Midwest Boost Works

Midwest Boost Works Welcome to your local 90’s Nissan/Toyota specialists!

Chassis We specialize on:
-Nissan 300zx Z32
-Nissan Skyline GT-R/GTS-T
-Nissan 240sx/Silvia
-Nissan 350z/370z
-Toyota JZ Platforms
-Toyota 4AGE/3SGTE
-Mazda MX5 Miata
and more!

08/17/2026

Scotty’s Z32 TT SINGIN’ on the dyno! Power numbers at the end!

———————————-—————————————————————

Rod’s R33 GTR came out phenomenal! This 68k original mile R33 came to us for some upgrades and updates to bring it into ...
07/31/2026

Rod’s R33 GTR came out phenomenal! This 68k original mile R33 came to us for some upgrades and updates to bring it into the 21st century! Our goal with this car was not outright power, but to enhance the driving experience while keeping the car OEM+ feeling.

First thing was engine management, we removed the old hks piggyback and stock ecu combo for an awesome Wiring Specialties engine harness, Platinum Racing Products r35 coil kit, and Haltech Nexus S3 combo! We paired this with a Garrett - Advancing Motion G30-770 with an ARTEC Performance .75AR turbine housing and reverse rotation manifold! To fuel this thing we ran twin walbro 450, with a full Radium Engineering®️ fuel system, custom AN lines made in house, and some Injector Dynamics 1050x! While upgrading the clutch to the Advanced Clutch twin disk, we noticed atf mixing with the gearbox oil, a reseal was in order for the transfer case to transmission to fix some crusty seals allowing this to happen. king_coatings gave the intake manifold and valve covers a much needed birthday for an awesome oem+ look! Thermoworks Solutions nailed all the fab on this thing, integrating the new turbo setup seamlessly into the car, along with his inconel heat management on the downpipe!

We hit the safe limit of our injectors right at 500whp at all 4 wheels on e85, to keep it on the conservative side we left it there. This car was a treat to put together, drives like a brand new R33 GTR. This unit is ready to be enjoyed and driven hard! 🤘

—————————————————————————————————

07/17/2026

Big Single RB26 Dyno Run Compilation! Rod’s GTR just sounds too freaking good! The Garrett - Advancing Motion G30-770 just sings! Tuned by us on our favorite Haltech Nexus S3 with Wiring Specialties engine harness! Smooth sailing all the way to 8K rpm! 🤘

—————————————————————————————————

We have been super behind on posts, we are trying to catch up! However, We recently wrapped up TJ’s built KA-T S13! This...
07/06/2026

We have been super behind on posts, we are trying to catch up! However, We recently wrapped up TJ’s built KA-T S13! This car came to us needing a lot of wrapping up and tuning, which we took care of! This car sports a Wiring Specialties engine and chassis harness package, along with a Link Engine Management monsoon x and sensor package controlling everything! Our friend at Thermoworks Solutions knocked out an awesome chargepipe and downpipe kit + inconel heat wrap to finish it all off! This car made a nice 420whp on pump gas and is ready for whatever gets thrown at it! We love our KA-T’s here and this one was no exception! 🤘

—————————————————————————————————

05/26/2026

Some smooth power out of this built KA-T S13 rocking an new 5862 turbocharger! This thing rips! 🤘

—————————————————————————————————

Here’s a quick in and out job we knocked out! Rell brought us his super clean R33 GT25S-T in for a quick timing belt, se...
04/13/2026

Here’s a quick in and out job we knocked out! Rell brought us his super clean R33 GT25S-T in for a quick timing belt, seals, and water pump replacement! Just some basic maintenance to keep this thing on the road for many miles to come!

—————————————————————————————————

Heath brought us his really clean, mostly stock, R32 GTS-4 in for a quick tune up! This car had been through a couple ha...
03/10/2026

Heath brought us his really clean, mostly stock, R32 GTS-4 in for a quick tune up! This car had been through a couple hands too many and had some small goofy issues that we easily resolved. We got the tune dialed in to what it needed to be! Simple street tune so no dyno numbers on this one. But she pulls strong at 10-11psi! This is a super fun car that would make for an awesome year round daily driver! It’s finally ready to be reliably enjoyed! 🤘

Some SR20 goodness we wrapped up! Damon’s S13 track car was brought to us to update the engine management package to the...
03/05/2026

Some SR20 goodness we wrapped up! Damon’s S13 track car was brought to us to update the engine management package to the 21st century! We got him setup on a SR20 G4x plug in with a link sensor package! Our customer also provided a sweet R35 coil kit to really dial in the modern reliability! The car fought us a bit, the water methanol system was not operational, the car had some trigger sync issues, and a damaged oil drain line ended our first dyno session early. Got all of that fixed and the car now runs flawlessly! We also opted to install a 4pos trim switch in the car to better tune power for track specific applications! You can see the different power levels in the dyno graph! Not too shabby for a pump 91 SR20! This car feels great and is ready for its next track day! 👌

01/26/2026

1 J Z - G T E

🎥:

We love customer feedback like this, this thing makes all the right sounds.

Our last car we pumped out in 2025! Grant’s JZX100 Chaser is now the ultimate street car! We worked on this car previous...
01/14/2026

Our last car we pumped out in 2025! Grant’s JZX100 Chaser is now the ultimate street car! We worked on this car previously to get the suspension right and it wasn’t long until he wanted some more power! We got him squared away with the ultimate street car power package that drives like factory car, yet makes solid power! This thing is a riot to drive and makes all the right sounds, we are super happy with how this car turned out! 🤘

Some highlights below ⬇️
custom JZX100 Engine Harness
Nexus S3 ecu + HT sensor package
1jz turbo manifold and G30 .75 A/R turbine hsg
45mm ewg
intercooler
G30-660 turbo
id1050x
fuel rail and FPR
fabbed up our ic setup and downpipe
powder coating for the VC’s and ceramic coat downpipe
JZA80 full brake kit
clutch kit

Address

607 North Christina Street
Union, MO
63084

Website

Alerts

Be the first to know and let us send you an email when Midwest Boost Works posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Midwest Boost Works:

Shortcuts

Share

Category