Rip Ride Restore

Rip Ride Restore We get you back to Rippin', just Riding casual or bring it back to life with a complete Restoration.

We have also been pedding. Cy290 with ada s1 pipe on the Bigfoot.Lh/Rc hybrid 26cc with sikk pipe on the xped. Got a chr...
11/17/2025

We have also been pedding.

Cy290 with ada s1 pipe on the Bigfoot.
Lh/Rc hybrid 26cc with sikk pipe on the xped.

Got a chrome frame and building it up with rc260 with an ada stalker can exhaust. Should have the pole ready this week.

We have a nice banshee in the shop this week for a refresh and clean up. Pulled carbs for a MUCH needed cleaning. We ahe...
11/17/2025

We have a nice banshee in the shop this week for a refresh and clean up.

Pulled carbs for a MUCH needed cleaning. We ahead and synced them while we were there. She has good compression and revs really crisp.

Need to button up a few loose ends and it’ll be ready for whatever they want to do next! It’s a project!

If you go riding in the sand, be sure to clean up after. It’s hard on parts. Also, a lot of folks always remember brake ...
04/29/2024

If you go riding in the sand, be sure to clean up after. It’s hard on parts.

Also, a lot of folks always remember brake pads on their cars but don’t forget your power sports have them too!

Some may go its entire life on its original pads, it just depends on how you ride.

Needless to say, this 04 TRX450R is living longer than the pads!

1984 Suzuki LT50. Bringing it back to life, spent a few hours trying to get the carb to stop leaking from the overflow, ...
12/18/2023

1984 Suzuki LT50.

Bringing it back to life, spent a few hours trying to get the carb to stop leaking from the overflow, come to find out you CAN still buy a NEW one straight from Suzuki!

It runs well other than the dang fuel leak! After that is done we will be steam cleaning the frame and it should be ready for it’s new home.

Didn’t have much extra time this week, but we got the motor in today and it looks awesome.
12/15/2023

Didn’t have much extra time this week, but we got the motor in today and it looks awesome.

Getting closer and closer! +8 swing arm and all new hardware/bearings and axle. New hubs will be here this week. Going t...
12/11/2023

Getting closer and closer!

+8 swing arm and all new hardware/bearings and axle. New hubs will be here this week.

Going to detail the engine and get it in and start with the wiring.

Mothers has never done me wrong, what do you use?
12/07/2023

Mothers has never done me wrong, what do you use?

Slow work but progress was made. I went ahead and polished the steering stem and cleaned up the calipers and tie rods. C...
12/06/2023

Slow work but progress was made.

I went ahead and polished the steering stem and cleaned up the calipers and tie rods.

Came out pretty good!

It’s fun trying to figure out what you’re missing with a table full of hardware!

IYKYK, found this gem of a battery cover.
12/06/2023

IYKYK, found this gem of a battery cover.

2004 TRX450r Houser steering stem and Flexx bar install.Needed this since our 2005 TRX450r stem broke!
12/06/2023

2004 TRX450r Houser steering stem and Flexx bar install.

Needed this since our 2005 TRX450r stem broke!

2003 Raptor 660720cc StrokerPorted HeadStage 3 Hot Rods CamBarkers Drag PipesExtended Swing arm w/ Billet CarrierIt was ...
12/06/2023

2003 Raptor 660

720cc Stroker
Ported Head
Stage 3 Hot Rods Cam
Barkers Drag Pipes
Extended Swing arm w/ Billet Carrier

It was a being built to be a drag quad in 08/09 and it never got put back together after the frame was powder coated. A lot of new parts in boxes, like a cold fusion nitrous kit, an old school direct drive clutch cover and lock up clutch and a full set of ebc brake pads.

Puzzle Time!

12/06/2023

It’s been a long while since we have made a post, but we have a few new things to share.

Address

Valley View, TX

Website

Alerts

Be the first to know and let us send you an email when Rip Ride Restore posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Rip Ride Restore:

Share