Hurts Auto Solutions

Hurts Auto Solutions Full Service Light & Medium Duty Auto Repair • Auto Key Cutting & Programming
Serving Linn & Benton County, Iowa
(1)

Thank you Tharp Design. The new shop truck looks perfect.
05/28/2026

Thank you Tharp Design. The new shop truck looks perfect.

Shoutout to one of our repeat customers for bringing their 2012 Chevy Cruze back to Hurts Auto Solutions. We handled a k...
05/24/2026

Shoutout to one of our repeat customers for bringing their 2012 Chevy Cruze back to Hurts Auto Solutions. We handled a key programming job for them about a year ago, and this week they brought it in to get the AC sorted out.
The system was losing refrigerant, but standard UV leak dye didn't show a single trace of a leak anywhere.

Instead of guessing, we used our electronic refrigerant leak detector to sniff out the system. We were able to pinpoint the exact failure point on a hard AC line that the dye completely missed.
We got the line replaced, recharged the system, and it's blowing cold again.
If your vehicle's AC isn't holding a charge and standard dye tests aren't finding the issue, give us a call. We have the diagnostic tools to find the leaks that standard methods miss.

📞 Call or text to schedule an appointment.

05/21/2026
05/21/2026

At Hurts Auto Solutions we are dedicated to quality service! We offer light and medium duty auto diagnosis and repairs. We also are able to do automotive key cutting and programming.

A little bit of everything at the shop today!First up, a 2007 Roush Stage 3 Mustang came in with a dead battery. Diagnos...
05/19/2026

A little bit of everything at the shop today!
First up, a 2007 Roush Stage 3 Mustang came in with a dead battery. Diagnostic verdict? A sneaky 200 mA parasitic draw living right in the horn circuit.

Next door, this 1978 Chevy Corvette is getting some serious upgrades. It’s packing a 383 stroker under the hood, so we're installing a new transmission paired with a custom-spec'd torque converter. When you run a massive lift cam, getting the right stall matters for both streetability and putting that power to the ground!
Need your daily driver diagnosed or your weekend toy upgraded? Give us a shout

05/15/2026

Don’t make the same mistakes as this customer did. Some may not know this but the aftermarket sells replacement lug nuts made for OEM style wheels and for aftermarket style wheels. The difference is in the seat area of the lug nut made for aftermarket wheels which is much smaller on the left compared to the broad seat area of the OEM style wheels on the right. These two styles are not compatible and should not be used as this affects the clamp load on the wheel and of course lug nut retention. Ford Motor Company

We’re working on a 2015 Chevy Tahoe today that was pulling hard to the right. The issue? The left front brake caliper sl...
05/12/2026

We’re working on a 2015 Chevy Tahoe today that was pulling hard to the right. The issue? The left front brake caliper slides were stuck, causing the pads to wear unevenly and lose stopping power.
Along with a full brake overhaul, we’re getting their Air Conditioning back in tip-top shape and performing a full vehicle health check.

Is your vehicle acting up? Give us a call today!

We’re wrapping up a big one today on this 2016 Ta**us SHO. This car had the classic "knock" that often gets mistaken for...
05/06/2026

We’re wrapping up a big one today on this 2016 Ta**us SHO. This car had the classic "knock" that often gets mistaken for terminal engine failure.
On these engines, the timing chain tensioner can lose its prime once the car gets up to temp and under load. If left alone, that slack allows the chain to stretch and wear through the guides.
We got this one sorted properly with high-quality OEM components. While the front of the engine was open, we also knocked out the cam phasers and the water pump to ensure this SHO stays reliable for the long haul.

If you’re looking for honest, high-quality automotive work without the dealership headache, We’re currently booking for ...
05/04/2026

If you’re looking for honest, high-quality automotive work without the dealership headache, We’re currently booking for the upcoming week.

From complex diagnostics and engine work to specialized locksmith services like "all-keys-lost" scenarios and high-performance upgrades, we’ve got the tools and the experience to get you back on the road.

Lost a key? Need a spare? We’ve got you covered!Hurts Auto Solutions is now offeringBUY ONE automotive key, GET ONE 50% ...
01/18/2026

Lost a key? Need a spare? We’ve got you covered!
Hurts Auto Solutions is now offering
BUY ONE automotive key, GET ONE 50% OFF!
Don’t wait until you’re stuck—get that extra key now and save.
Send us a message to get started.
Offer valid for the same vehicle only.

Address

2293 58th Street
Vinton, IA
52349

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+13192021427

Alerts

Be the first to know and let us send you an email when Hurts Auto Solutions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Hurts Auto Solutions:

Share