Goliath off-road Garage & Fabrication

Goliath off-road Garage & Fabrication GOLIATH OVERLAND OUTFITTERS
Manufacturers of high quality off road armor, installation and service.

Custom off road fabrication
Full off road modyfications
Parts installs
and much more... !

New product for Lexus GX470 - Trailer plug relocation bracket. Factory trailer plug bracket hangs low and straight down,...
09/01/2026

New product for Lexus GX470 - Trailer plug relocation bracket.

Factory trailer plug bracket hangs low and straight down, making it prone to be smacked by rocks and other obstacles when off roading. With most aftermarket bumpers it’s also fully exposed and nobody wants to look at that. Our bracket relocates it between frame rail and rear crossmember, out of harms way.

100% bolt on installation using factory bolts. No wire extensions or any sort of rewiring is needed.

First Cruiser parts launching soon 🚀
08/25/2026

First Cruiser parts launching soon 🚀

A little sneak peek of what we’ve been up to recently. We are getting ready to finalize and release a couple new bumpers...
08/06/2026

A little sneak peek of what we’ve been up to recently. We are getting ready to finalize and release a couple new bumpers and accessories, including this GX460 high clearance front bumper. Will be posting more info and details about it as we get closer to the release!

A little sneak peek of what we’ve been up to recently. We are getting ready to finalize and release a couple new bumpers...
08/06/2026

A little sneak peek of what we’ve been up to recently. We are getting ready to finalize and release a couple new bumpers and accessories, including this GX460 high clearance front bumper. Will be posting more info and details about it as we get closer to the release!

Shop pics, busy season in full swing. Lots of stuff going out. Have fun wheeling and camping before the summer is over! ...
07/28/2026

Shop pics, busy season in full swing. Lots of stuff going out. Have fun wheeling and camping before the summer is over!

06/24/2026

Prototype rear bumper 🤝🏼 Forklift

Most rear bumpers on the market lack adequate supports, bracing, or material thickness. That results in excessive movement, misalignment, and even body damage in extreme cases.
We make all of our bumpers from 5 mm steel instead of 3 mm like some other manufacturers. This combined with properly designed brackets, supports, and bumper body, results in a super strong and rigid bumper that you can trust!

In this short video we lifted the whole rear end of the 100 series Land Cruiser by our prototype rear bumper to prove that it doesn’t move even in extreme cases. Not only that, instead of lifting it with the forks under the bumper, we lifted it by the recovery points which creates a huge leverage upwards. This scenario is almost impossible to even duplicate on the trail.

Tag us 🏷️ to get featured!

We just added a satin black powder coat finish as an option for our ultralight propane tank mounts! Get one before the c...
05/06/2026

We just added a satin black powder coat finish as an option for our ultralight propane tank mounts!

Get one before the camping season ends…or start…depending where you live!

04/16/2026

The first GX460 scanning sesh went well and we’re ready to start working on some new parts soon!

Our ultra light propane tank mounts are now available! How light? 2.3 Lbs light!Full aluminum construction, laser cut an...
04/10/2026

Our ultra light propane tank mounts are now available!

How light? 2.3 Lbs light!

Full aluminum construction, laser cut and CNC bent for precise fit and finish, rubber bump stops to prevent metal on metal contact, and lockable padlock ready latch. Tons of mounting points to fit your camping setup!

For more info head to our website goliathoffroad.com

The best off road jack mount, now fun sized! Introducing the Goliath Off Road jack mount for Badlands new 1.5 ton jack! ...
04/06/2026

The best off road jack mount, now fun sized!

Introducing the Goliath Off Road jack mount for Badlands new 1.5 ton jack! Same features and performance as on our 3 ton mount, just smaller.

Features:
- Zinc coating for ultimate rust protection, oem look, and superior long lasting finish.
- Laser cut and CNC bent for high quality fit and finish.
- Quick snap rubber lined tabs to hold your jack handles and prevent rattling.
- Rubber bump stop which means no metal on metal contact.
- Lockable, padlock ready latch.
- Stainless hardware.
And lastly, proudly made in USA! 🇺🇸

Address

960 Duck Box Road
Umatilla, FL
32784

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5am
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+13212038823

Website

Alerts

Be the first to know and let us send you an email when Goliath off-road Garage & Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category