Hank’s Automotive

Call Directions Website

Hank’s Automotive We can help you with all your automotive needs! General Maintenance to Diagnostics and Beyond!
(1)

This is why we don’t ignore battery corrosion.This terminal had enough corrosion built up that the connection itself was...
11/02/2026

This is why we don’t ignore battery corrosion.

This terminal had enough corrosion built up that the connection itself was damaged. A bad battery connection can cause slow cranking, intermittent no-starts, charging issues, flickering electrical systems, and plenty of headaches that can look like a much bigger problem.

Sometimes the fix is as simple as cleaning the connection. Other times, like this one, the terminal needs to be replaced so the battery can make a solid connection again.

If you’re seeing corrosion around your battery or your vehicle is starting inconsistently, have it checked before the connection leaves you stranded.

Hank’s Automotive Repair
📍7410 Division Ave S, Grand Rapids, MI 49548
📞616-827-5057
🌐https://hanksautomotivegr.com

Oil leaks don’t always mean something major inside the engine.This one needed a new oil pan and gasket. Over time, the p...
10/30/2026

Oil leaks don’t always mean something major inside the engine.

This one needed a new oil pan and gasket. Over time, the pan can rust, get damaged, or the gasket can start seeping and leave oil underneath the vehicle.

The important part is finding the actual source of the leak before replacing anything. Oil can travel down the engine and make it look like it’s coming from somewhere it’s not.

If you’re seeing oil spots in the driveway or noticing the oil level dropping between changes, bring it in and we’ll track down where it’s coming from.

Hank’s Automotive Repair
📍7410 Division Ave S, Grand Rapids, MI 49548
📞616-827-5057
🌐https://hanksautomotivegr.com

Want to add lights but there’s nowhere clean to mount them? Sometimes you have to make the space.This one needed a custo...
10/28/2026

Want to add lights but there’s nowhere clean to mount them? Sometimes you have to make the space.

This one needed a custom opening and mounting area so the new lights could sit where they belong without looking like an afterthought.

A clean install is more than just getting power to the lights — placement, mounting, wiring, and finishing the job so it looks like it belongs there all matter.

Thinking about adding work lights, reverse lights, or other auxiliary lighting to your truck? Bring us your idea and we’ll figure out the right way to make it happen.

Hank’s Automotive Repair
📍7410 Division Ave S, Grand Rapids, MI 49548
📞616-827-5057
🌐https://hanksautomotivegr.com

This tire is a good example of why alignment and suspension checks matter.One side is worn nearly smooth while the rest ...
10/26/2026

This tire is a good example of why alignment and suspension checks matter.

One side is worn nearly smooth while the rest of the tread still has life left. Wear like this usually tells us the tire isn’t contacting the road the way it should. Alignment can be part of it, but worn steering or suspension components can cause the same kind of problem.

Simply putting a new tire on without finding the cause can mean ruining another tire the exact same way.

If you notice uneven tread wear, your steering wheel pulling, or your vehicle wandering down the road, bring it in before a set of tires gets eaten up.

Hank’s Automotive Repair
📍7410 Division Ave S, Grand Rapids, MI 49548
📞616-827-5057
🌐https://hanksautomotivegr.com

Fresh suspension parts can make an older front end feel like a completely different vehicle.This one got new suspension ...
10/23/2026

Fresh suspension parts can make an older front end feel like a completely different vehicle.

This one got new suspension components, including a fresh lower control arm and sway bar link. Parts like these take a beating from potholes, rough roads, and everyday driving, and once the bushings or joints start wearing out, you can end up with clunks, loose steering, uneven tire wear, or a vehicle that just doesn’t feel as tight as it used to.

Replacing worn components helps restore proper suspension movement and keeps everything working together the way it should. After repairs like this, checking the alignment is always a good idea too.

If your vehicle is making front-end noise or feels loose going down the road, bring it in and let us take a look.

Hank’s Automotive Repair
📍7410 Division Ave S, Grand Rapids, MI 49548
📞616-827-5057
🌐https://hanksautomotivegr.com

A tailgate that won’t open isn’t always just a bad handle.This one had to come apart so we could get to the latch and wi...
10/21/2026

A tailgate that won’t open isn’t always just a bad handle.

This one had to come apart so we could get to the latch and wiring inside the tailgate. On newer trucks, the release can involve switches, actuators, wiring, and the latch itself, so the important part is finding out what actually failed before replacing anything.

If your tailgate is sticking, only opening sometimes, or not responding at all, don’t keep forcing it. That can turn a small issue into broken trim, a damaged latch, or wiring problems.

Hank’s Automotive Repair
📍7410 Division Ave S, Grand Rapids, MI 49548
📞616-827-5057
🌐https://hanksautomotivegr.com

This is the oil pump, and its job is to keep oil moving through the engine so bearings, camshafts, lifters, and other in...
10/19/2026

This is the oil pump, and its job is to keep oil moving through the engine so bearings, camshafts, lifters, and other internal parts stay lubricated. When oil pressure starts dropping, damage can happen quickly if the engine keeps running.

A failing pump can show up as a low oil pressure warning, ticking or knocking noises, or pressure readings that aren’t where they should be. Before replacing one, we always want to verify the actual oil pressure and make sure there isn’t another issue causing the problem.

If that oil pressure light comes on, don’t just keep driving and hope for the best. Get it checked before a lubrication problem turns into an engine replacement.

Hank’s Automotive Repair
📍7410 Division Ave S, Grand Rapids, MI 49548
📞616-827-5057
🌐https://hanksautomotivegr.com

Timing work is one of those jobs where being a tooth off can make all the difference.With the valve cover off, you can s...
10/16/2026

Timing work is one of those jobs where being a tooth off can make all the difference.

With the valve cover off, you can see the camshafts and timing chain that keep everything inside the engine synchronized. If the chain stretches, a tensioner starts to fail, or timing gets out of position, you can end up with rattling on startup, poor running, check engine lights, or in some engines, serious internal damage.

This isn’t a repair you want to guess on. Timing marks, tension, and component condition all have to be checked carefully before everything goes back together.

If your engine has a timing-related code, startup rattle, or just isn’t running right, bring it in and let us properly diagnose it.

Hank’s Automotive Repair
📍7410 Division Ave S, Grand Rapids, MI 49548
📞616-827-5057
🌐https://hanksautomotivegr.com

Depending on the vehicle, that can mean spark plugs, ignition components, filters, and checking for anything else that c...
10/14/2026

Depending on the vehicle, that can mean spark plugs, ignition components, filters, and checking for anything else that could be hurting performance. Worn plugs can cause hard starts, misfires, poor fuel mileage, or just make the engine feel sluggish.

Keeping up on basic maintenance like this can save a lot of headaches later and helps the engine do its job without working harder than it needs to.

If your vehicle is due for maintenance or just doesn’t seem to run as smooth as it used to, bring it in and we’ll take a look.

Hank’s Automotive Repair
📍7410 Division Ave S, Grand Rapids, MI 49548
📞616-827-5057
🌐https://hanksautomotivegr.com

This is the vehicle’s engine control module, or ECM. It takes information from sensors all over the vehicle and uses it ...
10/12/2026

This is the vehicle’s engine control module, or ECM. It takes information from sensors all over the vehicle and uses it to control things like fuel delivery, ignition timing, throttle operation, and emissions systems.

When a module starts to fail, the symptoms can be all over the place — intermittent no-starts, communication faults, warning lights, poor running, or systems that stop responding correctly. That’s why proper testing matters before condemning a module. These aren’t parts you want to replace just because a code points in that direction.

If your vehicle is having electrical or communication issues that nobody can seem to pin down, bring it in and let us diagnose it properly.

Hank’s Automotive Repair
📍7410 Division Ave S, Grand Rapids, MI 49548
📞616-827-5057
🌐https://hanksautomotivegr.com

Address

7410 Division Avenue
Grand Rapids, MI
49548

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+16168275057

Alerts

Be the first to know and let us send you an email when Hank’s Automotive posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Nearby autos & automotive services