Injected Engineering

Injected Engineering
(254)

This Hellcat came in for diagnosis and a dyno evaluation to figure out why it wasn’t performing the way it should. The t...
06/16/2026

This Hellcat came in for diagnosis and a dyno evaluation to figure out why it wasn’t performing the way it should. The team was able to identify the issues, and now it’s getting injectors and a boosted pump to support the setup the right way.

Once that’s in, we’ll bring it all together with proper tuning to make sure everything is working the way it should.

This Hellcat ended up making 1133 whp.To get there, we upgraded the fuel system to a Level 4 Fore Innovations triple pum...
06/12/2026

This Hellcat ended up making 1133 whp.

To get there, we upgraded the fuel system to a Level 4 Fore Innovations triple pump setup, added head gaskets and studs, and dialed it in on E85.

Everything working together to support the power and make it show up on the dyno.

If you want to get your car over 1000 whp, this is the place to do it.

This Hellcat is getting drilled and slotted rotors with ceramic pads on all four corners. The kind of brakes this car de...
06/11/2026

This Hellcat is getting drilled and slotted rotors with ceramic pads on all four corners. The kind of brakes this car deserves.
From there, a pulley swap to get more air moving through the supercharger, followed by a full retune to make sure everything is dialed in and running the way it should. More boost, properly calibrated.

This Hellcat Redeye went from 705 to 792 whp thanks to our pump gas package, new spark plugs, and a stainless steel mid-...
06/04/2026

This Hellcat Redeye went from 705 to 792 whp thanks to our pump gas package, new spark plugs, and a stainless steel mid-pipe.

If you’re trying to get the most out of your setup, this is where it happens.

S197 in the shop for the right upgrades.Oil pump gears and sprocket to handle the load, VPM pulley to push performance, ...
06/02/2026

S197 in the shop for the right upgrades.

Oil pump gears and sprocket to handle the load, VPM pulley to push performance, and a throttle body upgrade to improve airflow.

All finished with E85 tuning to dial in the setup and make sure it delivers where it should.

If you’re looking for a place to upgrade your vehicle, look no more. This is your place.
Click the link in our bio to get started.

E85 opens the door to more power… if it’s done right.This S197 is in for tuning, dialing in fuel, timing, and everything...
05/31/2026

E85 opens the door to more power… if it’s done right.

This S197 is in for tuning, dialing in fuel, timing, and everything needed to take full advantage of the setup.

If you’re ready to get your car tuned the right way or take it to the next level, this is the place.

Click the link in our bio to schedule your appointment today.

Boosted cars need more than just power… they need the right support.This Yellow Cobra came in for a new clutch, supercha...
05/29/2026

Boosted cars need more than just power… they need the right support.

This Yellow Cobra came in for a new clutch, supercharger belt, and secondary serpentine belt to keep everything working together under load.
Making sure everything is solid, reliable, and ready to handle the power it’s built for.

Whatever your car needs… we’ve got it covered.From routine maintenance to full performance builds, we specialize in Ford...
05/26/2026

Whatever your car needs… we’ve got it covered.

From routine maintenance to full performance builds, we specialize in Ford and Mopar and do everything under one roof.

Have questions or ready to get started?
Give us a call or visit the link in our bio to schedule your appointment.

Unusual setup… same process.This Cherokee is in for diagnostics and tuning, going through every system, reviewing data, ...
05/22/2026

Unusual setup… same process.

This Cherokee is in for diagnostics and tuning, going through every system, reviewing data, and making sure everything is properly dialed in.

Because no matter how different the build is, the goal stays the same… make it perform at its best!

Anyone can work on a Mustang… not everyone can build one right.From keeping it reliable with proper maintenance to pushi...
05/22/2026

Anyone can work on a Mustang… not everyone can build one right.

From keeping it reliable with proper maintenance to pushing it into serious performance builds, we do it all under one roof.

This isn’t just another shop… this is where Mustangs get done right.

Address

3605 Kennesaw N Industrial Pkwy NW
Kennesaw, GA
30144

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+16784496871

Website

Alerts

Be the first to know and let us send you an email when Injected Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Injected Engineering:

Shortcuts

Share

Category