Revington TR

Directions Website

Revington TR Subscribe to our Newsletter! http://www.revingtontr.com/shop/collection_display.asp?CID=1097 Specialising in parts for TR2-TR6.

Renowned for our suspension packages for all models and knowledge of fuel injection on this model range.

A lovely review from Tony following his recent visit to our rolling road for a tune-up!At Revington TR, we have the Big ...
29/10/2026

A lovely review from Tony following his recent visit to our rolling road for a tune-up!

At Revington TR, we have the Big Three to ensure your Lucas PI (petrol injection) car is running exactly as it should!

1. An 800hp rolling road

We have an 800hp rolling road (although we’ve yet to see a TR come anywhere close to that figure… but we’d certainly love to! ). This allows us to run your car under load in the workshop while using a gas analyser to measure and display the completeness of combustion.

2.Specialist metering unit software

We use a specially designed computer program to calculate how much fuel the metering unit should deliver at different vacuum levels. This allows us to fine-tune the metering unit precisely, helping to ensure the correct amount of fuel is delivered throughout the engine’s operating range.

3. Experience that makes the difference

Having the right equipment is fantastic but understanding the information it provides is what really counts!
Fortunately, our workshop technicians have over 40 years of experience between them. This knowledge allows us to interpret the results and make the adjustments needed to achieve the best possible balance of performance, smooth running, and fuel economy for each individual car

If you would like to read more about the fuelling requirements and tuning of the Lucas injection TRs, please see our information sheet IS0006 on our website or click the link below:
https://www.revingtontr.com/tr6cp/information-sheets/is0006

And it’s not just TRs!

Our 800hp rolling road can help owners of other classic cars from this era, too. If your car has a fuelling system we’re familiar with, we’d love to help you get the best out of your engine.

Get in touch with us at [email protected] to find out whether we can help with your car.

With modern electrical devices becoming an essential part of everyday life, having convenient power in the cockpit is in...
23/10/2026

With modern electrical devices becoming an essential part of everyday life, having convenient power in the cockpit is increasingly important.

Recently in the workshop we have fitted this dual 12V power socket with a USB charging port, positioned beneath the dashboard for easy access. The built-in voltage display also provides a handy indication of the vehicle’s electrical system voltage.

Looking to have a power port fitted to your vehicle, but this style isn’t quite what you’re after? At Revington TR workshops, we can offer a wide range of options to suit your needs.

If you would like to discuss the options available please email [email protected]

————————————————————————

Our workshop is at your disposal for anything from an oil change to a full restoration. Notably, we have an 800-horsepower rolling road for engine tuning.

To contact us about booking your car in, email [email protected]

Don’t forget to check out our sale section on the website — we are always adding new items!

Click the link in our bio or visit https://www.revingtontr.com/sale

This is something we see all too often in the workshop. The standard diff mounts on the TR4A-6 are very prone to crackin...
07/10/2026

This is something we see all too often in the workshop. The standard diff mounts on the TR4A-6 are very prone to cracking, and it’s often something that can easily be overlooked until it’s too late.

This is a great example of a crack that had progressed to the point where it had become a serious and a potentially dangerous issue. On this car, there were also signs that the crack had previously been ‘repaired’. However, without the appropriate strengthening, this only prolonged the inevitable failure.

Thankfully, we caught this one before it could cause any further damage. In this instance, we had to carry out a repair to the chassis before we could install the strengthening kit.

Diff strengthening is an important piece of preventative maintenance, whether you’re building a chassis up from scratch or simply looking to maintain your current chassis.

We offer two versions of our diff strengthening kit:
Body-on chassis kit – RTR7012-2K
Body-off chassis kit – RTR7012-1K

We also offer a front suspension strengthening kit for TR4A–TR6 – RTR7017K.

If you would like us to check your chassis and/or install the strengthening kit, please get in touch via email:

[email protected]

A few lovely words from Chris. Chris originally came to us for a rolling road tune and a rear damper conversion.While tu...
06/07/2026

A few lovely words from Chris.

Chris originally came to us for a rolling road tune and a rear damper conversion.

While tuning the car we found the fuel pump not outputting the correct pressure, even though it was only 2 years old! We tried to increase the pressure on the prv but could not get it any higher than 80 psi, we ideally like to see 105 psi for optimum performance.
After discussing the findings with Chris, we decided the best course of action was to replace both the PRV and the fuel pump to ensure maximum reliability and performance.

We fitted our Fuel Pump & PRV Kit (Part Nos. RTR4050XK & RTR4456K). These kits have proven their reliability time and time again—most notably in Neil’s own Targa TR5, which has covered hundreds of thousands of miles over the past 20 years in countries around the world, across a huge range of altitudes and temperatures, without a single issue.

————————————————————————

Our workshop is at your disposal for anything from an oil change to a full restoration. Notably, we have an 800-horsepower rolling road for engine tuning.

To contact us about booking your car in, email [email protected]

Don’t forget to check out our sale section on the website — we are always adding new items!

Click the link in our bio or visit https://www.revingtontr.com/sale

19/05/2026

A new shipment of Mackay hoses in from Australia.
We are now fully stocked with future supplies of our hose kits and individual hoses. We have been selling these hoses for over 20 years without a single failure.
We also fit these hoses in our workshops where reliability is paramount

A common issue we see in the workshop is worn or missing throttle pedal bushes, along with bent throttle stops.These pro...
10/04/2026

A common issue we see in the workshop is worn or missing throttle pedal bushes, along with bent throttle stops.

These problems can leave your throttle feeling loose and unresponsive, impacting overall driving performance.

To resolve these issues we:
- Straighten and reinforce the throttle stop with a welded bracket to prevent future bending
- Install high-quality SuperPro pedal bushes (SPF0982) for a tighter, more precise feel

If your throttle pedal has excessive play and you want sharper, more responsive acceleration, get in touch with us today

————————————————————————

Our workshop is at your disposal for anything from an oil change to a full restoration. Notably, we have an 800-horsepower rolling road for engine tuning.

To contact us about booking your car in, email [email protected]

Don’t forget to check out our sale section on the website — we are always adding new items!

Click the link in our bio or visit https://www.revingtontr.com/sale

Our seats are still a popular upgrade for TRs. They provide comfort and security, whilst being as wide as possible given...
27/03/2026

Our seats are still a popular upgrade for TRs. They provide comfort and security, whilst being as wide as possible given the cabin size of a TR. Standard pricing is for a black seat with white or black piping. Alternative seat and piping colours are available at an additional cost. (Part number RTR6125)

These seats pair perfectly with a roll over bar, harness bar, and harnesses (part numbers RTR9053, RTR9148HB, and RTR9249). The harness bar can also be used individually with a set of harnesses, if preferred.

————————————————————————

Our workshop is at your disposal for anything from an oil change to a full restoration. Notably, we have an 800-horsepower rolling road for engine tuning.

To contact us about booking your car in, email [email protected]

Don’t forget to check out our sale section on the website — we are always adding new items!

Click the link in our bio or visit https://www.revingtontr.com/sale

24/03/2026

are now in a position where we are actively looking for an experienced self employed Historic & Classic Vehicle Engineer / Mechanic, based at our Wrington workshop.

Approximately two days per week needed, with a potential to increase if required.
This is not an apprenticeship position, the candidate MUST be able to work to an extremely high standard, unsupervised and with a background and technical knowledge of Historic & Classic vehicles.

Please contact Rachel via email at
[email protected]

Alternatively visit our website www.wolf-developments.com

Neil & Sue are taking on the Balkans Rally!! 🚙Next week, Neil & Sue are setting off for a month long rally in the Works ...
23/03/2026

Neil & Sue are taking on the Balkans Rally!! 🚙

Next week, Neil & Sue are setting off for a month long rally in the Works TR4 Rally car registered 6VC 👌🏽

They will be taking part in Malcolm McKays Balkans Rally, run under the banner of Classic Rally Press Ltd, here’s the map 🗺️ extract that gives some idea of some of the places they will be visiting

This is a return visit for 6VC to this area as the car, which was part of the works Competition Department from early 1962, was part of the works team that campaigned the 1963 Liege-Sofia-Liege.

The event was a grueling affair with most of the field falling by the wayside.

Only a handful of cars reached the finish none of which were from the works team.

6VC was a high-speed support car, not competing as such but very much present.

We hope to bring you updates along the way!!

One of the most commonly fitted upgrades in our workshop is the Axial fuel pump kit (part number RTR4050XK), along with ...
20/03/2026

One of the most commonly fitted upgrades in our workshop is the Axial fuel pump kit (part number RTR4050XK), along with our fuel pressure regulator kit (part number RTR4456K). This week alone, we have installed three of these kits.

We are frequently removing both standard and aftermarket systems that have proven to be substandard. In contrast, our pump kits have demonstrated outstanding reliability since we first devisedthe system back in 1987.

When installing the fuel pump kit, we always recommend pairing it with our auxiliary fuse box kit (part number RTR8270K). In addition, we always wire in a relay for the fuel pump. This is essential, as modern pump systems require around 13 amps, compared to just 3 amps for the original setup. This is a commonly overlooked detail when installing aftermarket pump kits.

————————————————————————
Our workshop is at your disposal for anything from an oil change to a full restoration. Notably we have an 800 horsepower rolling road for engine tuning.

To contact us about booking your car in, email [email protected]

Don’t forget to check out our sale section on the website, we are always adding new items!

Click the link in the bio or visit https:// www.revingtontr.com/sale

Address

Thorngrove Barns Unit 1
Middlezoy
TA70PD

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm

Alerts

Be the first to know and let us send you an email when Revington TR posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Nearby cars & car services