Jay of all trades PDX

Call Directions Website Contact the business

Jay of all trades PDX Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Jay of all trades PDX, Motorhome repair centre, P. O. Box 22, Troutdale, OR.

10/22/2026

Check this out!

This Honda K24 header that we applied our Thermotek treatment on is already installed back on The car and is headed to Ridge Motorsports Park this weekend for some real world testing. We definitely anticipate a significant drop in engine bay temperatures, which would also imply an increased range of performance over an eight hour race.

Also, if wires or anything become dislodged, the chance of them melting directly to the header immediately is much less and does indeed happen sometimes in a racing environment.

Keep the heat where it belongs with our Thermotek treatment!

09/17/2026

A little blast from the past with Frank Ross at PIR

Had to be careful in front of the flaggers and start finish😝

Hard to say no to a good bump draft🏁

Gearing up for the 51st annual ICSCC Racing enduro at Portland International Raceway i’m super excited and honored to be...
09/15/2026

Gearing up for the 51st annual ICSCC Racing enduro at Portland International Raceway

i’m super excited and honored to be one of the drivers that will be piloting the number 27 Norsk Racing Radical Motorsport
Radical SR1

I will be in the car from 11 to 12 and it’s free to come watch!

You don’t have anything going on Saturday come down to Portland international raceway and say hi! We will be in pit spot 19.

This DOC RACE® - Custom Turbo Kits down pipe was first sprayed with CERAKOTE® then I got to work applying our F-1 style ...
09/01/2026

This DOC RACE® - Custom Turbo Kits down pipe was first sprayed with CERAKOTE® then I got to work applying our F-1 style thermo heat shielding.

Do you think the Cerakote treated pipe will perform better than raw stainless after our treatment?

As soon as BayaniBuilt has it on the car making some numbers, we will have some real world answers to that question.

I feel like it has to do something for us but the pyrometer will be the real test. With everything applied as the numbers would state we should have somewhere around 800° drop in temperature on the external temperature of the pipe!

I had a ton fun on Friday playing in our local city park here in with Sports Car Club of America Track Night In Americ...
09/01/2026

I had a ton fun on Friday playing in our local city park here in with Sports Car Club of America Track Night In America!

This was was also the first time I was able to put my Cobalt Racing Brakes to the test after I swapped over the entire breaking system to the 2010 BMW 135i 6 piston set up. This car is also utilizing a non-boosted breaking system with a proportional valve. No traction control. No ABS.

Way more than enough braking power to get the job done 💪

Thank you Chris Trask for the awesome shots 📸🏁
•
•
•
•
•
•
•

08/09/2026

This was a super fun project!

This is an ExtremeTurboSystems top mount set up for an A90 Supra.

This kit will be rocking Precision Turbo & Engine 6466 and making plenty of power for Matt Kincaid to hurt some feelings at the local track days here in the

My job here was to keep the heat in and I think I got that handled!

With this technique, it’s been proven to reduce the external temperature of each component by 70%

Cooler temps = more power!

07/21/2026

A few Downpipes in progress! One is for and his A90 Supra with an top mount set up and one is for and his top mount e36 project.

A final weld out on them and then onto the wastegates, turbo housings, dump pipes, and a few more small items that will benefit from heat management.

It’s always fun seeing the systems you built years later still up and rocking! This time around it was a for Mobile inst...
06/29/2026

It’s always fun seeing the systems you built years later still up and rocking! This time around it was a for Mobile install. I cruised out and permanently wired in a power supply for the

This is built to go places and stay for a while.

It’s been awhile but I’m back! The regular content will be changed a little to a bunch of different things as Jay of all...
06/12/2026

It’s been awhile but I’m back! The regular content will be changed a little to a bunch of different things as Jay of all trades has begun operation. But for now, we are starting with a 408 amp hour power system!

This one is headed to in North Carolina. It features all of the good stuff from and can be installed in a matter of a couple of hours. Everything is pre-programmed and ready to go as a drop-in unit.

fully customizable power systems for any application designed in CAD is a true possibility at this point. This one is headed for a sprinter van, but anything is possible.

Address

P. O. Box 22
Troutdale, OR
97060

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm

Telephone

+15032675744

Website

Alerts

Be the first to know and let us send you an email when Jay of all trades PDX posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Jay of all trades PDX:

Shortcuts

Share

Category