Battlestar Galactica: Blackstar Squadron

  • Home
  • Battlestar Galactica: Blackstar Squadron
Directions Website Contact the business

Battlestar Galactica: Blackstar Squadron Blackstar Squadron is a world wide classic Battlestar Galactica costuming club.

Gear up and join the fight against Cylon Tyranny! Greetings Warriors!

Fleet Comm Line Alpha:

This page is run by the current Blackstar Squadron council. Check in often for squad news!

You have been assigned to Blackstar Squadron aboard the Battlestar Galactica. Nicknamed "The Fighting Faithful", this squadron represents the elite, the very spirit of what it is to be a Colonial Warrior. If you’ve found your way here we don’t need to tell you about the thrill of piloting a Viper or donning the uniform... you know it all too well. By joining these ranks you will meet others with the same vision and together we will all do what we can to bring a little hope to a world that has known its fair share of adversity.

So strap on your boots, grab your laser and stand tall like the warrior you are. Let the word go forth... there are those who still believe.

10/10/2024

If you don't have a printer of your own, but wanted to get some 3d printed props my buddy Kevin Christley is ready and waiting for you

Hes very affordable and very good. With both filament and resin printers.

I have a bunch of files, lasers, a home made Colonial Carbine, recharge cylinders, languatron, Computron (Galactica 1980), laser Derringer (Galactica 1980) Cylon R***e, Cylon Pistol, Cylon Sword, Viper Control stick, Viper helmet (either emblem) NuBSG cubits, haven't found new ones, and a few others.

You can contact Kevin directly or myself Ed O'Connell and we'll get you in touch. Just tell him Ed sent you.

Ok, more work on my son's Colonial  gunbelt.  I'm using an old Tactical trouser belt for him. I had to cut it down A LOT...
23/06/2024

Ok, more work on my son's Colonial gunbelt. I'm using an old Tactical trouser belt for him. I had to cut it down A LOT since he takes after his mom waist wise.

I used a bit of nylon webbing I picked up to use for a sling that I never used (still have a lot left) To make a belt loop. I newest it onto the thin EVA foam. Leaving just enough to fit the belt.

I also made a keeper to put the extra length of belt neat.

Next is to make a leg strap so it stays attached to his leg. I may have something I could use already, would just have to shorten it.

Also not sure how I'll attach the leg strap to the holster. I may also add a retaining strap to go over the pistol grip.

I also have 3 3d printed recharge cylinders to attach to the belt as well.

Carbine is done. I just haven't attached the scope. Here it is next to my Resin laser pistol. I'm happy with how it came...
02/06/2024

Carbine is done. I just haven't attached the scope.

Here it is next to my Resin laser pistol.

I'm happy with how it came out, and know where I'd change things if I ever do another one. (I'd sell this one and restart)

Nice size, over all, exactly like I planned it when I designed it. I did not add weight to it so it's light, especially compared to the resin pistol.

If I do it again, I'd work on the emitter end a bit more. Probably use a different emitter end and cut both the front and back off the second emitter so it can match up the emitter detailing.

I may still use magnets to attach the scope, that's why I haven't glued it on.

The only thing left is to add sling mounting points and make the sling.

Ill paint up the recharge Cylinders. And call this project done.

Ok, more Carbine work. One think that has always bothered me about this printfiles is tge lack of any detailing between ...
29/05/2024

Ok, more Carbine work.

One think that has always bothered me about this printfiles is tge lack of any detailing between tge buttstock end and the rear of the reciever.

So, I had a friend "remove" the rear details from a different laser file. I then had them printed and then glued the 2 halves together.

Now, in order to allow for the stock rods, I turned the piece upside down and notched the new button

I will glue it in place, and use filler to even out the rough cuts I did.

The file detailing is not needed, since tge stock will close up yo this piece. But it'll look better then just a plain flat surface.

I also finished the scope. All black looked boring, so I added some gunmetal detailing to it.

Once this is done, I'll be time to paint the carbine. I may still apply plastidip to tge very end of the butstock for a runner like feel.

Ok, BSG Carbine update. I've completed the basic construction.  I now have to do some seam filling, and im gonna do more...
09/05/2024

Ok, BSG Carbine update.

I've completed the basic construction. I now have to do some seam filling, and im gonna do more shaping on the pistol grip.

First picture is shown with my Stargate M4. I'm not a fan of the P90 so I cut up 2 cheap spring arisofts. The carbine stock is shorter. Buy overall longer than the M4. I like how it came out.

I am second guessing the way I installed the front grip. I'd reverse it if I had to do it again.

Final picture is compared to 2 of my hand lasers. This is exactly what I wanted when I designed it. Later today I may try holstering the carbine in my Warriors gunbbelt.

It is with a heavy heart that we must announce the passing of our fellow Warrior Joseph Vogt. Let us remember him for th...
20/04/2024

It is with a heavy heart that we must announce the passing of our fellow Warrior Joseph Vogt. Let us remember him for the passion he brought to all of his endeavors and his unwavering service to this squadron.

See you on the other side Captain. Just don't wait up. ;)

We now return this warrior to the cradle of space.

31/12/2023

I Hope Everyone Has a Wonderful Happy New Year

Merry Christmas to everyone i wanted to share with everyone a few days ago i got a Big package  from a Secret Santa from...
25/12/2023

Merry Christmas to everyone i wanted to share with everyone a few days ago i got a Big package from a Secret Santa from a member of therpf website and today i opened the gift and here is what was inside the gift a large size model from Battlestar Galactica and also coming next year i hoe to release a new prop from Battlestar Galactca the new prop is my version of a prop that has not been seen in a very long time and i had help from a company called 3dspot who helped create the stl file fro a photo that i sent them

Address


Alerts

Be the first to know and let us send you an email when Battlestar Galactica: Blackstar Squadron posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Battlestar Galactica: Blackstar Squadron:

Shortcuts

  • Want your business to be the top-listed autos & automotive service?

Share