SoReal Sounds

SoReal Sounds Custom car audio & vehicle upgrades. Sound • Integration • Comfort • Safety
📞 Call: 781-435-2136
💬 Text: 781-435-6324
📧 [email protected] Do you love music?

SoReal Sounds specializes in making your driving experience better! Making your vehicle sound better, look better, and safer to drive! We focus on providing quality installation for long lasting performance! We also take our time to ensure the products we provide will be the best for your needs! We sure do! Whether you are looking for your music to sound as real possible or if you want it to be as

loud as it can be with out distortion, we have got you covered! Wish your car was not so noisy on the highway? The loud noise of the vehicle give you a headache? We have many types and levels of sound treatment to eliminate the noise! Wish you could see better at night while driving? We have many lighting solutions for better visibility on the road! Want your vehicle to look better? We provide window tinting options and accent lighting to enhance the look of your ride! Drive fast? Worried about getting a speeding ticket? We offer Radar Detection systems to give you advance notice of radar guns! Does your vehicle have blind spots making it hard to see? We have many types of collision avoidance systems making your driving conditions safer! Hate getting into a freezing or boiling hot vehicle? SoReal Sounds has all different types of remote start systems to satisfy your desires! Tired of being at fault for an accident when it wasn’t because of you? Dash Camera systems are the answer and we have those answers! Want to protect your ride from thieves? We can provide security solutions to slow down and deter any their! Come in to our facility and let us show you what’s possible! Make your vehicle truly yours and create a driving experience that excites your day!

09/07/2026

Told you those weren’t all the speakers… 😂🔊

Adding even more speakers to locations in this Jeep where there originally weren’t any.

6.5” and 4” speakers going in the front doors — and we’re still not done. 👀

09/06/2026

Rear-end damage took out the factory backup camera on this Ford Transit.

The replacement factory camera alone was nearly $1,000 — before installation. 😳

So instead of simply replacing it, we found another solution.

We integrated an aftermarket backup camera into the factory camera housing and connected it to the factory mirror display — keeping everything looking and functioning the way it should without adding an aftermarket screen.

Best part?

The entire job was completed for less than the cost of the factory camera alone. 🙌

Sometimes the solution isn’t just replacing a part. It’s figuring out a better way to make everything work together.

09/05/2026

Got speakers? 🔊😂

And this isn’t even all of them…

We’ve shown you some of the wiring, processing and amplification. Now it’s time to get into the speaker side of this Jeep build. 👀

KICKER

🍂 DroneMobile Fall Sale!10% off select subscriptions through September 10th.All the details are in the slides 👆 ...
09/04/2026

🍂 DroneMobile Fall Sale!

10% off select subscriptions through September 10th.

All the details are in the slides 👆

DroneMobile

09/04/2026

All that cable management had to be for something… 😂

Here’s the finished rack. 👀

5 amplifiers. One side window rack. 🔊⚡

With only enough surface area to mount three amplifiers directly to the rack, we had to make our own space for the other two.

Custom fabricated mounts allow the 4th & 5th amplifiers to float above the amplifiers below — giving us five amplifiers in a very limited amount of real estate.

Everything mounted, pre-wired, organized and ready to make its way into the Jeep. 👌

And remember… this is only ONE side of this build. 😂

09/03/2026

With five amplifiers being packed onto this side window rack, there’s a LOT of wiring that needs to be routed, secured and kept organized.

Here we’re trimming the excess from the wire ties after getting everything secured into place.

It’s a small part of the process, but the little details add up when you’re putting together something with this much going on.

And yes… all FIVE amplifiers are on this rack. 😂🔊

Full rack reveal coming next. 👀

09/02/2026

Remember when we said there was even MORE equipment going into the other side? 😂

Here it is. 👀

Three amplifiers are already mounted to the second side window rack… but we still need to fit TWO more.

With no more room to spread out, we’re going vertical again. 🛠️

Custom mounts will allow amplifiers #4 and #5 to float above the equipment already mounted below — giving us five amplifiers on one side window rack. 🔊⚡

This video gives you a little preview of where everything is going before we finish fabricating the remaining mounts and get it all put together.

When space runs out… start creating more of it. 😂

09/01/2026

Plans changed… so we changed with them. 👌

The second subwoofer amplifier is out, the second DSP is in, the custom raised mount is finished, and everything is wired into its new home.

Adding the second DSP gives us the additional processing needed for all of the multi-channel amplification going into this Jeep — while still keeping everything packaged onto the side window rack.

A lot had to fit into a very limited amount of space, but this side of the Jeep is officially coming together. 🔊🛠️

And if you think there’s a lot of equipment here…

Wait until you see the other side. 😂👀

AudioControl

08/31/2026

It’s the small details that keep a big system organized. 👌

With the second DSP mounted, it’s time to start getting it wired up.

Each of our custom-made RCA cables gets color-coded heat shrink to identify the individual signal channels — making it easier to keep track of what’s going where during installation, tuning and any future service.

When you’re dealing with this many channels, organization is crucial. 🔊

08/30/2026

New equipment meant another custom solution. 🛠️

We had the footprint to fit the second DSP where the amplifier was being removed… but simply mounting it flat to the rack wasn’t going to work.

There was already wiring running through that area, with more still needing to be added.

So instead of relocating everything, we fabricated a custom raised mount that allows the DSP to sit securely above the existing wiring while still giving us the clearance needed underneath.

A little cutting, shaping, test fitting and fabrication later… the second DSP has its new home. 👌

Mounted ✔️
Next up: wiring it into the rack. 🔊

AudioControl

Address

52 Montvale Avenue
Stoneham, MA
02180

Opening Hours

Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm
Saturday 9am - 3pm

Telephone

(781) 435-2136

Website

Alerts

Be the first to know and let us send you an email when SoReal Sounds posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to SoReal Sounds:

Shortcuts

Share

Category