Shaw Mechanical Engineering

12/17/2025

Jeremy Shaw Katherine Hughes Anthony Vanryswyk

We make things happen!

My creation is ready for official demonstration.
Almost two years of hard work is in this, meet Goliath #01. Ready for action at GPA Port Of Brunswick.

07/04/2025

Wishing everyone a safe and happy 4th of July!
And don't forget, MERICA BABY!

01/18/2025

New nozzles installed as well water pressure relief valve installed to help get the bounce out of our high pressure water feed and now we can turn pressure down to 1100 psi on our water to increase our run time on 1000 gallons of water. Oh and a new tire installed on our forklift.

01/05/2025

High pressure oil pump failing at operating temperature, works great cold start up but once the oil gets hot and thins out pump struggles to make 400psi, at minimum the pump has to make 500psi to fire the injectors correctly for ignition to happen and much better if it makes 550psi at startup. Replacement on these pumps isn't very difficult and takes about 2 hrs to make sure it's done right.

01/03/2025

CP4 failure (disco party 😅), adapted to a CP3, HP rails, 8 new injectors, egr "modification", 50 hp tune written in house with EFI LIVE FSV3.

Also available for:
Ford tuning and ecm unlock available (HP Tuners)

Cummins tuning and ECM unlock (EFI LIVE FSV3)

Call us today: 912-839-9440 office, 912-314-8717 mobile.

We are mobile or bring it to our shop.

12/05/2024

Old engine is out and stripped down, now we have to seal it all up and continue swapping the old engine accessories and such. It'll be ready for install by close today.

12/04/2024

Let's reseal this antiques engine and transmission.
1960 Ford Fairlane

12/03/2024

Let's swap an engine.

11/24/2024

Performance Sunday.
X-pipe install on the Mustang.
X-pipe install on the Camero.

American muscle and bald eagle sounds, gotta love the sports car world or life would just be boring behind the wheel.

11/12/2024

This is what no oil/low oil looks like. This is a high dollar transmission used let alone new. If you have any type of leaks around these smaller manual transmissions in pickup trucks and cars you're in for trouble. They do not hold very much oil to start with so if you're not regularly checking for leaks it's gonna be a quick death for your driveline. Check you fluids regularly, and save yourself 2300 plus dollars and peace of mind. Also it's much cheaper to pull these transmissions and reseal them than it is to have to replace it. This trans could be built yes but that would cost the customer more than a good used unit, but it would have been half that to pull it and reseal it in one day, less down time, less money down the drains.