TCS Mobile Equipment Services

Home
United States
Williamstown, NJ
TCS Mobile Equipment Services

Directions Website

South Jersey's #1 Mobile Equipment Servicing Company. Located in Williamstown, NJ, we service most of the Tri-State area.

11/11/2026

Another machine, another job tackled in the field! This time, our team headed out to get a Doosan GC55C-9 back up and running after discovering worn and damaged flywheel teeth.

Our technician got right to work, safely securing the unit and getting everything positioned for the repair. The real work began with removing the transmission to gain access to the flywheel. Once everything was opened up, we got a good look at the damage and got to work!

🛠️ OUT WITH THE OLD, IN WITH THE NEW!

After removing the damaged flywheel, we thoroughly cleaned the mounting area, making sure all grease, grime, and debris were cleared away before installing the replacement. With the new flywheel seated and secured, it was time to put everything back together.

The transmission was carefully reinstalled, all components were buttoned back up, and it was time for the moment of truth… START IT UP!

After starting the unit and performing operational checks, everything was working as it should! We wrapped up by cleaning the work area and handing the machine back over to the operator, ready to get back to business.

💪 Another successful field repair in the books!

This one came down to normal wear and tear over time, but no matter the issue, we’re ready to get our customers’ equipment back where it belongs — ON THE JOB!

📍 TCS Mobile Equipment Services — Bringing the shop to you!

11/10/2026

🔧 Keeping the Fleet Road-Ready! 🚛💪

Our team recently completed preventative maintenance on a 2025 International MV607 Base, taking care of routine service items to keep this truck running smoothly and ready for the miles ahead!

During the inspection, our technician identified several components showing normal wear and tear and needing attention.

🔩 Here’s What We Took Care Of:

* Replaced worn windshield wiper blades to keep visibility clear.
* Installed a new engine air filter to help maintain proper airflow.
* Replaced the cabin air filter for cleaner airflow inside the cab.
* Inspected the air dryer cartridge and identified it as due for replacement.
* Tested windshield wiper operation after installation to ensure everything was working properly.

With the service completed, this International was ready to get back to work!

Preventative maintenance isn’t just about checking boxes — it’s about catching wear before it turns into unexpected downtime, keeping equipment dependable, and helping your fleet stay productive.

💪 At TCS, we’re committed to keeping your equipment in top shape and your business moving forward!

🔧 TCS Mobile Equipment Services
📞 609-346-7249

11/10/2026

When the brakes go out, getting the machine safely back in service is the top priority!

Our tech got to work on this Toyota 7FGCU to track down the cause of the brake failure. After lifting the unit, removing the wheels, and tearing into the braking components, the inspection revealed seeping wheel cylinders and a master cylinder that was bypassing fluid right out of the top. With the braking system compromised, the lift was immediately tagged out of service until repairs could be completed.

Time to get this machine stopping the way it should! Our tech replaced the master cylinder, both wheel cylinders, and drum seals, along with the necessary brake hardware and components. Once everything was reassembled, the braking system was thoroughly bled, fluid levels were topped off, and the unit was put through testing to verify proper operation.

Another machine brought back to life and safely returned to service! 💪🔧

At TCS, we don’t just find the problem — we get to the bottom of it and get your equipment back to work!

11/09/2026

A new customer called us for a second opinion on this Toyota forklift. Our competitor quoted a transmission replacement, weeks of downtime, and hauling the machine back to their shop.

We confirmed it needed a transmission. We also found that the transmission fluid and filter had never been serviced by the previous provider, despite the manufacturer’s required maintenance intervals. Those intervals exist to help the customer get the longest possible life out of their equipment. Ignoring them gets expensive.

Once approved, we ordered the parts and completed the transmission replacement ONSITE, IN ONE DAY.

We removed the engine and transmission, installed a remanufactured transmission, and replaced the rear main seal, transmission-related seals, and heater hose while everything was apart. Reassembled, refilled the fluids, bled the cooling system, and brought it up to operating temperature. Checked for leaks, verified forward, neutral, and reverse, and completed a test drive.

A major repair doesn’t automatically mean your machine needs to leave your property for weeks. It means you need the right people working on it.

11/07/2026

Our team got a call about a burning smell coming from a 2012 Ram 2500 ST while driving. After inspecting the truck and tracking down the source, our technician found a leaking transmission pan dripping fluid directly onto the exhaust crossover pipe. Definitely not something you want to ignore!

With approval from the customer onsite, our tech got right to work. The truck was brought into a safe work area, the transmission fluid was drained, and the pan was removed. Both transmission filters were replaced, along with a brand-new transmission pan and gasket.

But we didn’t stop there! During the repair, our tech uncovered some previous installation issues, including damaged mating surfaces, bulged pan bolt holes, an incorrectly installed gasket, cross-threaded bolts, and even a miscellaneous tube left inside the transmission pan. Our tech cleaned up the damaged surfaces, corrected the threads, and made sure everything was properly sealed before putting it all back together.

Once reassembled, the transmission was refilled with fresh fluid, properly purged, and topped off to the correct level. We then put the truck through a road test, verified proper shifting, checked fluid levels, and confirmed the leak was gone.

Another repair handled from start to finish! 💪

11/06/2026

🚨🔥 4 PM BREAKDOWN. SAME-NIGHT REPAIR. THAT’S HOW WE DO IT AT TCS! 🔥🚨

A truck going down in the middle of the workday can throw everything off, but we’re not in the business of letting our customers sit around waiting!

Our team received an emergency call for a 2007 Freightliner M2 112 with a major suspension air leak. The truck went down at 4 PM, and our tech headed straight to the customer’s yard to get to work.

The culprit? A severely split passenger-side airbag that was leaking air excessively. What sounded like a straightforward repair quickly turned into a serious challenge!

With a Moffett still mounted on the back of the truck and unable to be removed, access was extremely limited. Our tech had to get creative to work around the additional weight, relieve trapped air pressure, maneuver the suspension, and fight through seized fittings just to get the old airbags out.

But that wasn’t the end of it! After installing the replacement airbags and getting the suspension aired back up, two additional leaks were discovered in the front axle air lines. Rather than call it a night, our tech got right back to work, fabricated new airline sections, and installed them to get everything sealed up.

After a final startup, the suspension was aired up, every connection was checked, and the system was confirmed leak-free.

BACK IN SERVICE SAME NIGHT!

Truck down at 4 PM. Repair completed that same night, right in the customer’s yard!

No waiting until morning. No leaving the customer stranded. Just determination, hands-on troubleshooting, and getting the job done when it matters most!

💪 Tough job? Tight deadline? After-hours emergency? TCS gets it done!

📞 Call TCS Mobile Equipment Services when you need us!

11/06/2026

🚨 DOWN MACHINE? WE’VE GOT IT COVERED! 🚨

Our tech headed out to a customer after their CAT DP40N forklift developed a major transmission fluid leak and lost the ability to move in forward or reverse.

After getting onsite and digging into the issue, our tech discovered a blown transmission cooler hose that was dumping fluid and leaving the machine out of commission.

With the machine down, it was time to get to work! Our tech checked the transmission fluid level, added fluid to help pinpoint the source of the leak, and quickly tracked the problem down to the transmission cooler lines. The damaged hose was removed, a new section of hose was cut from our on-hand supply, and new hose clamps were installed to get everything sealed back up.

After the repair, the transmission was topped off to the proper level, the machine was fired back up, and everything was put to the test. No leaks, proper operation, and forward and reverse back in action!

Another CAT back up and running, another customer back to work, and another job handled with the parts and know-how to keep downtime to a minimum! 💪🔧

When equipment goes down, TCS gets moving!

11/05/2026

When it comes to keeping trucks on the road, we don’t believe in cutting corners! Our tech headed out to tackle a long list of needed repairs and maintenance on this 2021 International HV607, and we didn’t leave much untouched!

From the rear end to the front suspension, this truck was ready for some serious attention. We got right to work replacing damaged and dislodged wood support beams, securing everything with new U-bolts, and giving the tandem brakes some much-needed TLC with brand-new pads and rotors.

But we weren’t stopping there! Our tech also replaced cracked and deteriorating air bags, leaking front shocks, a dirty engine air filter, and a dirty cabin air filter. To top it all off, we installed a new air dryer cartridge and purged the air system to clear out unwanted debris and moisture.

ONE TRUCK. A WHOLE LOT OF WORK. ZERO CORNERS CUT. 💪

✔️ New wood support beams & U-bolts
✔️ New tandem brake pads & rotors
✔️ New air bags
✔️ New front shocks
✔️ New engine & cabin air filters
✔️ New air dryer cartridge
✔️ Air system purged and serviced

Another big job knocked out, another customer taken care of, and another truck getting ready to get back to business!

11/05/2026

The customer called in reporting a gear oil leak on their Crown PE4500. Our tech headed out, located the unit, and safely positioned it to inspect the lower drive unit and pinpoint the source of the leak.

The inspection revealed failed axle shaft seals, along with original RTV sealant on the side cover and top gasket. With the unit operating in cold-storage conditions and a history of leaks, the customer requested an upgrade to cork gaskets for a more reliable seal.

Our tech got to work:
• Removed the drive tire and lower gearbox assembly.
• Completely disassembled and cleaned the gearbox.
• Replaced both axle shaft seals.
• Cleaned all mating surfaces and installed new cork gaskets.
• Discovered a missing dowel pin between the upper and lower housings and installed a replacement.
• Installed the correct spacers between the housings.
• Reassembled everything and torqued components to specification.
• Refilled the drive unit with gear oil and reinstalled the wheel and axle assembly.

Once everything was back together, the unit was run and thoroughly checked for leaks. No leaks were present at the time of testing, and the Crown PE4500 was ready to get back to work!

Another job completed and another machine back in service! 💪

TCS Mobile Equipment Services — Keeping Your Equipment Moving!

11/04/2026

Our crew took on a fork positioner upgrade for a Toyota 7FGCU30, and this one definitely required some outside-the-box thinking!

Our technician arrived onsite, removed the original sideshift carriage, and prepared the machine for its new fork positioner. But there was a catch… although the machine was equipped with a 4th function, it was missing most of the pulleys, brackets, and hoses needed to make everything work.

With multiple components discontinued or backordered through Toyota, waiting around wasn’t the solution. Instead, our technician sourced usable components from another machine and got right back to work!

The installation called for more than just bolting on parts. Overmast pulleys, brackets, and hoses were installed, custom hoses were measured and made, and additional brackets were fabricated and modified to ensure proper hose routing and securement.

Once everything was fitted, secured, and installed, the forks went on and the entire system was tested to confirm proper operation.

When parts are hard to find, we find another way! A little fabrication, some resourcefulness, and a whole lot of know-how got this Toyota the upgrade it needed. 🔧🔥

At TCS, we don’t just replace parts — we find solutions and get equipment back to work! 💪

Address

2599 South Black Horse Pike
Williamstown, NJ
08094

Website

http://www.tcsmes.com/

Alerts

Be the first to know and let us send you an email when TCS Mobile Equipment Services posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.