Mechanica Design

Directions

Mechanica Design Doing weird science to restore and hotrod a Volvo 1800ES with readily available tools

Trying a kustom color that I invented , that’s half way between SAAB 305 and Opel GDS True Blue Trying to approximate th...
11/05/2026

Trying a kustom color that I invented , that’s half way between SAAB 305 and Opel GDS True Blue

Trying to approximate the blue on the most beautiful car ever made , the 250 GTE 2+2

Note because of the light and my phone those look WAY darker than they are

11/05/2026

Wheel wells prepped for paint

11/02/2026

Getting this engine bay prepped for paint , unreal how much work is involved .

Let’s strip
10/24/2026

Let’s strip

Absolutely UNREAL how much work there is getting this engine bay and front end clean and ready for paint
10/23/2026

Absolutely UNREAL how much work there is getting this engine bay and front end clean and ready for paint

And we’ve welded up frame cracks ! Take a look at these other pics here to see after and before . Looks like full pe****...
10/21/2026

And we’ve welded up frame cracks ! Take a look at these other pics here to see after and before . Looks like full pe*******on inside .

Well s**t, have a cracked frame 🤬🤬🤬This where the left steering arm bolts to frame . Anyone seen this .Took some inside ...
10/21/2026

Well s**t, have a cracked frame 🤬🤬🤬

This where the left steering arm bolts to frame . Anyone seen this .

Took some inside pics , but I already painted inside so can’t see cracks , but can see where the lower reinforce block is welded to frame on inside .

Note the circular crack where the steering box bolts , this is exactly *INSIDE* the compression tube , so they tightened the steering box without a washer , and this sheared the frame inside the tube . So it didn’t really have a proper load path to the frame .

So my interpretation is the compression tube acted like a pivot , bolt pulled steel inward , steel pulled against the weld in the reinforce block , so we get these crack on both sides .

Think I might drill the hole ends and try to TIG the cracks without filler , then add a triangular reinforce on outside and plug weld in.

Getting the underside ready for paint
10/20/2026

Getting the underside ready for paint

My Volvo 1800ES had this bizarre hole punched through the firewall with a freaking awl, nobody really knows why but best...
10/12/2026

My Volvo 1800ES had this bizarre hole punched through the firewall with a freaking awl, nobody really knows why but best guess is dealer wanted to install AC, or some other dealer thing , like the Awl punched hole into the wheel well for antenna .

Anyways that hole is now GONE, along with the antenna hole, side hole and front rust pinholes .

I’m now putting together a video on different techniques for patching different kinds of holes .

I’m testing out colors and getting some gun practice , but damn this SPI clear is ridiculously easy to paint . I’m NOT A...
10/07/2026

I’m testing out colors and getting some gun practice , but damn this SPI clear is ridiculously easy to paint . I’m NOT A PRO, it’s been a while since I’ve shot a car , but I’ve never had a clear this easy to paint , it just atomizes perfectly , Black Widow , 27 lbs, 6” distance , and you can lay this on way thicker than i would have expected . I had a couple goofs on the hood , and yes it does have dust , but this is just practice , and it lays down like glass .

Colors here are Porsche Gemini Blue and Aston Martin Almond Green, last pic is a render of what I want the final to look like .

Address

5080 W State Road 46
Bloomington, IN
47404

Website

Alerts

Be the first to know and let us send you an email when Mechanica Design posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Nearby autos & automotive services