Paul's Automotive

01/28/2026

This dryer was in such a bind that it almost ruined the motor. Hair and lint from just normal operation. Your dryer will last longer and work better if it gets a good cleaning and check up at least every 6 months. Not to mention the fire hazard they become without proper maintenance. Bring them to me for the best price and guarantee.

01/24/2026

Have you cranked your generator? You're probably going to need it holler at me if it won't crank. Don't wait until you need it make sure it's running now.

01/21/2026

Crank those small engines once a week and let them run for 10 minutes you can thank me later

12/10/2025

Crank your lawnmower every week for 5 minutes to keep the fuel from clogging the carburetor. Also a 10$ trickle charger from harbor freight will save you from having to buy a new battery. Bring your mower over now for service to get it ready for spring.

06/06/2025

Get that lawn mower serviced cleaned and those blades sharpened for a better mowing experience come see me for a low price I can have you back on the yard quickly

automotive repair, small engine repair, appliance repair and sell. wood working. and a little bit of you name it.

06/06/2025

Lent in a dryer is a very good fire starter and that's good if you're camping but it's not good if it's stuck in your dryer have your dryer cleaned out and serviced yearly at least bring it to me and for a low cost you can save bundles. It makes your dryer run better and it keeps it from getting overheated and stopping. Plus it protects your home from fire.

03/03/2025

Now is the time. Get your lawn mower ready. Sharpen blades. Replace old gas. Change oil. Check filters. Get batery charged. Bring to me and if you bring your on parts it speeds up repair time. Ordering online is a lot cheaper. Just holler at me for appointment.

10/23/2024

If you are done with your mower or other small engines for a while, then crank it up and then turn the gas off and let it run out of gas. This keeps gas from staying in the carburetor and gumming it up. If it doesn't have a shut off valve, then take a pair of needle nose vice gripps and pinch the fuel line between the tank and carburetor. This works great. You'll thank me later.