Muscle Car Engines

Muscle Car Engines We supply the World with Muscle Car Turn Key, Ready to run right out of the box Engines

06/10/2026

383 Chevy/475 HP Street Stroker AFR Heads/Compcams Roller cam
💯 % Tested
As Shown $10,835.00

All our engines are

💯 %Tested & designed to run nice and cool, good vacuum, excellent oil pressure, power, and sound.

Website

www.enginefactory.com

Located in Lebanon Nj

Call or Text

908-323-5847

Email [email protected]

Easy Quote Form Link

https://enginefactory.com/request-a-quote/

https://enginefactory.com/letters/

383 Chevy 475 HP

Chevy Stroker Engines in Stock

Chevy Stroker 475 Horsepower

Will Replace Any Small Block Chevy
Without Modifications.



Priced as shown above $10,835.00
TURN KEY ENGINE.
ARRIVES READY TO RUN RIGHT OUT OF THE BOX!!

Our 475 HP Signed Edition Stroker Engine
Achieved 0-60 In 3.9 Seconds.

Late Model Roller Cam Block with One piece rear main seal

New Eagle Stroker Rotating Assembly

New I-Beam Connecting Rods, With 190,000 Psi Bolts

HD Silicone Pistons, requires 93 Octane

Speed Pro Moly Rings

Hydraulic Roller Camshaft, Duration @ 050- 242/248, Intake Lift .584 — Exhaust Lift .579

Double Roller Timing Set

Heavy Duty Trimetal Engine Bearings

Melling High Pressure Oil Pump # M55hp

Fel-Pro Gaskets

AFR Performance Heads with Screw in Rocker studs.

200 CC Intake Runners, 64 CC Combustion

New 2.02″ Intake Valves

New 1.60″ Exhaust Valves

10.5 to 1 Compression ratio, Pump Gas 93 Octane

Hi Rev Valve Springs, up to .600 Cam lift

Screw In Rocker Studs

1.46 Heavy Duty Valve Springs

New Hardened Pushrods, Guide Plates, And Roller Lifters

1.6 Roller Rocker Arms

New Oil Pan And Timing Cover

New TIG Welded Valve Covers

New Performance Harmonic Balancer Damper

New Flex-plate For Auto Trans (Std. Trans Flywheel Extra $250.00)

Aluminum Intake

Holley 750 CFM double pumper Carburetor

New HEI Electronic Distributor, or small body Distributor for firewall clearance

New Champion Spark Plugs & Taylor Ignition Wires, Electric Choke

Heavy Duty Wire Looms

New Thermostat Chrome Housing

New Fuel Pump

New Hard Tube Fuel Line With Filter

Braided Lines To Filter And Pump – Add $210.00

New Dip Stick And Tube, Oil Filter Housing And Oil Filter

New Air Cleaner, Complete P.C.V. Ventilation System

Live Run Video

Digital Pictures of Your Engine Being Built

$10,835.00 as shown in picture above

Packaged And Crated No charge.
No Core charge, Sold Outright

Additional cost of Options Below
Alternator system Add $990.00
Alternator and AC Add $2,180.00
Alternator and PS Add $1,970.00
Alternator PS and AC add $ 2,540.00
Holley Sniper electronic Fuel injection Add $2,350.00
Standard Balanced Flywheel Add $250.00
High torque starter Add $240.00

Serpentine Belt System for your Alternator, Power Steering & A/C

Chevy Valve Cover, Air Cleaner, Belt Systems, and Color Choices

Easy Quote Request
https://enginefactory.com/request-a-quote/






06/08/2026

All our engines are

💯 %Tested & designed to run nice and cool, good vacuum, excellent oil pressure, power, and sound.

Website

www.enginefactory.com

Located in Lebanon Nj

Call or Text

908-323-5847

Email [email protected]

Easy Quote Form Link

https://enginefactory.com/request-a-quote/

https://enginefactory.com/letters/

331 Ford 415 HP Stroker

As Shown $11,155.00

Will fit in place of any 289 or 302 Small Block Engine
Click on image above for detail view of our 331 Ford 415 HP

TURN KEY ENGINE.
ARRIVES READY TO RUN RIGHT OUT OF THE BOX!!

302 Ford Roller Block Meticulously Machined To Accept Stroker Crankshaft

New Eagle Cast Steel Stroker Crankshaft

New I-Beam Connecting Rods

10 To 1 Power Forged Pistons

Sealed Power Moly Rings

Double Roller Timing Set

Hydraulic Roller Camshaft

Clevite Street Racing Bearings

Engine Factory Series Aluminum Performance Heads

180 CC Intake Runners, 60 CC Combustion Chambers

New 2.02″ Intake Valves.

New 1.60″ Exhaust Valves.

9.8 Compression ratio, Pump gas 93 Octane

Hi Rev Valve Springs, up to 575 Cam lift

Screw in rocker studs

Chrome Moly Pushrods

Roller Rockers

Melling High Volume Oil Pump

Complete Fel-Pro Gasket Set

New Harmonic Balancer

New Automatic Transmission Flexplate

($350.00 For Steel Billet Std. Flywheel)

Chrome Oil Pan, Aluminum Timing Cover

Polished Chrome Valve Covers

New Aluminum Intake Manifold

Holley 670 CFM Carburator With Electric Choke.

Carburetor Fully Adjusted

New Water Pump

New High Volume Fuel Pump

Electronic Ignition Distributor, With 45,000 Volt Coil

Ignition Timing Set

New Champion Spark Plugs

Taylor 8mm Wires

New Chrome Thermostat Housing

Chrome Air Cleaner With Pcv Setup

New Fuel Lines

New Gas Filter

Hot Run Tested And Dialed In

Video Footage With Engine Running In Our Test Stand

$10,915.00

Ford Valve Cover Choices
Ford Optional Air Cleaners Choices
Ford Serpentine Setup Options
Ford Wire and Engine Paint Color Choices

Packaged And Crated No charge.
No Core charge, Sold Outright

Additional cost of Options Below
Alternator system Add $990.00
Alternator and AC add $2,180.00
Alternator and PS add $1,970.00
Alternator PS and AC add $ 2,540.00
Holley Sniper electronic Fuel injection add $2,350.00
Standard Balanced Flywheel add $325.00
High torque starter add $240.00

360 Mopar 400 HP400 LBS of TorqueEdelbrock Aluminum Heads/Edelbrock performer cam/ Holley Sniper 2 Fuel injected /Polish...
06/04/2026

360 Mopar 400 HP
400 LBS of Torque

Edelbrock Aluminum Heads/Edelbrock performer cam/ Holley Sniper 2 Fuel injected /Polished Wraptor pulley kit 💯 %Tested As Shown $17,240.00

All our engines are
💯 %Tested & designed to run nice and cool, good vacuum, excellent oil pressure, power, and sound.

Website
www.enginefactory.com

Located in Lebanon Nj

Call or Text
908-323-5847

Email [email protected]

Easy Quote Form Link
https://enginefactory.com/request-a-quote/

https://enginefactory.com/letters/

Shown with Optional Serpentine System

TURN KEY ENGINE.
ARRIVES READY TO RUN RIGHT OUT OF THE BOX!!

360 Chrysler Block w/Torque Plate Honed Cylinder Bores, Square Decked Block & Align Honed Main Housings
Chrysler Crankshaft
Hypereutectic Pistons
Moly Rings
Chrylser Connecting Rods
Clevite 77 Bearings
Edelbrock -2177 Hydraulic Camshaft, Duration @ 050, 204/204, Lift 420/420 110 Lobe sep
Hydraulic Lifters
New rocker arms & shafts
Edelbrock Aluminum Cylinder Heads # 60779
Harmonic Balancer
Edelbrock Air Gap Intake Manifold # 7576
Holley 750 Cfm Carburetor vacuum secondarys
Oil Pan And Pick Up
Mopar Cast Aluminum Valve Covers
Small cap Electronic Distributor
Spark Plugs And Wires
Chromally Push Rods
Water And Fuel Pump
Braided Fuel Lines Add $210.00
Automatic Flexplate
Engine Is Completely Assembled And Live Run Tested
$12,350.00 Plus options you Might choose Below

Options:
Packaged And Crated No charge.
No Core charge, Sold Outright

Additional Cost of Options Below
Add Alternator System Additional $990.00
Add Alternator and A/C Additional $2,180.00
Add Alternator and P/S Additional $1,970.00
Add Alternator P/S and A/C Additional $2,540.00
Add Holley Sniper II Electronic Fuel Injection Additional $2,350.00
Add Standard Balanced Flywheel Additional $325.00
High Torque Starter Additional $240.00

Easy Quote Request

Contact Bruce Direct 908-323-5847

Address

24 Cokesbury Road
Lebanon, NJ
08833

Opening Hours

Monday 10am - 4pm
Tuesday 10am - 4pm
Wednesday 10am - 4pm
Thursday 10am - 4pm
Friday 10am - 4pm

Alerts

Be the first to know and let us send you an email when Muscle Car Engines posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Muscle Car Engines:

Share