Altered Components

  • Home
  • Altered Components
Call Directions Contact the business

Altered Components Altered Components is a locally owned and operated custom automotive shop, specializing in VW/Audi a

Here’s the scoop from the rsq8. Our customer reached out about a slew of upgrades he had planned. Upgraded turbos, exhau...
03/11/2026

Here’s the scoop from the rsq8. Our customer reached out about a slew of upgrades he had planned. Upgraded turbos, exhaust manifolds, charge piping, map sensors, intercoolers, high pressure fuel system, low pressure fuel system, light weight crank pulley, spark plugs, and exhaust tips. We had planned to have it done and ready end of September but delays had other plans. Due to shipping delays we couldn’t get it in until mid-October; the problem was that the car needed to be ready by Sema including transport. We got finished up Friday the 23rd, most of the logging done to verify everything was working properly and delivered the car late Friday evening. Transport then ran into issues and couldn’t make the pickup. So after all that work the customer decided to load up and drive his roughly 1000hp rsq8 from northern VA 2,400 miles to Las Vegas. If you’re attending Sema stop by the Power Division booth and take a peek at the product range, as this a pretty decent testament to bolt all this up, drive it that far and still get about 25mpgs with no issues.

We were incredibly busy this past week. We have some calls and messages to follow up on but we got through a pretty heft...
24/10/2026

We were incredibly busy this past week. We have some calls and messages to follow up on but we got through a pretty hefty list of work.

One we got wrapped up last week. Another business owner in our complex was looking to get some proper air management for...
20/10/2026

One we got wrapped up last week. Another business owner in our complex was looking to get some proper air management for his R10. He got a ChadCrissDesign manifold, Dakota Digital gauge, Universal Air Suspension Co. modular tank, and VIAIR | 12V and 24V Air Compressors dual compressors and left the rest up to us. Came up with an exposed setup that looked clean in the bed. Made a mount for the Dakota digital air gauge above the radio in the cubby. Fun project and install. Photos by D A N I E L | V I R G I N I A .

As some of you know Michael Brill was presented with a job opportunity that he’s been waiting to clear. This week is his...
09/10/2026

As some of you know Michael Brill was presented with a job opportunity that he’s been waiting to clear. This week is his first week at his new job, so everyone wish him luck and growth on his new venture. However that also means it’s back to a one man show here, send help 🫠. If a message, call, or text goes unanswered don’t feel bad being the squeaky wheel. Will be posting about this some point next week.

Been a minute since we’ve posted anything, not that we haven’t had anything worth posting just been busy and not a prior...
07/10/2026

Been a minute since we’ve posted anything, not that we haven’t had anything worth posting just been busy and not a priority for us. However here is Tony Mairena sitting proper on his new set of Rotiform wheels we got mounted up for him. Also some pics of the updated trunk we did for him just before loe show with laser work done by Wieder on the acrylic so you can see the seamless_tanks fitted underneath.

It’s been a long time coming but finally got the tire machine and balancer we wanted.  Need tires mounted and balanced? ...
06/07/2026

It’s been a long time coming but finally got the tire machine and balancer we wanted. Need tires mounted and balanced? We got you! Have a vibration that you can’t seem to pinpoint and think it’s a tire issue? The Roadforce balancer can help pinpoint the vibration and possibly help with match mount to reduce weight needed to balance a tire and reduce vibrations or just let us know if a tire is beyond help.

Hope everyone has a happy and safe 250th 4th of July celebration! We will be back in the office Monday.
04/07/2026

Hope everyone has a happy and safe 250th 4th of July celebration! We will be back in the office Monday.

We ordered the Unitronic tcu unlock tools the moment they dropped and wasted no time, the moment they were in our hands ...
25/06/2026

We ordered the Unitronic tcu unlock tools the moment they dropped and wasted no time, the moment they were in our hands we had a customer at the door 8 minutes later to get the flash, then another an hour later. If you’re in NOVA and need your DQ381.2 or ALX52 transmission unlocked and tuned we are ready to go, the summer sale is also active until July 10th.

This one was a fun one…… Okay, not really. This R8 was brought to us to install a  roof scoop intake. At first we though...
19/05/2026

This one was a fun one…… Okay, not really. This R8 was brought to us to install a roof scoop intake. At first we thought oh this will be cool, but then after unboxing we realized there were no instructions. Hop on their site find an email and shoot them a message asking if there was some instructions that they could provide, few minutes later email back saying the address doesn’t exist. Okay, found another point of contact and received the response of “thank you for your message. Unfortunately, we don’t have any instructions for this. What exactly are the issues?”. This was the point I realized this was going to be a headache. Overall reality is it is “somewhat” self explanatory for the most part but for the cost of this part we were extremely disappointed in the lack of instructions and the overall way the part was shipped and the parts included. We spent hours searching through catalogs, contacting our wholesale partners, and contacting filter makers to find intake filters that would fit inside the box and on the fl**ge of the provided MAF housing. We had to order extension harnesses for the MAF sensors since they were placed about 8” higher in the engine bay. We had to order a bunch of hardware to even complete the install. They had shipped it with a single 13-15” piece of bright blue silicone that looked like it was just chopped with a dull machete, not cut straight and not cut clean at all. We finally got in touch with a reseller and got answers on “approximately” how the mounts for the gas struts were to be installed and what they recommended for a filter. Turns out despite them making the fl**ge 5x6.75” they just used a 6” cone filter and shoved it on and tightened it down. Mind you they designed and made this part and chose a fl**ge size that is oddly difficult to find. We ended up finding an filter the had a 6” fl**ge and the “top” of the filter was elliptical and used that one. We also made some stainless heat shields to cover up the hole left by removing the air boxes to keep the heat from rising and heating up the intake air and the hoses/wiring in that area.

Took from Wednesday to Sunday off this year for Alpine. Left Wednesday morning at about 3:30am and hit the road. Detoure...
18/05/2026

Took from Wednesday to Sunday off this year for Alpine. Left Wednesday morning at about 3:30am and hit the road. Detoured over to pigeon forge to stop at Buc-ee’s and finally took a road I’ve wanted to drive for about a decade now. I took my 337000 mile tdi on bags on Tail of the Dragon, it was everything I hoped for and I will for sure be back at some point. Got into Helen at about 3pm and the events were already rolling. Such a great turnout of top notch and unique builds. There was an 07K turbo Awd 20th, and Awd vrt mk2 that was really well done, a manual swapped D2 S8 on some bbs, the tri charged b7 rs4 got some more tweaks and more functional, saw the resurrection of the brown car after many years in hiding, just an overall good time at a chill event. I took some pics of some of my favorites but overall the hangs and chats with people I don’t see that often are what it’s all about.

Address

VA

Opening Hours

Monday 10:00 - 18:00
Tuesday 10:00 - 18:00
Wednesday 10:00 - 18:00
Thursday 10:00 - 18:00
Friday 10:00 - 18:00
Saturday 10:00 - 18:00

Telephone

+15407291500

Website

Alerts

Be the first to know and let us send you an email when Altered Components posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Altered Components:

Shortcuts

  • Want your business to be the top-listed autos & automotive service?

Share