Revive Engine Works

Revive Engine Works Dirt Bikes, Street Bikes, ATVs, SxSs & more!

Revive Engine Works is your trusted motorcycle and powersports engine building and machine shop, conveniently located in Newfoundland (West Milford), New Jersey.

03/14/2026

This is a common problem on 2015ish to 2023 KTM 250/350 engines. The idler gear for the oil pump warps from the heat then doesn't engage properly and starves the engine for oil. Cheap parts leads to expensive repairs.

03/01/2026

Boring a ESR big bore cylinder +0.50mm for the next size piston on our Kwikway FWS-II boring bar.

02/21/2026

Yamaha Raptor 350 head ready to go back to the customer. Cleaned up, valve seats cut and head gasket surface milled

02/15/2026

This ATC head started off nasty. This before was after it came out of the ultrasonic cleaner, so it was even worse to start with. After some time in the v***r blaster it comes out looking like new again. After all the machine work is done, it will look even better and function like new!

01/29/2026

Yamaha Grizzly 125 cylinder head brought back to life! I just refreshed my v***r honing machine and bit does that aluminum finish look amazing!

01/21/2026

Welding a nut to what is left of a broken bolt from m this Yamaha Warrior cylinder in an attempt to get it out easily

This head took on some damage and needed new valve seats. This customer decided to upgrade the seats to
01/18/2026

This head took on some damage and needed new valve seats. This customer decided to upgrade the seats to

01/16/2026

This Subaru Impreza head got damaged in an accident. We welded it up and machined it back. This isn't the final machining process on this. I forgot to document the finished product.

01/15/2026

Degreeing in the camshafts in this Kawasaki GS1100 street strip build. Custom welded and ground cams from Web and adjustable sprockets from APE

Repairing a power valve bore on a YZ250. The material where the shaft goes through is way too thin. No wonder it wears...
01/14/2026

Repairing a power valve bore on a YZ250. The material where the shaft goes through is way too thin. No wonder it wears out!

Address

11 Hilltop Road
West Milford, NJ
07435

Website

Alerts

Be the first to know and let us send you an email when Revive Engine Works posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category