Elite Automotive & Performance

Elite Automotive & Performance Elite Automotive is a fully licensed small mechanical business located in Byford WA.

We take pride in all of our work and customer service is very important to us! Contact us for more information.
πŸ“§ [email protected]
πŸ“ž 0488 034 470

This 1950 Chev Pickup all finished after completing a LS  6ltr engine conversion. The vehicle arrived to us with the eng...
26/08/2026

This 1950 Chev Pickup all finished after completing a LS 6ltr engine conversion.

The vehicle arrived to us with the engine and transmission already mounted, and we took care of the rest to get this old-school pickup back on the road.

Here’s a quick rundown of what we carried out:

βœ… Elite Automotive camshaft package
βœ… LS7 lifter package
βœ… Oil pump package
βœ… Complete fuel system with new fuel lines front to rear
βœ… Aeromotive fuel regulator
βœ… Custom alloy drop tank fabricated by RPM Fabrication, with internal fuel pump hanger supporting a Walbro fuel pump
βœ… Transmission cooler fitted with new braided lines
βœ… Alloy radiator with SPAL fan & shroud
βœ… Custom stainless twin 3-inch exhaust system to the existing exhaust stacks
βœ… Front coilovers fitted to the existing Mustang II front-end conversion
βœ… Holley EFI Terminator X management system running the 6.0L with DBW throttle
βœ… Dyno tuned by Power Management Solutions

If you’re looking at an engine conversion or any performance modifications, get in touch with the team today.

πŸ“§ [email protected]
πŸ“ž 0488 034 470

Another 416ci LS engine all finished up and ready to be fitted into the vehicle! πŸ’ͺ🏼πŸ”₯This one is running none other than ...
14/08/2026

Another 416ci LS engine all finished up and ready to be fitted into the vehicle! πŸ’ͺ🏼πŸ”₯

This one is running none other than the Harrop 2650 Race Port, complete with the upgraded supercharger lid and billet brick, paired with a massive 115mm throttle body.

There will do more of a run down once fitted to the vehicle.

600HP πŸ’ͺ🏼This VZ Maloo is all finished up after receiving an LSA supercharger conversion along with a TH400 transmission ...
19/07/2026

600HP πŸ’ͺ🏼

This VZ Maloo is all finished up after receiving an LSA supercharger conversion along with a TH400 transmission upgrade. Here’s a rundown of what was involved to complete this package:

βœ… Elite Automotive camshaft package with supporting components
βœ… ARP hardware throughout the engine
βœ… Stainless steel Ferrea valves
βœ… Genuine GM LSA 1900 supercharger
βœ… Custom built water reservoir and front mount heat exchanger
βœ… Surge tank with twin Walbro fuel pumps, controlled by our in-house built fuel pump controller
βœ… 1000cc injectors, tuned on 98 octane fuel
βœ… TH400 transmission conversion with transbrake, B&M Pro Ratchet shifter and custom tailshaft
βœ… TCE billet base high-stall converter
βœ… Dyno tuned by Tune Corp, producing 600HP on 98 octane

If you’re looking to upgrade your vehicle with a supercharger package or any performance modifications, get in touch with the team today.

πŸ“§ [email protected]
πŸ“ž 0488 034 470

640 HP πŸ’ͺ🏼This VK SS Brock has undergone a complete driveline transformation and is now powered by a brand-new LS3 engine...
12/07/2026

640 HP πŸ’ͺ🏼

This VK SS Brock has undergone a complete driveline transformation and is now powered by a brand-new LS3 engine topped with a 1900 LSA supercharger and the new Harrop Engineering low-profile billet lid.

Here’s a rundown of what went into this package:

βœ… Brand new LS3 crate engine
βœ… Elite Automotive camshaft package with supporting components
βœ… 1900 LSA supercharger with 10% overdrive boost upgrade
βœ… Harrop Engineering low-profile billet supercharger lid
βœ… Custom water reservoir tank and front-mounted heat exchanger
βœ… PWR radiator coated in black
βœ… Power steering and air conditioning retained
βœ… TCE billet high-stall converter
βœ… 4L65E automatic transmission
βœ… Large Salisbury differential fitted with 3.7:1 gears
βœ… Factory long-range fuel tank with a boot-mounted surge tank running twin Walbro fuel pumps, controlled by an Elite Automotive fuel pump controller
βœ… The Castlemaine Rod Shop extractors paired with our in-house fabricated single 3.5-inch stainless steel exhaust featuring twin MagnaFlow mufflers
βœ… Dyno tuned by Tune Corp, producing 640 HP on 98 octane fuel

If you’re looking to upgrade your vehicle with a supercharger package or any performance modifications, get in touch with the team today.

πŸ“§ [email protected]
πŸ“ž 0488 034 470

810HP πŸ’ͺ🏼πŸ’ͺ🏼Matt’s VE Clubsport is all finished up after receiving a single turbo kit along with all the supporting upgrad...
05/07/2026

810HP πŸ’ͺ🏼πŸ’ͺ🏼

Matt’s VE Clubsport is all finished up after receiving a single turbo kit along with all the supporting upgrades needed to complete the package. Here’s a quick rundown:

βœ… KillaBoost Manifolds LS turbo kit featuring a PSR G42 turbo, Turbosmart 60mm wastegate, 300x600x100 front-mount intercooler, and a custom fabricated 4-inch dump pipe into the existing twin 3-inch exhaust

βœ… Elite Automotive camshaft package with all supporting components

βœ… ARP head studs

βœ… Stainless steel Ferrea valves

βœ… CNC-ported square-port cylinder heads

βœ… NPC twin-plate clutch

βœ… Aftermarket Industries fuel pump module with upgraded fuel lines from front to rear, Aeromotive fuel pressure regulator, Fuel pumps are controlled by an Elite Automotive fuel pump controller, all running on E85 🌽

βœ… 1650cc injectors

βœ… Dyno tuned by Tune Corp, producing an impressive 810HP on a stock bottom end LS3

While the vehicle was with us, we also organised for the team at Central Restorations to carry out a complete respray on the vehicle

For all your Maintenance and performance upgrades, get in touch with the team today.

πŸ“§ [email protected]
πŸ“ž 0488 034 470

VL Berlina turbo all finished up after a big birthday for the guys over at Central Restoration. βœ… Factory turbo rebuilt ...
27/06/2026

VL Berlina turbo all finished up after a big birthday for the guys over at Central Restoration.

βœ… Factory turbo rebuilt & hi-flowed
βœ… Factory intake manifold sandblasted, all bolts & components zinc coated
βœ… Fresh red wrinkle finish rocker cover
βœ… Catch can
βœ… Billet fuel rail with turbo smart reg & a set of 730cc injectors
βœ… New long range fuel tank & sender with a walbro fuel pump
βœ… Harrop Engineering tru trac diff centre along with 3.7 gear ratio
βœ… Every suspension bush under the vehicle has been replaced an a set of upgraded rod shop lower & upper arms in the rear
βœ… Rebuilt Transmission along with a upgraded transmission cooler & a B&M pro ratchet shifter

Next stop down to the guys at Single Cam Central for a haltec ecu & dyno tuning

For all your Maintenance and performance upgrades, get in touch with the team today.

πŸ“§ [email protected]
πŸ“ž 0488 034 470

630HP πŸ’ͺ🏼This VF SS Ute is all finished up after receiving one of our entry level Harrop Engineering 2650 Supercharger Pa...
21/06/2026

630HP πŸ’ͺ🏼

This VF SS Ute is all finished up after receiving one of our entry level Harrop Engineering 2650 Supercharger Packages.

Here’s a quick rundown of the upgrades we carried out to complete this package.

βœ… Elite Automotive & Performance camshaft package with supporting components
βœ… ARP hardware throughout the engine
βœ… TCE high-stall converter
βœ… Harrop Engineering 2650 supercharger kit
βœ… Harrop Engineering billet coil covers
βœ… KPM fuel pump upgrade (98 octane) ⛽️
βœ… Upgraded Brembo brake package
βœ… Custom dyno tune by Tune Corp
βœ… Final result: 630HP

For all your supercharger packages and performance upgrades, get in touch with the team today.

πŸ“§ [email protected]
πŸ“ž 0488 034 470

700+ HP πŸ’ͺ🏼This HZ is all finished up after a 6.0L engine replacement and a Harrop Engineering 2650i supercharger convers...
13/06/2026

700+ HP πŸ’ͺ🏼

This HZ is all finished up after a 6.0L engine replacement and a Harrop Engineering 2650i supercharger conversion.

βœ… L98 6.0L engine
βœ… Crow camshaft with supporting components
βœ… ARP head studs, LS7 lifters & LSA head gaskets
βœ… Harrop Engineering 2650i supercharger kit
βœ… Harrop lid upgrade with upgraded intercooler brick
βœ… Harrop Engineering billet fuel rails
βœ… 1650cc injectors
βœ… Boot-mounted surge tank, twin Walbro fuel pumps, upgraded fuel lines & Turbosmart fuel pressure regulator
βœ… Unwanted Automotive custom catch cans & supercharger water reservoir tank
βœ… Unwanted Automotive twin 3 inch stainless exhaust system
βœ… TCE converter to suit the existing 4L80E transmission
βœ… Holley EFI management system supplied & installed by Ignite Auto Electrics
βœ… Dyno tuned by Jeff, now producing 716 HP on E85 🌽

For all your supercharger packages and performance upgrades, get in touch with the team today.

πŸ“§ [email protected]
πŸ“ž 0488 034 470

840HP!!  HQ Coupe all finished up after an LSA / Harrop Engineering 2650i & 4L80E conversion. πŸ’ͺ🏼Here’s a quick rundown o...
07/06/2026

840HP!!

HQ Coupe all finished up after an LSA / Harrop Engineering 2650i & 4L80E conversion. πŸ’ͺ🏼

Here’s a quick rundown of what went into the build:

βœ… LSA crate engine
βœ… Crow camshaft with supporting valvetrain upgrades
βœ… BTR shaft mount rockers
βœ… Hand-ported cylinder heads
βœ… Stainless steel Ferrea valves
βœ… ARP hardware throughout the engine
βœ… Harrop engineering 2650i supercharger
βœ… Harrop 115mm throttle body
βœ… Harrop supercharger lid upgrade
βœ… Harrop billet fuel rail kit
βœ… 1650cc injectors
βœ… Complete E85 fuel system featuring a surge tank with twin Walbro fuel pumps controlled by the Holley ecu
βœ… 4L80E automatic transmission
βœ… TCE torque converter
βœ… RPM Fabrication custom water reservoir tanks, catch can and custom 5-inch air intake
βœ… Custom twin 3.5-inch stainless steel exhaust with MagnaFlow mufflers, fabricated in-house
βœ… Holley EFI Terminator engine management with a 12-inch Holley digital dash supplied & fitted by Ignite Auto Electrics
βœ… Dyno tuned by Jeff now making 840hp @ 7400 on 19PSI on e85 🌽

For all your supercharger packages and performance upgrades, get in touch with the team today.

πŸ“§ [email protected]
πŸ“ž 0488 034 470

1000HP+ πŸ’ͺ🏼VF GTS all finished up after some major upgrades, now powered by a Harrop Engineering supercharged 416ci strok...
28/05/2026

1000HP+ πŸ’ͺ🏼

VF GTS all finished up after some major upgrades, now powered by a Harrop Engineering supercharged 416ci stroker engine.

βœ… 416ci stroker engine featuring an alloy engine block, 4.000” stroker crankshaft, H-beam connecting rods, CP Bullet pistons, CNC ported cylinder heads with upgraded stainless valves, ARP hardware throughout the engine & a custom Crow camshaft package with all supporting components
βœ… Harrop Engineering 2650 Race Port supercharger
βœ… Harrop Engineering 115mm throttle body
βœ… Harrop Engineering upgraded supercharger lid
βœ… Harrop Engineering billet fuel rails
βœ… 1650cc injectors
βœ… Aftermarket Industries fuel system running on E85 🌽
βœ… NPC performance clutch upgrade
βœ… Dyno tuned by Tune Corp

Now making an impressive 1060 RWHP on E85 🌽

For all your supercharger packages and performance upgrades, get in touch with the team today

Address

18 Nettleton Road
Byford, WA
6122

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 12pm

Telephone

+61488034470

Alerts

Be the first to know and let us send you an email when Elite Automotive & Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Elite Automotive & Performance:

Shortcuts

Share