Dieselsite

Call Directions Website

Dieselsite DieselSite.com is your source for diesel parts and accessories to boost your power, performance, and fuel mileage.

WHO DESIGNED THIS MESS?!Changing a serpentine belt shouldn't require draining coolant and wrestling with a radiator hose...
11/20/2026

WHO DESIGNED THIS MESS?!

Changing a serpentine belt shouldn't require draining coolant and wrestling with a radiator hose!

But that's exactly the headache Ford handed 7.3L Powerstroke owners!

DIESELSITE MADE IT BETTER! Their Upper Radiator Hose Reroute puts an end to that nonsense! Built from tough, high-temperature silicone, it routes OUTSIDE the serpentine belt, making future belt changes a whole lot easier.

THE WAY IT SHOULD'VE BEEN DESIGNED IN THE FIRST PLACE!

Ready to fix Ford's mistake? Head over to the DIESELSITE website and check it out!

👇 7.3L owners, who's fought this ridiculous factory setup?

If you’re going back under the hood to fix a valve cover leak on your 6.5L, make it a one-time visit.The Heath Diesel Va...
11/14/2026

If you’re going back under the hood to fix a valve cover leak on your 6.5L, make it a one-time visit.

The Heath Diesel Valve Cover Stud Kit for 6.5L Chevy and GMC diesels gives you something to guide the cover and gasket into place while you get the nuts started. The studs fully engage the threads in the head for better clamping, helping keep oil where it belongs.

Each stud has an Allen socket for easy installation and removal, and the kit includes four longer studs for mounting accessory brackets.

Head to the DieselSite website and search 6.5L Valve Cover Stud Kit to grab a set before your next gasket job.

You pulled the ZF for a clutch job. Then you saw the groove in the input shaft. 🤦The DieselSite Input Shaft Repair Kit l...
11/14/2026

You pulled the ZF for a clutch job. Then you saw the groove in the input shaft. 🤦

The DieselSite Input Shaft Repair Kit lets you fix wear where the shaft rides in the pilot bearing and keep the gearbox together. A hardened sleeve gives the new pilot bearing a fresh surface to ride on, and a lip seal keeps grease in and grit out. We include the installation driver and a bushing for your clutch alignment tool so you can get back to the job you started.

Running a ZF5 or ZF6 behind a 6.9L or 7.3L Ford diesel? Head to the DieselSite website and search Input Shaft Repair Kit.

Going mechanical on your 6.5L wastegate? Give the belt a shortcut.On many GM 6.5L turbo diesels, the factory vacuum pump...
11/13/2026

Going mechanical on your 6.5L wastegate? Give the belt a shortcut.

On many GM 6.5L turbo diesels, the factory vacuum pump supplies vacuum to the turbo’s wastegate actuator. Switch to a spring-loaded controller like the Turbo Master, and it takes over wastegate duty. Once you’ve accounted for any other equipment that still needs vacuum, the pump can come out and our 6.5L Vacuum Pump Elimination Belt takes the shorter route around the remaining pulleys.

We make it from EPDM for A/C-equipped 1992–2000 Chevy and GMC 6.5L turbo-diesel pickups and SUVs, with separate belts for 1992–1995 and 1996–2000 models.

Head to the DieselSite website and search 6.5L Vacuum Pump Elimination Belt to grab the right one for your rig.

🇺🇸 This Veterans Day, the crew at DieselSite salutes the men and women who wore the uniform and answered the call. We ho...
11/11/2026

🇺🇸 This Veterans Day, the crew at DieselSite salutes the men and women who wore the uniform and answered the call. We honor the grit it took to see a hard job through, the commitment that kept you going through long stretches away from home, and the way you showed up for the people serving beside you.

To every veteran, across every branch and generation, you have our respect. Thank you for serving our country.

If there’s a veteran you’d like to honor today, tell us a little about them in the comments. We’d be proud to hear their story.

💪 GIVE YOUR 6.0L A SHOT OF ADRENALINE.Big injectors won’t do much bragging if your high-pressure oil pump can’t keep up....
11/07/2026

đź’Ş GIVE YOUR 6.0L A SHOT OF ADRENALINE.

Big injectors won’t do much bragging if your high-pressure oil pump can’t keep up. The DIESELSITE Billet Adrenaline HPOP for 2003–2004.5 Power Stroke trucks brings upgraded internals and a tough billet housing to the job—addressing the factory cast pump’s known weak points.

Choose slightly-above-stock output for stock through 190cc injectors, or step into the High Volume Adrenaline for larger injector combinations and room for future upgrades. The high-volume version works with stock setups, too, so you can build toward bigger plans.

Every pump is flow-tested before shipping and backed by a three-year, unlimited-mile warranty. Serious oil delivery, stronger pulling performance, and quicker startups start with a pump built to work.

Stop letting a tired HPOP call the shots. Find the right output for your truck on our website!

🔥 THAT WASTEGATE IS CLOCKING OUT EARLY.Your turbo is trying to do its job. The factory wastegate control? It can start l...
11/07/2026

🔥 THAT WASTEGATE IS CLOCKING OUT EARLY.

Your turbo is trying to do its job. The factory wastegate control? It can start letting exhaust energy sneak past the turbine before the intended boost target. That’s performance you’re leaving on the table.

The Turbo-Master Wastegate Controller puts your 24-valve 5.9L Cummins back to work, keeping the wastegate shut until the preset drive-pressure bypass point. You get steadier boost and stronger mid-to-upper-range performance—even with an otherwise stock engine.

Fully adjustable and a direct bolt-on replacement for the factory actuator, it gives you better control without buying a whole new turbo.

Available in Style #1 (TM24) and Style #2 (TM24A) for 1998.5–2007 applications. Match your turbo’s actual wastegate configuration to the photos on our website—especially if a previous owner got creative under the hood.

Make the hardware you already own pull its weight. Get your Turbo-Master on our website!

đź’§ PLASTIC IMPELLER. EXPENSIVE CONSEQUENCES.Your 6.4L Power Stroke works too hard to let a cracked water-pump impeller ru...
11/06/2026

đź’§ PLASTIC IMPELLER. EXPENSIVE CONSEQUENCES.

Your 6.4L Power Stroke works too hard to let a cracked water-pump impeller ruin its day—and your wallet. The factory plastic impeller can crack or separate from its hub, potentially damaging the front engine cover.

The DIESELSITE Billet Impeller Water Pump replaces that weak link with a stronger billet aluminum impeller, designed to move more coolant for better cooling and temperature management.

✅ Fits 2008–2010 Ford 6.4L Power Stroke
âś… Billet aluminum impeller
âś… Increased coolant volume
âś… Lifetime warranty

Put a better pump to work before the factory one puts your truck out of work. Get yours on our website!

đź’¨ ALL THAT BOOST, AND NOWHERE TO GO! đź”§Your turbo's working overtime, but your truck still feels like it's running out of...
10/31/2026

đź’¨ ALL THAT BOOST, AND NOWHERE TO GO! đź”§

Your turbo's working overtime, but your truck still feels like it's running out of breath? You might have a boost leak!

Before you start throwing expensive parts at the problem, find out where that pressure is escaping with the DIESELSITE Boost Leak Detector Tool!

This handy diagnostic tool lets you pressurize your intake system and track down those sneaky leaks hiding in intercooler boots, clamps, piping, and connections. No more guessing, chasing symptoms, or replacing perfectly good parts!

đź’Ş Available in 3-inch and 4-inch turbo inlet sizes, this tool is a must-have for troubleshooting lost power or checking your system after an upgrade. Just connect a standard air compressor, pressurize the system, and start hunting down those leaks!

đź”§ FIND THE LEAK. FIX THE PROBLEM. GET YOUR BOOST BACK!

💨 LOSING BOOST? YOUR BOOTS MIGHT BE TO BLAME! 🥾🥾Your 6.4L Power Stroke works hard to build boost. Don't let a worn-out i...
10/30/2026

💨 LOSING BOOST? YOUR BOOTS MIGHT BE TO BLAME! 🥾🥾

Your 6.4L Power Stroke works hard to build boost. Don't let a worn-out intercooler boot throw it all away!

The DIESELSITE Intercooler Boot for 2008–2010 Ford 6.4L Power Stroke trucks is built to take the heat, handle the pressure, and stay put when the boost comes on strong!

Here's what makes it better: Heavy-duty 5-ply reinforced construction, a fluorolastomer lining that resists heat and oil, and the strength to withstand up to 100 PSI of boost pressure!

Designed to replace the troublesome lower driver-side factory boot, it even comes with heavy-duty T-bolt clamps for a secure fit.

STOP LEAKING BOOST. START HOLDING POWER!

Address

7400 W Industrial Lane
Homosassa, FL
34448

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+18884143457

Alerts

Be the first to know and let us send you an email when Dieselsite posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Nearby autos & automotive services