NWA Fleet Sales

Directions Website

NWA Fleet Sales We are a small independent truck body up fitter, dealer and manufacturer based in Springdale, AR.

Back up for sale! Quick sale price of $49,950.2019 Isuzu NRR - Trash Cat 47EThis is a 2019 Isuzu NRR with an Electric Tr...
10/06/2026

Back up for sale! Quick sale price of $49,950.

2019 Isuzu NRR - Trash Cat 47E

This is a 2019 Isuzu NRR with an Electric Trash Cat 47 Body designed to haul 12 and 14' Texas Pride and U-Dump dumpsters.

This truck has gone through our refresh process to get this truck looking as close to new as possible! Its also been to the dealer for a fresh service including new brakes, fluids and a new Turbo!

The truck is setup with room behind the cab for a backpack tool box. We are offering the truck at a lower price without the tool box first or can add it for an additional charge.

----Truck Chassis----
*114,586 Miles
*5.2 Isuzu I-4 Diesel Engine (11 MPG Average)
*Aisin Automatic Transmission
*19,500 GVW
*9,740lb Empty Weight w/ Driver
*Fresh Service - Fluids
*Fresh DOT
*New Brakes

----Truck Body----
*Warn 15k Electric Winch
*Scissor Hoist (For high payload)
*In Rail Rollers
*LED Tail Light Package
*Full Wireless Controller
*Backup Controls on Hoist
*Adjustable Gantry Tarp System
Asking $49,950

Financing Available
Shipping Available

NWA Fleet Sales
1405 S Ingram St
Springdale, AR 72764

This 2027 Freightliner M2 just hit the lot and is ready for a body!300HP 6.7 CumminsAllison 3500RDS26,000 GVWAir RideLoc...
10/05/2026

This 2027 Freightliner M2 just hit the lot and is ready for a body!

300HP 6.7 Cummins
Allison 3500RDS
26,000 GVW
Air Ride
Locking Diff
Fully loaded with key fob and apple car play!

We can upfit this with;

FORGE SR1830 - 18’ 30k Standard Rail
FORGE DR1830 - 18’ 30k Dual Rail 36”/47”
FORGE CH14S/CH16 - 14’ or 16’ 60” Hoists
Swaploader SL214 / SL222

Completed trucks with hydraulic tarp system will range in the $158-165k range.

10/04/2026

Our last 2026 expo truck is headed home. This 60” rail truck is going to make the operators life much easier!

🔥 ANOTHER FORGE CH14S SOLD! 🔥If you stopped by and saw us at the Dumpster Expo at Texas Motor Speedway, you probably rec...
10/04/2026

🔥 ANOTHER FORGE CH14S SOLD! 🔥

If you stopped by and saw us at the Dumpster Expo at Texas Motor Speedway, you probably recognize this truck!

This 2018 Freightliner M2 equipped with our FORGE CH14S 60” rail roll-off system is officially SOLD and headed home to Illinois, where it’ll be joining a fleet of Freightliner rollback tow trucks.

Powered by the proven 6.7L Cummins paired with an Allison automatic transmission, this M2 makes a great platform for the CH14S — compact, maneuverable, easy to operate, and still capable of doing some serious work.

⚖️ Scale Weight: 13,800 lbs
💪 Available Payload: 12,200 lbs
🚛 26,000 lb GVWR — Under CDL

The FORGE CH14S is built around versatility and operator convenience, featuring:

🔹 60” rail system
🔹 Dual 4” lift cylinders
🔹 15K hydraulic WARN winch
🔹 Sliding tray function
🔹 Full wireless controls
🔹 Exterior manual controls
🔹 Adjustable gantry tarp system
🔹 Super Mesh tarp
🔹 Poly fenders
🔹 11-light LED rear bumper with backup alarm

Before this one heads north, the customer had us make a few additional upgrades:

🧰 36” toolbox
🪵 Wood box
🔗 Trailer hitch

This is exactly the kind of truck we like putting together — a lightweight, capable roll-off package that maximizes usable payload without giving up the features of a larger system.

From the show floor at Texas Motor Speedway to its new home in Illinois — another FORGE-equipped truck ready to go to work. 🇺🇸

Need a roll-off truck built around the way you operate? Whether you’re looking for a new chassis, refurbished truck, under-CDL setup, or a custom rail configuration, NWA Fleet Sales can build it.

📩 Message us to get your next truck started.

10/01/2026

A 36” rail solution for those needing the maneuverability of a pickup chassis with max payload. NWA Fleet Sales

🔥 Another FORGE build headed to work! 🔥We recently wrapped up this 2023 Ram 5500 4x4 for HD Dumpsters in Missouri, and t...
10/01/2026

🔥 Another FORGE build headed to work! 🔥

We recently wrapped up this 2023 Ram 5500 4x4 for HD Dumpsters in Missouri, and this truck turned out sharp! The red Ram fits right in with their red power-tool-themed fleet. 🛠️🔴

At the heart of this build is one of our newer hoist designs — the FORGE SR1615AFW.

Don’t let its size fool you. This compact powerhouse was designed around strength, simplicity, and a quick installation, utilizing an above-frame design that keeps the installation clean and efficient.

⚙️ FORGE SR1615AFW
• 15,000 lb rated capacity
• Handles dumpsters up to 16’ long
• 52° dump angle
• Dual lift cylinders for maximum lifting power and stability
• Hydraulic winch for strong, uninterrupted pulling power — without the headaches of an electric winch
• Above-frame design for a streamlined installation

🎮 Controls
• Full wireless control system
• Exterior manual controls

☀️ Tarp System
• Lightweight, fully hydraulic design
• Adjustable hydraulic gantry
• Two integrated work lights

For this hoist, we chose dual lift cylinders instead of a traditional scissor hoist, giving this compact setup plenty of muscle while maintaining excellent stability throughout the lift.

The result is a small-footprint roll-off system that punches well above its weight.

A big thank you to HD Dumpsters for trusting us with the build. We think this one is going to look right at home in Missouri! 💪

FORGE — Built to Work. Built to Last.

09/29/2026

A brand new HX-620 with a swaploader SL-520X built for Rush Truck Centers.

🔥 2027 International HX620 | SwapLoader SL-520X 🔥We just wrapped up this heavy-duty 2027 International HX620 build for R...
09/29/2026

🔥 2027 International HX620 | SwapLoader SL-520X 🔥

We just wrapped up this heavy-duty 2027 International HX620 build for Rush Truck Centers — and this one is set up to handle some serious work.

We outfitted this HX620 with:

🔹 SwapLoader SL-520X Hooklift
• 50,000 lb. lift & dump capacity
• 60° dump angle
• Accommodates a wide range of body lengths
• Dual lift cylinders
• Sliding jib design
• Built for demanding Class 8 applications

🔹 13,200 lb. Drop Axle
Added to increase axle capacity and help distribute the load when this truck is working heavy.

🔹 Rack & Pinion Tarp System
A heavy-duty tarp setup that keeps loads covered while providing a clean, streamlined installation.

The International HX620 paired with the 50K SwapLoader SL-520X makes for an extremely capable and versatile setup. One chassis, multiple interchangeable bodies, and the capacity to handle some serious loads.

A big thank you to Rush Truck Centers for trusting NWA Fleet Sales with the upfit on this truck. We appreciate the opportunity to be a part of this build!

🚛 NWA Fleet Sales
Custom Roll-Offs • Hooklifts • Truck Upfits •

Springdale, Arkansas

Address

1405 Ingram Street
Springdale, AR
72764

Opening Hours

Monday 7am - 5pm
Tuesday 7am - 5pm
Wednesday 9am - 5pm
Thursday 7am - 5pm
Friday 7am - 5pm

Website

Alerts

Be the first to know and let us send you an email when NWA Fleet Sales posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category