Fuel Flow

Fuel Flow Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Fuel Flow, Automotive, aircraft & boat, mabelreign, Harare.

We offer
•Cylinder head porting & polishing.
•Throttle body widening gas flowing.
•Cylinder head gas flowing.
•Intake & exhaust manifold gas flowing.
•Petrol injector service,flow testing.
•Diesel injector service.
•Engine carbon cleaning.

Diesel engine egr valve cleaning done in house. Save fuel and have a smoother running engine. 0784728035
08/06/2022

Diesel engine egr valve cleaning done in house.
Save fuel and have a smoother running engine.
0784728035

Let us solve these error codes perminatly0784728035
30/05/2022

Let us solve these error codes perminatly
0784728035

Throttle bodiesThe most common symptom of a bad throttle body is a "check engine" light on the dashboard. You may also n...
30/05/2022

Throttle bodies

The most common symptom of a bad throttle body is a "check engine" light on the dashboard. You may also notice signs like rough idle, rough acceleration, or misfires during acceleration. High or low Idle RPM is also quite common when your throttle body is bad.
•High fuel consumption
•Rough idle
•High idling
•Poor acceleration
•Check engine light
•Jerking

If you experiencing one of these problems get in touch.

0784728035

Porting, polishing and gas flowing on all cylinder heads, throttle bodies and manifolds
29/05/2022

Porting, polishing and gas flowing on all cylinder heads, throttle bodies and manifolds

Save the date......
23/05/2022

Save the date......

13/05/2022

Exhaust Manifolds

The exhaust system is responsible for quickly removing hot exhaust gasses from your engine. We are able to modify existing components to assist with this - helping to free up extra engine performance.

Exhaust manifold Porting (gas flowing)

Noticeable power gains are achievable by smoothing the internals (where practically possible) and removing any weld over-spray within the exhaust manifold - particularly manifolds fitted to turbo charged engines. Any overlap to the runners caused by the fixing plate is removed and smoothed. Particular attention is paid to the area around the turbo fixing plate (where appropriate) as this can increase turbo spool-up time and maximum rpm.

Inlet Manifolds porting (Gas flowing)The inlet manifold is responsible for introducing air into the cylinder head from t...
13/05/2022

Inlet Manifolds porting (Gas flowing)

The inlet manifold is responsible for introducing air into the cylinder head from the throttle body, avoiding hot surfaces which can heat the air leading to reduced engine efficiency.

Good gains to low and mid-range power can be made by boring, re-profiling and smoothing, the internals of the inlet manifold – particularly with turbocharged and high-output engines. Engines fitted a badly designed inlet manifold can be improved almost beyond recognition.

Where practically possible, we remove marks left from the casting process from the inlet runners, leaving smooth surfaces with minimal obstruction to the flow of air. Where part of a runner forms a link between the injector boss and the head, the inside is ‘ribbed’, to allow for better fuel/air atomisation and to effectively make the runner an extension of the inlet port.

The throttle body bore is smoothed and bellmouthed to assist with air flow, particularly to runners that would otherwise draw less air flow and consequently run leaner (thus helping balancing the power across the cylinders - similar to how individual throttle bodies operate).

All units are thoroughly cleaned and degreased.

Address

Mabelreign
Harare
0000

Opening Hours

Monday 08:00 - 17:00
Tuesday 08:00 - 17:00
Wednesday 08:00 - 17:00
Thursday 08:00 - 17:00
Friday 08:00 - 17:00
Saturday 09:00 - 14:00

Telephone

+263784728035

Website

Alerts

Be the first to know and let us send you an email when Fuel Flow posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Fuel Flow:

Shortcuts

Share

Category