driven Continuous Improvement Engineer at our Worcester branch.

The responsibilities of this job include, but are not limited to the following:

The Continuous Improvement Engineer is responsible for identifying, developing, and implementing mechanical solutions and/or process improvements to enhance efficiency, reduce costs, and improve product quality.

They work closely with production teams to analyse current processes, identify areas for improvement, and implement solutions that drive continuous improvement across the organization.

𝘿𝙪𝙩𝙞𝙚𝙨:
• Identify and implement improvements to production processes.
• Analyse manufacturing processes to identify waste, bottlenecks and opportunities for improvement.
• Drive Lean and Continuous Improvement initiatives.
• Design and develop jigs, fixtures, tooling and equipment improvements where required.
• Use engineering principles and CAD to develop practical solutions to manufacturing problems.
• Lead improvement projects from concept through to implementation.
• Collect and analyse production data to identify trends, root causes and opportunities.
• Conduct time studies and measure the impact of improvement initiatives.
• Investigate production problems and develop sustainable corrective actions.
• Work closely with Production, Engineering, Quality, Maintenance and Supply Chain.
• Coach team leaders, supervisors and operators when implementing improved processes and standards.
• Monitor and report on the performance and benefits of improvement initiatives.
• Support the implementation of a culture of continuous improvement across the plant.

𝙈𝙞𝙣𝙞𝙢𝙪𝙢 𝙍𝙚𝙦𝙪𝙞𝙧𝙚𝙢𝙚𝙣𝙩𝙨:
• BEng / BTech in Mechanical Engineering or Industrial Engineering.
• 1–5 years' experience in Mechanical Engineering, Industrial Engineering, Continuous Improvement or a manufacturing environment.
• Strong analytical and problem-solving ability.
• Good communication and interpersonal skills.
• Good organisational and project management skills.

𝘼𝙙𝙫𝙖𝙣𝙩𝙖𝙜𝙚𝙤𝙪𝙨 𝙀𝙭𝙥𝙚𝙧𝙞𝙚𝙣𝙘𝙚:
• Lean Manufacturing / Six Sigma.
• Continuous Improvement methodologies.
• SolidWorks or other 2D/3D CAD software.
• Advanced Excel.
• Minitab or other data analysis tools.
• Power BI / SQL.
• Manufacturing, fabrication, automotive, trailer or similar industrial experience.

𝙒𝙚 𝙖𝙧𝙚 𝙡𝙤𝙤𝙠𝙞𝙣𝙜 𝙛𝙤𝙧 𝙖𝙣 𝙀𝙣𝙜𝙞𝙣𝙚𝙚𝙧 𝙬𝙝𝙤 𝙞𝙨:
• Driven and takes ownership of their work.
• A natural self-starter who does not wait to be told what to do.
• Curious and enjoys understanding how things work.
• Practical and comfortable working on the factory floor.
• Analytical and able to use data to make decisions.
• A strong problem solver who looks for the root cause rather than treating symptoms.
• Comfortable communicating with both shop-floor employees and management.
• Able to work independently while collaborating with multiple departments.
• Energetic and eager to learn.

Candidate must be willing to relocate or travel to Worcester daily and must work the following shift: 06:00 – 14:30

Please submit a detailed CV with proof of academic records / certificates to 𝗰𝗮𝗿𝗲𝗲𝗿𝘀@𝗴𝗿𝘄.𝗰𝗼.𝘇𝗮. Send you salary expectations with your application.

Shortlisted candidates must attend an interview, urine test and full medical.

Closing date: 31 August 2026

𝘐𝘧 𝘺𝘰𝘶 𝘩𝘢𝘷𝘦 𝘯𝘰𝘵 𝘩𝘦𝘢𝘳𝘥 𝘧𝘳𝘰𝘮 𝘶𝘴 𝘸𝘪𝘵𝘩𝘪𝘯 𝘵𝘸𝘰 𝘸𝘦𝘦𝘬𝘴 𝘰𝘧 𝘵𝘩𝘦 𝘤𝘭𝘰𝘴𝘪𝘯𝘨 𝘥𝘢𝘵𝘦, 𝘱𝘭𝘦𝘢𝘴𝘦 𝘤𝘰𝘯𝘴𝘪𝘥𝘦𝘳 𝘺𝘰𝘶𝘳 𝘢𝘱𝘱𝘭𝘪𝘤𝘢𝘵𝘪𝘰𝘯 𝘢𝘴 𝘶𝘯𝘴𝘶𝘤𝘤𝘦𝘴𝘴𝘧𝘶𝘭. 𝘎𝘙𝘞 𝘏𝘰𝘭𝘥𝘪𝘯𝘨𝘴 (𝘗𝘛𝘠) 𝘓𝘵𝘥 𝘳𝘦𝘴𝘦𝘳𝘷𝘦𝘴 𝘵𝘩𝘦 𝘳𝘪𝘨𝘩𝘵 𝘵𝘰 𝘸𝘪𝘵𝘩𝘥𝘳𝘢𝘸 𝘵𝘩𝘪𝘴 𝘱𝘰𝘴𝘪𝘵𝘪𝘰𝘯 𝘢𝘵 𝘢𝘯𝘺 𝘴𝘵𝘢𝘨𝘦 𝘰𝘧 𝘵𝘩𝘦 𝘳𝘦𝘤𝘳𝘶𝘪𝘵𝘮𝘦𝘯𝘵 𝘱𝘳𝘰𝘤𝘦𝘴𝘴, 𝘪𝘧 𝘥𝘦𝘦𝘮𝘦𝘥 𝘯𝘦𝘤𝘦𝘴𝘴𝘢𝘳𝘺.

16/08/2026

𝗘𝗦𝗧𝗜𝗠𝗔𝗧𝗢𝗥

We are looking for an Estimator to join our team in Worcester.

𝙅𝙤𝙗 𝘿𝙚𝙨𝙘𝙧𝙞𝙥𝙩𝙞𝙤𝙣:

• Generate quotations and submit them to the Key Account Manager.
• Assist with costing upon closing of a job.
• Writing of technical specifications of certain products and communicating to production floor until job is closed
• Check in of Freight Carriers and ensure that the correct job number is assigned to the correct Freight Carrier
• Ensuring that any changes to the technical spec by the client is communicated to the Engineering Department and Production.
• Regularly updating Bill of Material for Standard Quotes

𝙍𝙚𝙦𝙪𝙞𝙧𝙚𝙢𝙚𝙣𝙩𝙨:
• Matric or equivalent certificate
• Previous experience in estimating and costing will be an advantage
• Experience in Costing Road Tankers Reefers and Dry Vans will be an advantage
• Using spreadsheets to do calculations.
• Able to read, understand and interpret applicable legal acts and regulations.
• Ability to work under pressure and meet deadlines.
• Ensuring all enquiries is handled promptly and accurately.
• Excellent administrative skills as well as numeracy competencies
• Computer literacy
• Strong communication skills (Verbal & Written)
• Attention to detail
• Must be willing to work shift as department or company requires.
• Valid driver’s license.

Start Date: As soon as possible
Salary: Market-related, based on experience
Position is based in: Worcester, Western Cape
Closing date: 23 August 2026

Send your application to 𝙘𝙖𝙧𝙚𝙚𝙧𝙨@𝙜𝙧𝙬.𝙘𝙤.𝙯𝙖. Please indicate for which vacancy you are applying for. Your application must include your qualifications and salary expectations.

06/08/2026

𝗜𝗻𝘁𝗲𝗿𝗺𝗲𝗱𝗶𝗮𝘁𝗲 𝗗𝗿𝗮𝘂𝗴𝗵𝘁𝘀𝗺𝗮𝗻

GRW Holdings is a highly regarded manufacturer of trailers and tankers for Local and international markets. The company is based in the picturesque town of Worcester, Western Cape.

We are looking for dynamic mechanical Intermediate Draughtsman to join the Engineering Department.

The successful candidate will report directly to the Engineering Manager.

Shortlisted candidates will be required to do a Drawing assessment.

Applications must be submitted before or on 𝟮𝟬 𝗔𝘂𝗴𝘂𝘀𝘁 𝟮𝟬𝟮𝟲.

𝙍𝙚𝙦𝙪𝙞𝙧𝙚𝙢𝙚𝙣𝙩𝙨:
- 2–3-year’s relevant experience (Mechanical Engineering environment)
- Experience in Automotive Industry would be advantageous.
- B tech or Technical Diploma is required
- Understanding of technical designs, drawings, and materials
- Computer literate
- Solid works experience is essential.
- Creo experience advantageous.

𝙏𝙮𝙥𝙞𝙘𝙖𝙡 𝙙𝙪𝙩𝙞𝙚𝙨 𝙬𝙤𝙪𝙡𝙙 𝙗𝙚:
- Conduct research.
- Interactions and negotiations with various departments and suppliers required in order to provide engineering deliverables.
- Responsible for providing relevant engineering deliverables including 3D CAD model, 2D Manufacturing & Assembly drawings, legislative documentation, and bills of material.
- Contribute towards process improvements.
- Compliance with safety requirements
- Conformance to GRW quality system requirements

𝘾𝙤𝙢𝙥𝙚𝙩𝙚𝙣𝙘𝙞𝙚𝙨:
- Accuracy and detail orientation
- Planning and organising
- Collaborative problem solving & decision making.
- Pro-activity & initiative
- Punctuality
- Teamwork
- Self-management and meeting deadlines

Candidate must be willing to relocate or travel to Worcester daily. Shift is 06:00 – 14:30 from Monday – Friday. Flexi hours or remote working hours might be considered.

Please send a detailed CV with certificates and salary expectations to [email protected].

𝘐𝘧 𝘺𝘰𝘶 𝘩𝘢𝘷𝘦 𝘯𝘰𝘵 𝘩𝘦𝘢𝘳𝘥 𝘧𝘳𝘰𝘮 𝘶𝘴 𝘸𝘪𝘵𝘩𝘪𝘯 𝘵𝘸𝘰 𝘸𝘦𝘦𝘬𝘴 𝘰𝘧 𝘵𝘩𝘦 𝘤𝘭𝘰𝘴𝘪𝘯𝘨 𝘥𝘢𝘵𝘦, 𝘱𝘭𝘦𝘢𝘴𝘦 𝘤𝘰𝘯𝘴𝘪𝘥𝘦𝘳 𝘺𝘰𝘶𝘳 𝘢𝘱𝘱𝘭𝘪𝘤𝘢𝘵𝘪𝘰𝘯 𝘢𝘴 𝘶𝘯𝘴𝘶𝘤𝘤𝘦𝘴𝘴𝘧𝘶𝘭. 𝘎𝘙𝘞 𝘏𝘰𝘭𝘥𝘪𝘯𝘨𝘴 (𝘗𝘛𝘠) 𝘓𝘵𝘥 𝘳𝘦𝘴𝘦𝘳𝘷𝘦𝘴 𝘵𝘩𝘦 𝘳𝘪𝘨𝘩𝘵 𝘵𝘰 𝘸𝘪𝘵𝘩𝘥𝘳𝘢𝘸 𝘵𝘩𝘪𝘴 𝘱𝘰𝘴𝘪𝘵𝘪𝘰𝘯 𝘢𝘵 𝘢𝘯𝘺 𝘴𝘵𝘢𝘨𝘦 𝘰𝘧 𝘵𝘩𝘦 𝘳𝘦𝘤𝘳𝘶𝘪𝘵𝘮𝘦𝘯𝘵 𝘱𝘳𝘰𝘤𝘦𝘴𝘴, 𝘪𝘧 𝘥𝘦𝘦𝘮𝘦𝘥 𝘯𝘦𝘤𝘦𝘴𝘴𝘢𝘳𝘺.

GRW South Africa

10/09/2026

02/09/2026

01/09/2026

28/08/2026

27/08/2026

24/08/2026

18/08/2026

18/08/2026

16/08/2026

06/08/2026

Address

Telephone

Website

Alerts

Contact The Business

Shortcuts

Share

Category

Listing takedown request