Triple Seven.

Triple Seven. Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Triple Seven., Cars, 113 Midway Drive, Sebring, FL.

Final Call: Sunday at 11:59pm EST orders for this batch of TCR Bumpers for FK8 close and will not reopen. Production wil...
09/04/2026

Final Call: Sunday at 11:59pm EST orders for this batch of TCR Bumpers for FK8 close and will not reopen. Production will then begin, if you’d like one, this is your last call.

08/24/2026

Activate the air brakes

Australia’s pretty cool, what they do with our American cars are event cooler. When the Gen 3 Australian Supercar came o...
08/14/2026

Australia’s pretty cool, what they do with our American cars are event cooler. When the Gen 3 Australian Supercar came out, we made brake ducts that allow you to fit 3” brake ducts on your Mach 1 or Mach 1 Style bumper to caliper cooling brackets. We’re running a discount on them over the course of this weekend using “ICY”.

TCR Bumper is back one more time.If you’ve been following along, you know we developed this bumper a while back and ship...
08/13/2026

TCR Bumper is back one more time.

If you’ve been following along, you know we developed this bumper a while back and shipped our first batch about two years ago. We’ve had a lot of people ask for another opportunity to get the TCR front end for themselves so we’re bringing it back for a limited run.

The TCR Front end was designed with data from the factory Honda TCR Race Car many of you are familiar with, we adapted it to carry over features you’d expect from the race car while fitting on the FK8. There is both a Carbon Fiber and Fiberglass version.

Chassis Mounted Splitter: The chassis mounted splitter we use is Quick Release, 20mm thick Nylon Foam Sandwich with 6x Carbon Mounting Points to the North American crash bar.

Fog Lights: If you option out fog lights instead of the standard block off plate, you have the choice of either yellow or clear pods. Both very bright and tap into the factory fog lights instead wiring.

Brake Ducts: The pair of 3” inlets route to ducts we designed that mount to the factory fender liner, allowing more cooling than the factory lip.

I attached the installation video here, as well as the order links.

For the first Carbon Fiber order we’ll include a free set of rear bumper vents.

For the first 3 Fiberglass we’ll include a free pair of Motorsport Door Releases.

Carbon Fiber: https://tripleseven-na.com/products/2017-2021-fk8-type-r-tcr-style-front-fascia-carbon-fiber

Fiberglass: https://tripleseven-na.com/products/2017-2021-fk8-type-r-tcr-style-front-fascia-fiberglass

Installation: https://youtu.be/p7CeATyXVQ4?si=j-oYJgr9l80kF84a

08/13/2026

E9X M3 with our GT3 and Flat Bottom wheel

08/12/2026

It’s always quicker switching to your secondary. Check the link in bio if you want to pick one up for yourself.

08/12/2026

The new Triple Seven GT3 wheel and flat bottom Alcantara, which are you taking?

08/12/2026

Which is better, our GT3 wheel or traditional flat bottom?

Need your help: shelved was our GT3 rear wing project that we’d like to bring back from the dead. We’d like to make a re...
07/27/2026

Need your help: shelved was our GT3 rear wing project that we’d like to bring back from the dead. We’d like to make a replacement for your back glass, which allows the wing to mount to the chassis, and no holes drilled into the quarter panel. GTD does not have a trunk, your car does. The wing will be able to pivot forward like the third slide to grant access to the trunk. But which of the two below would you prefer?

Address

113 Midway Drive
Sebring, FL
33870

Website

Alerts

Be the first to know and let us send you an email when Triple Seven. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category