CFM Innovations

CFM Innovations Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from CFM Innovations, Automotive Service, Pleasant Valley, NY.
(1)

All inquiries & appointments:
📧 [email protected]
📞 Call: 845-452-6928
🚫 No DMs — email or phone only Motorsports wiring Fabrication & Welding
Tuning

We convertered this ZR1 to a fueltech 550 ecu. We built a custom harness that retained all the factory HUD as well as ad...
07/21/2026

We convertered this ZR1 to a fueltech 550 ecu. We built a custom harness that retained all the factory HUD as well as adding a bunch of features like traction control, methanol injection, and progressive nitrous. zr1bros_ has an absolute unit and sweet street car.

Corvette C6 ZR1We installed a bunch of parts including supercharger solid spacer, upper blower pulley, intercooler brick...
05/15/2026

Corvette C6 ZR1
We installed a bunch of parts including supercharger solid spacer, upper blower pulley, intercooler bricks, monster triple disk clutch, DSX auxiliary fuel pump, ATI balancer, topped it off with a set of MRP 1200 injectors and an HP Tuners calibration. These are one of our favorite cars. Thanks for trusting us with your build.

This car happened to have a larger than most slave cylinder air gap. So we machined a spacer from aluminum to keep the slave cylinder concentric and the air gap in spec.

Better late than never decided 2 days before race he wanted to compete. I asked him if he was going to bring the big che...
04/02/2026

Better late than never

decided 2 days before race he wanted to compete. I asked him if he was going to bring the big check home and told me "f yeah".

So we got to work. Engine was hurt. We had a bare block Thursday. We still had to clearance the block for the CCW crank. Check bearing clearances / piston ring gaps, plus get it all assembled. Engine was assembled friday at 8pm. We had the engine in the car 10pm. Fired up and verified timing at 11:30pm. Quick 2 step check and loaded on trailer at 12pm.

Drove through the night, got to the track at 6am Saturday morning. Slept for a few minutes in the truck until the track opened.

Dave did was he does. Drove the wheels off this hot rod and took the big check home.

Thanks for the big check, looks good on the shop wall.

Twin turbo big block Chevy Camaro just got a serious upgrade with a Fueltech 600 install. Our harnesses are custom made ...
01/28/2026

Twin turbo big block Chevy Camaro just got a serious upgrade with a Fueltech 600 install. Our harnesses are custom made for great fit as well as function. We've got shock sensors, front wheel speed, driveshaft RPM, transmission line and converter pressure, transmission temp sensors, plus all the engine side sensors and boost control for maximum data. The car is now running smooth, and base timing is set. All the little details are wrapped up. Next stop, the dyno, then it's time to hit the track.
We love to see these cars drive out of our shop under their own power.

Address

Pleasant Valley, NY

Website

Alerts

Be the first to know and let us send you an email when CFM Innovations posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to CFM Innovations:

Shortcuts

Share

Category