Norton Truck Repair, Inc.

Norton Truck Repair, Inc. With over 15 years of experience, you have no worries with Norton Truck Repair.

New set of landing legs to replace the rotted out ones on this tank trailer. Getting it ready for busy season!
09/11/2026

New set of landing legs to replace the rotted out ones on this tank trailer. Getting it ready for busy season!

Broken brake can and worn out belt tensioner changed on this mack granite today. Sometimes necessity is the mother of in...
09/06/2026

Broken brake can and worn out belt tensioner changed on this mack granite today. Sometimes necessity is the mother of invention, cut off a piece of old Allen wrench and used a ratcheting wrench to remove the pulley bolt in the tight area. Worked like a charm! Also made an electrical repair to make tag axle function again. Allset for work on Tuesday!

09/02/2026

🚨NOW HIRING🚨 if you have any interest or more questions, please contact us at 508-529-2159 or come see us at 12 Walker Drive, Upton, MA.

Replaced the brakes on both drive axles of this Mack granite septic truck this afternoon. Ready to work again tomorrow!
08/28/2026

Replaced the brakes on both drive axles of this Mack granite septic truck this afternoon. Ready to work again tomorrow!

Red one day yellow the next!
08/22/2026

Red one day yellow the next!

This 4 cylinder Cummins was sent to us locked up, we dropped the pan and found it full of metal! Multiple main bearings ...
08/20/2026

This 4 cylinder Cummins was sent to us locked up, we dropped the pan and found it full of metal! Multiple main bearings and one rod bearing had spun. Stripped the entire engine and sent it to the machine shop, unfortunately for the customer the block was too far gone for repair. New block was sourced and crank ground down for reuse. All reassembled and delivered back to customer!

Cat c7 in a F650 with a leaking head gasket. Once the head was removed it was found to be more cost effective to replace...
08/19/2026

Cat c7 in a F650 with a leaking head gasket. Once the head was removed it was found to be more cost effective to replace it with a reman head. Also dropped the pan and rolled some bearings in for preventative maintenance. All back together with some other little issues repaired at same time!

08/12/2026

🚛 Attention, trucking professionals! 🚛
Are you ready to tackle your heavy highway vehicle use tax obligations? Form 2290 is your go-to resource for reporting and paying any tax due on highway motor vehicles with a taxable gross weight of 55,000 pounds or more.

🔍 What you need to know:
Use Form 2290 to calculate and pay your tax.
Claim suspension if your vehicle is expected to be used 5,000 miles or less (7,500 for agricultural vehicles).
Report any changes in vehicle weight or usage.

For detailed instructions and to access the form, visit our official page: https://ow.ly/8a5S50Zy4fL

Flat tire off the bead on a bobcat this morning, used the old ratchet strap trick to get it inflated! Pulled the screw a...
08/12/2026

Flat tire off the bead on a bobcat this morning, used the old ratchet strap trick to get it inflated! Pulled the screw and plugged the hole.

Another day and another broken bolt drilled/extracted. This was on a rear Peterbilt axle for the torque rod mount bolt. ...
08/10/2026

Another day and another broken bolt drilled/extracted. This was on a rear Peterbilt axle for the torque rod mount bolt. No damage to threads and new bolt went right in!

Address

100 Orchard Street
Upton, MA
01568

Telephone

+15086573400

Website

Alerts

Be the first to know and let us send you an email when Norton Truck Repair, Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Norton Truck Repair, Inc.:

Shortcuts

Share

Category