Houston BMW Coding

29/08/2026

29/08/2026

Now offering Post-06/2020 BMW & Toyota Supra MG1 DME Unlocks!

No FEMTO shipping overseas — unlock performed right here in Houston Texas.

• BMW & Toyota Supra
• Post 06/2020 Bosch MG1 ECUs
• MHD+ / bootmod3 / MG Flasher / EcuTek compatible
• Local drop-off available
• Same-day turnaround available

Ready to tune your locked DME? Send us a DM with your year, make, model, and DME information.

29/07/2026

THIS WORKS ON YEAR
2019+ MODELS ONLY!!!!!

05/11/2022

Are you looking for a "Coding Wizard" to wave their magic wand and fix your BMW? We highly recommend Eric with Houston BMW Coding for his vast knowledge and professionalism. Always going above and beyond for his customers to ensure the job is done right.

Eric has overseen coding needs for 6HP28 conversions since our original prototype in Jan 2021 and has never let us down. On top of that he has worked directly with us during R&D processes that require trial/error with open communication and brainstorming. Its not easy finding someone so dedicated and willing to take on a challenge. If you're looking for a coder you can count on contact Houston BMW Coding today... you will not be disappointed!

+1 832-266-0137
https://www.facebook.com/HoustonBimmerCoding

02/11/2022

Now Offering…
NBT EVO ID4 to ID5/ID6 Software Upgrade!

ID4 to ID6 Upgrade - $300
(Fullscreen CarPlay, Video in motion, Bmw Apps, and Navigation Activation Included)
Note: WiFI Antenna necessary for CarPlay. Oem recommended is around $30 online.

WIFi Antenna Install - $50

02/11/2022

This 2016 F30 came in to get a software upgrade for its idrive. The boring NBT EVO ID4 was upgraded by software to the newer NBT EVO ID5/6 layout. It was also coded with Full Screen CarPlay and Video in Motion. The ID4 did not have that capability. Customer was extremely happy. Thanks for your business!

08/06/2022

This E46 325i had a primary issue of cranking but not running. After a diagnostic it was confirmed that the DME needed to be replaced because of a well known fault code (Checksum ram fault internal failure). The key fob also needed to be replaced as well because it was damaged and missing the transponder/board. After programming the dme and key, the bmw started but ran rough with very little throttle response. After further diagnosis it was found that the coolant temp sensor and cylinder 3-4 fuel injectors were unplugged. Not only that the disa valve was found to be faulty as well because it had no rigidness whatsoever. Now the car runs great! Thanks for your business.

04/06/2022

This E71 X6M had issues with ignition staying on and sometimes would not engage the starter along with some other electrical issues. After diagnosis it was confirmed that the CAS module needed to be replaced. The replacement CAS module was programmed to the X6M and issue was resolved. Thanks for your business!

22/04/2022

2017+ Bmws with idrive version ID5/ID6

Apple CarPlay Activation + Full Screen -$200

Full screen based on software version.
(iLevel/iStep must be >= 18.03)
If needed, software can be updated for additional cost.

15/12/2021

Dme’s in stock for MSD80 to MSD81 upgrade. MSD80 dme’s have issues where the mosfets blow causing constant misfire on bank 1 And/Or 2. The best repair is to upgrade to a MSD81 dme so this issue does not happen again.
Send us a message if you need this service.