East Speed

East Speed Domestic muscle performance parts and installation. Truck and jeep as well. Book our Dyno today!

Bronco in for a  Procal tune, keep your warranty and get better performance at the same time!
06/17/2026

Bronco in for a Procal tune, keep your warranty and get better performance at the same time!

06/12/2026

363 sbf with a Vortech V3 on the Dyno in Skippack PA!!!

Convertible fox in for a heart transplant.Removed a stock block motor for a  363 paired to  V3 S trim, all controlled by...
06/12/2026

Convertible fox in for a heart transplant.

Removed a stock block motor for a 363 paired to V3 S trim, all controlled by a Holley terminator x.

The car was also treated to all new suspension by , so now has plenty of power and handles great

Stay tuned, just might be back in the future for a supercharger upgrade….

Gen3 coyote car in for a  cold air intake and  custome 93 octane tune.💪💪
06/08/2026

Gen3 coyote car in for a cold air intake and custome 93 octane tune.💪💪


Come see us at the all ford nationals show in Carlisle Pa this weekend June 5th and 6th.We will be in spots d7-d17 and w...
06/04/2026

Come see us at the all ford nationals show in Carlisle Pa this weekend June 5th and 6th.

We will be in spots d7-d17 and will be with and , stop by and say hi and get show pricing on parts and tuning!

Also will be here him self doing the tunes!

Gen 3 s550 in for a laundry list of upgrades…Started off with  billet oil pump gear and crank sprocket and the customer ...
05/26/2026

Gen 3 s550 in for a laundry list of upgrades…

Started off with billet oil pump gear and crank sprocket and the customer also wanted the timing components changed since we were in there, so went with timing kit.

Then we installed then gen 6 3.0L and a new clutch kit.

Ended up as always with a trip to the rollers with to get it all dialed in.


C6 Z06 in for a set of  long tube headers,  carbon cold air intake and a  intake manifold with a  Topped off with a trip...
05/21/2026

C6 Z06 in for a set of long tube headers, carbon cold air intake and a intake manifold with a

Topped off with a trip to the rollers, this car already had a cam installed and heads done by Frankenstein and put down 615 horsepower with the new mods!

Super clean low miles fox in for a new heater core and a/c evaporator.Not a fun job to do at home so let us take care of...
05/13/2026

Super clean low miles fox in for a new heater core and a/c evaporator.

Not a fun job to do at home so let us take care of it for you! One stop for parts and install!

Beautiful 67 mustang originally turned into an Eleanor in 2005 and was only driven 1,000 miles since.The fuel system was...
05/07/2026

Beautiful 67 mustang originally turned into an Eleanor in 2005 and was only driven 1,000 miles since.

The fuel system was completely trashed unfortunately from all the years of sitting, so all new fuel system components were installed along with new foam in the fuel cell rated for ethanol.

We also updated to electronics with a Holley terminator x system and brought this car back to life.

The final piece was a hydraulic clutch conversion to help make the car easier for the owner to drive, now it’s as good if not better then when it was fished back in 2005!

26 explorer st in for a  intercooler,  cold air intake and &loilseparatorco catch can set up.Once again topped of with a...
05/05/2026

26 explorer st in for a intercooler, cold air intake and &loilseparatorco catch can set up.

Once again topped of with a tune from the best

One stop shopping for all your performance needs, hit us up today!


Address

2019 Suite A Lucon Road
Schwenksville, PA
19473

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm

Telephone

+16105843195

Alerts

Be the first to know and let us send you an email when East Speed posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to East Speed:

Share

Category