JCR Chassisworks

  • Home
  • JCR Chassisworks
Directions Website

JCR Chassisworks JCR Chassisworks is a full service drag-race chassis shop specializing in one-off custom built race cars that perform as well as they look.

From the first piece of tubing off the rack to the paint, we do it all. Let us build your dream!

Built the injector and coil harnesses for the 65 fastback build last week.   Also have alot of the other wiring on the f...
26/09/2026

Built the injector and coil harnesses for the 65 fastback build last week. Also have alot of the other wiring on the front half of the chassis/frt end mocked up and tested ready for the DR25 shrink tube and mil spec connector. Built in house from materials sourced from various suppliers.

Fabbed up a bracket for the Billet Specialties billet license plate frame w LED light, since the OEM tag area had to be ...
07/08/2026

Fabbed up a bracket for the Billet Specialties billet license plate frame w LED light, since the OEM tag area had to be cut out for wheelie bar clearance. Because street cars need a license plate. 😁
2 pics in post….

01/08/2026

All in the details. Every build gets loaded with custom mounts and brackets. Because off the shelf pieces aren’t good enough.

Fabbed up a set of ‘moly lower control arms with high misalignment spherical bearings to work with long travel suspensio...
22/07/2026

Fabbed up a set of ‘moly lower control arms with high misalignment spherical bearings to work with long travel suspension coupled with adjustable ride height upper mnts. The hardened hex stock in the pic will be machined into 2 new extended lower bearing mount pins for AFCO struts to go along with the longer bearings since the factory AFCO pins are now too short.
Build things the way they should be and then build/machine the parts to make it all work the way it ought.

For those who don’t know, Santhuff manufactures one of the best spherical bearing adjustable upper strut mounts availabl...
09/07/2026

For those who don’t know, Santhuff manufactures one of the best spherical bearing adjustable upper strut mounts available, and has for a LONG time. They fit the popular struts and plenty of room for longer travel struts. We have installed them on several builds and have had zero issues with them. They come with everything needed including the adjustment tools shown. They usually stock them and usually have the tap to repair the threads in the cup if you damage them. We always chase the threads after welding for smooth operation, and you should too. They are currently $675.00 , available directly from Santhuff- give them a call to order.

Looking to set up a chassis/cage cert here at the shop May 30.  Depending  on number of cars, around 250 each.   We are ...
19/05/2026

Looking to set up a chassis/cage cert here at the shop May 30. Depending on number of cars, around 250 each. We are located in Central Florida , Weirsdale 32195 and have room to park/turn around big trailers/stackers etc. Let me know if you are interested so we can schedule. Thx.

The fiberglass bodied 65 fastback drag n drive build got the final blocking and epoxy primer, and alittle final mock up ...
30/04/2026

The fiberglass bodied 65 fastback drag n drive build got the final blocking and epoxy primer, and alittle final mock up assembly on the frt end. Soon we will get the body off the chassis and get it put to powder coat, then put the body back on and paint. Lots more pics scattered about this fb page Sooo close!

Black epoxy primer as a final primer coat on the main body shell on the composite bodied 65 mustang drag n drive build.
15/04/2026

Black epoxy primer as a final primer coat on the main body shell on the composite bodied 65 mustang drag n drive build.

11/04/2026

The 65 mustang composite bodied drag n drive build we are building here at JCR got the bodywork reprimed and blocked for the second time and wet down with wax and grease remover to check out the progress . One more prime and light blocking and then epoxy primer as a final coat to cure then be scuffed for paint. Closer all the time.

21/03/2026

Got the 65 fastback mustang composite bodied, tube chassis, drag n drive build polyester primed for the second time. One more block and prime, then light block and epoxy prime as a pre-sealer for paint. Yes, the shop is a mess lol. Every panel on this fiberglass body is filler from end to end, and every line/radius built. Lots of dust 😁

Address


Opening Hours

Monday 08:00 - 17:00
Tuesday 08:00 - 17:00
Wednesday 08:00 - 17:00
Thursday 08:00 - 17:00
Friday 08:00 - 17:00

Alerts

Be the first to know and let us send you an email when JCR Chassisworks posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

  • Want your business to be the top-listed autos & automotive service?

Share