All Terrain Automotive

05/09/2026

2000 jeep wrangler

Installed a powertrax front locker and new axle seals

05/09/2026

2018 Chevrolet Silverado 2500

Replaced the pitman arm and idler arm with kryptonite steering and added the idler arm brace.

05/09/2026

2015 jeep wrangler came in with the brakes hanging up
Replaced the rear brakes and hoses.

2022 Mitsubishi outlander replaced front struts

04/30/2026

04/30/2026

2020 Promaster 3500 presented with a front-end noise and oil leak, replaced the left front CV axle and oil cooler.

03/26/2026

2008 Ram 3500. Bought this with a noise in the engine and a misfire on cylinder 6. After engine teardown, found delaminating bearings and bent valves. Rebuilt the engine with all new bearings and bored 0.020 over. Fleece Performance Street HD cylinder head, Hamilton cam and push rods, ARP 625 head studs. Fabricated a removable lower radiator support.

03/23/2026

1992 jeep Cherokee came in for a few repairs and upgrades.
Regear to 4.56 Yukon gear
Lock right lockers front and rear
Cav-Fab tie rod and drag link
Extended front brake lines
Moog ball joints
Axle shaft u-joint
Transmission mount
Exhaust repair

03/23/2026

A 2012 GMC came in with an exhaust leak issue caused by a damaged up-pipe, which was replaced with an LB7 up-pipe to eliminate the EGR port and the passenger-side exhaust manifold connection.

01/08/2026

1998 Jeep Grand Cherokee came in with a rusted-out coil mount and a cracked exhaust manifold. We upgraded the coil mount to the Barnes-4WD coil mount, rebuilt the track bar, and swapped out the cracked manifold for an ATP Challenger header.

01/08/2026

Something a little different in the shop. A 1990 Chevrolet C30 came in with a few oil leaks and loose steering. We replaced the worn-out pitman arm and pinion seal and both hub seals.