Dailey Engineering

Dailey Engineering Custom Dry Sump Oil Pump and Pan Systems Custom Dry Sump Oil Systems

Repost from •Today these fine engineers from all over the world compete for 1.5 million dollars around the Indianapolis ...
10/23/2021

Repost from

Today these fine engineers from all over the world compete for 1.5 million dollars around the Indianapolis Motor Speedway. Juncos built Dallara race cars powered by 4P direct injected turbocharged 4 cylinder engines, meticulously crafted by our own Justin Shepard and engine controls and track support by Damon Elff at Demon Motorsports and Nick at Motec USA. Having grown up here, this is a huge honor to have this opportunity. I want to thank those that had an impact for us… Dr. Robert Prucka and the Clemson team, Matt at ESN, Juncos Racing, Indiana Economic Development, Roger Penske, Luis at Clutch Masters, Bill Dailey, Heath Norton and the Callies team, Vinny at HPD.
Not just one fully autonomous race car was produced in short time from scratch…but a fleet of cars and teams.
May the best team win!

Repost from •Flexin💪 Happy Friday!!
09/11/2021

Repost from

Flexin💪 Happy Friday!!

Repost from •Some external wet sump and dry sump setups arrived from  👌🏽These will be going on some up coming Dart LS Ne...
04/13/2021

Repost from

Some external wet sump and dry sump setups arrived from 👌🏽
These will be going on some up coming Dart LS Next and LS Next II twin turbo builds 😎

Repost from •Some eye-candy for you going into the weekend. Here’s the Katech TA2 Engine, shown dressed for  & M1 Raceca...
04/09/2021

Repost from

Some eye-candy for you going into the weekend. Here’s the Katech TA2 Engine, shown dressed for & M1 Racecars applications. We have over 40 years of racing expertise into these engines, which has resulted in 5 podium spots and another 7 top-ten finishes so far in the TA2 series.

We put this same expertise into every vehicle package, crate engine, and performance part we offer to you, our track-day customers.

Find yours today at our website (link in bio)!

Thank you  and  for trusting   for your oiling needs.
02/26/2021

Thank you and for trusting for your oiling needs.

Repost from •Test fitting our new pump design on a cast block but destined for a Billet Block! Our custom built Dailey 5...
02/11/2021

Repost from

Test fitting our new pump design on a cast block but destined for a Billet Block! Our custom built Dailey 5 stage with high scavenge capability and 14gpm Waterman Racing pumps. Watch this space✌️

Repost from •Well the  C10 showed us how important a good oiling system is once you can go fast enough through a turn. S...
02/05/2021

Repost from

Well the C10 showed us how important a good oiling system is once you can go fast enough through a turn. So we researched to find the best dry sump company in the country and became a dealer. Here are 3 LS set ups. The craftsmanship is second to none. All we can say is WOW!

Repost from •4P K20C1 Type R engine turned up
01/15/2021

Repost from

4P K20C1 Type R engine turned up

Congratulations to  and  for their Score International Baja 1000 win. Thank you for trusting   for your complete oiling ...
12/10/2020

Congratulations to and for their Score International Baja 1000 win. Thank you for trusting for your complete oiling needs.

Repost from •Nissan RB29💪                   R34                       becauseracecar
11/26/2020

Repost from

Nissan RB29💪 R34 becauseracecar

Here is our latest dry sump system for the GM Gen V LT1 engine. This system was designed to fit in a Corvette without an...
11/05/2020

Here is our latest dry sump system for the GM Gen V LT1 engine. This system was designed to fit in a Corvette without any modifications to the chassis, steering, motor mounts, or serpentine accessories while clearing up to a 4.400” stroke with aftermarket rods.

Repost from •Kroyer Racing Engines 540ci BBC.                   @ Dailey Engineering
06/11/2020

Repost from

Kroyer Racing Engines 540ci BBC.
@ Dailey Engineering

Address

42095 Zevo Drive, Unit 7
Temecula, CA
92590

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+19512962110

Alerts

Be the first to know and let us send you an email when Dailey Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Dailey Engineering:

Share