PD Tuning

Directions Website Contact the business

PD Tuning Need a tune? Maybe some advice? Message us with any questions.

10/13/2026

Jaden dropped off his super clean gen2 speed 3 for maintenance and let us do what we do best.

93& E30 mix tunes

365/346 on pump 93
412/386 on E30

Pnp intake manifold
Cs exhaust manifold
BNR s4 turbo
Cobb FMIC
Cobb catted DP
CS 4 inch intake
TIAL BOV
3 Inch CBE
DM stage 3 cc setup w/PCV
3 port EBCS
Bosch 3 bar map sensor.
Hpfp

Stock engine and stock fuel system currently but I am sure the customer is gearing up for port injection.

Connors car came in for diag due to odd issues. Rough startLumpy idle Misfires Timing codes Valvetrain noise The further...
09/21/2026

Connors car came in for diag due to odd issues.
Rough start
Lumpy idle
Misfires
Timing codes
Valvetrain noise

The further we dug the more issues we found until we found the nail in the coffin. Enjoy the pictures because this kind of stuff is the reason why we suggest letting experienced people help you with your builds.
This engine was assembled wrong and unfortunately for the owner he was sold something unaware of the issues the previous owner created.

I trust a stock engine more than most self assembled (built) engines at this point.

Stick with the mazdaspeed engine builders or ask us who we prefer.

09/17/2026

Carlos dropped his gen1 off with a slew of parts from his old speed.
We usually do not take customer supplied parts because of the headaches. (This car proved why)

We still returned him a banger on a STOCK ENGINE. **Customer requested we exceed the factory limitations. We advised against it and the customer assumed all responsibility**

Stock engine
Jmfab IM
6port injection
Full race em
Custom fmic w tr8 core
Gtx3071r ewg
Htp 4 inch intake
Act 6 puck clutch
Cs 3.5 inch downpipe
Cp-e cbe
Tuned by me on pump 93 and e48
413/389 on pump 93
500/443 on e48

08/28/2026

Got spinny drank on the dyno today after resolving an oil pump failure that almost made me build another engine.
New turbo dropped in (bnr s5) and added port injection so I can run full e85.
Pics in the comment of the goodies.

565/506

Built engine w stock valvetrain
Bnr s5 iwg
Damond 3.5 inch intake
damondmotorsports pi adapter
Revamp Motorsports wire tuck
PD Tuning Returnless pi w ethanol kit
PD Tuning cleaned and flow tested injectors
Ported stock intake manifold with all emissions components intact.
Some exhaust manifold that flowed decent.
Luk 10-64 clutch with fidanza flywheel (stock)

08/27/2026

Reece brought his car in with mechanical issue that were repaired by us.
After that we threw it on the dyno and started tuning.
93 octane 476/418
E48 642/518

Built engine w/ valvetrain
Pulsar 6262 .63 ar hotside
Speed performance pi with double pump
2000 cc injectors
Custom exhaust manifold
4 inch intake

Very proud of this young man and I know he will be back for more power soon.

Sold sold sold sold sold Bnr s4 turbo for sale New center section was installed by me. This was in my car for 4k miles ...
08/27/2026

Sold sold sold sold sold
Bnr s4 turbo for sale
New center section was installed by me.

This was in my car for 4k miles and I recently upgraded to an s5. So I put a new center section in it due to oil pressure concerns (engine).
Everything in the pictures is included and should be ready to drop in.

Evan C. Hotto dropped his engine off with a spin rod bearing. We swapped in an Overspeed Motorsports stage 1 engine bnrs...
08/08/2026

Evan C. Hotto dropped his engine off with a spin rod bearing.
We swapped in an Overspeed Motorsports stage 1 engine bnrs4 and some more goodies to compliment his already modified car.
Full Koni/ eibach/ cs/ spc suspension was also added to help with the increase in power.

Gen2 speed3
OS stage 1 engine
Bnr s4 v5
Damond 3.5 inch intake
Stock manifolds
Act 6 puck
Tr8 intercooler
Damond catch cans
Damond pmm and rmm (street)
Corksport catted 3 inch downpipe/cbe
Cs 3.5 bar map sensor
Grimmspeed 3 port EBCS
Pd tuning cleaned and flow tested injectors

Once break in was completed we started the process of tuning.
371/380 on pump gas
397/392 on an e 30 mix

Dyno video will be in the comments.

It’s Monday 🙄😑 We got this stock engine pulled on a gen2 speed 3 up next is a full build on stock fuel system. Jordan Ke...
07/20/2026

It’s Monday 🙄😑 We got this stock engine pulled on a gen2 speed 3 up next is a full build on stock fuel system.
Jordan Keefover stage 1
BNR Supercars, LLC bnr s4
Advanced Clutch 6 puck
Damond Motorsports intake, stage 3 catch can,engine mounts
CorkSport Performance tbe
Treadstone Performance Eng. tr8 fmic
Tuning will be completed with COBB Tuning ap v3

If you have maintenance or just need diag completed for your mazdaspeed 3/6 we do it all.

Cyrus brought his BNR S3v5 MS3 in for a dyno tune346/357 on 93 octane 392/409 on e30 This turbo hits hard and in our op...
07/02/2026

Cyrus brought his BNR S3v5 MS3 in for a dyno tune
346/357 on 93 octane
392/409 on e30
This turbo hits hard and in our opinion what should have came on all mazdaspeeds. We are running deals on dyno tuning through the month of August. Pm us for scheduling.

Today was a Subaru day 🚗💨💥😑😑😑😑😑😑Today Sean Greer VA WRX made me bleed my own blood🩸 ExtremeTurboSystems gesi j-pipe inst...
06/11/2026

Today was a Subaru day 🚗💨💥
😑😑😑😑😑😑
Today Sean Greer VA WRX made me bleed my own blood🩸
ExtremeTurboSystems gesi j-pipe install
Afterwards we got his COBB Tuning v3 ap and started tuning.

If this keeps up my kitten mittens will evolve into Man Paws

Staying busy 💜🖤

Address

12385 W 48th Ave
Wheat Ridge, CO
80033

Opening Hours

Monday 9am - 7pm
Tuesday 11am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Website

Alerts

Be the first to know and let us send you an email when PD Tuning posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to PD Tuning:

Shortcuts

Share

Category