Thermoworks Solutions

Thermoworks Solutions Thermoworks is your permanent heat management solution, Welding and Fabrication shop to any and all of your needs!

08/29/2026

As summertime is coming to an end i’m looking to fill in my schedule have a bunch of slots open and wanting to stay busy and take on new projects anything stainless, aluminum, titanium if its metal i can do it. Also have my Inconel wrapping service available, let’s get your car functioning the best it can! Check out my page to see examples of my past work and reach out and get on the schedule today!

Had the Pleasure of modifying some exhaust bits on Ryans Beautiful FD Rx7 added some very much needed flex joints and ad...
08/18/2026

Had the Pleasure of modifying some exhaust bits on Ryans Beautiful FD Rx7 added some very much needed flex joints and adjusted his Y pipe to fit in the perfect spot!

I’m absolutely awful with Social Media but ive just been knocking out one project after another here’s some pictures of ...
07/15/2026

I’m absolutely awful with Social Media but ive just been knocking out one project after another here’s some pictures of my most recent work! Dont hesitate to reach out for any and all of your fab needs!

Got the pleasure of working on Rods R33 GTR! Started off with Building a 3” downpipe, midsection and Screamer that I end...
05/14/2026

Got the pleasure of working on Rods R33 GTR! Started off with Building a 3” downpipe, midsection and Screamer that I ended up wrapping in my Inconel heat wrap. Made a 4” polished aluminum intake. On the charge pipe side of things I decided to try and make it look as OEM as possible, tying into the factory charge pipe connector and plating the bracket to cover up where some factory piping went thats no longer needed.

Got a KA-T S13 from Indiana knocked out! With a 2.5” turbo outlet on this HPT turbo I was able to make a really stream l...
04/14/2026

Got a KA-T S13 from Indiana knocked out! With a 2.5” turbo outlet on this HPT turbo I was able to make a really stream line charge pipe kit! Had a good amount of time in his intake welding an IAC plate on, a handful of bungs, and a new Throttle adapter plate to accept his new throttle body. On the exhaust side I was able to get a really tight fitting 3” downpipe and screamer all to clear everything that was in the way. Also was able to get him looking cool while staying cool with some Inconel wrapping!

Probably one of my favorite projects yet! Got the pleasure of building our good friend a ton of goodies for his 1JZ swap...
03/26/2026

Probably one of my favorite projects yet! Got the pleasure of building our good friend a ton of goodies for his 1JZ swapped S13 from mounting the Intercooler to building charge pipes, modifying the core support to tuck the radiator, downpipe to an oval exhaust to tuck as high as possible, screamer pipe, wastegate relocation extension and more! We also took advantage of the Inconel wrapping service I offer so this car will stay just as cool as it looks! 😎

Got a Set of long tubes all wrapped up for a 6.0 LS keeping cool while looking cool! 😎 reach out if you’d like to have u...
02/07/2026

Got a Set of long tubes all wrapped up for a 6.0 LS keeping cool while looking cool! 😎 reach out if you’d like to have up to a 80% surface temp reduction in your project and keep that bay jus as cool as you!

Got the Pleasure of doing a bunch of work to Tylers Ka-T S13, got the cage kits tube front end fitted up and welded earl...
01/10/2026

Got the Pleasure of doing a bunch of work to Tylers Ka-T S13, got the cage kits tube front end fitted up and welded earlier this year, then got to do the intercooler piping, had to modify the factory crash bar to get the intercooler mounted and fit behind, exhaust from the turbo to the mid section, and much more! Cant wait to see this car on the road and functioning as its intended purpose!

Really slacking on the socials but got Grants JZX100 Chaser sitting right with fresh Intercooler, charge pipes and exhau...
12/04/2025

Really slacking on the socials but got Grants JZX100 Chaser sitting right with fresh Intercooler, charge pipes and exhaust! Due to being out of inconel at the time we opted for a ceramic coating on the downpipe. Always looking for more work and challenges reach out and lets build your car to be just as rad! 😎

Got Martys Miata finished up a few weeks ago and turned out Great! 3” downpipe to a v-band right into a simple 3” stainl...
10/20/2025

Got Martys Miata finished up a few weeks ago and turned out Great! 3” downpipe to a v-band right into a simple 3” stainless straight pipe exhaust and 2.5” polished charge pipes!

Address

607 N. Christina Street
Union, MO
63084

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Thermoworks Solutions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Thermoworks Solutions:

Shortcuts

Share

Category