Fabrication Station and Performance

Fabrication Station and Performance At Fabrication Station and Performance, we’re more than just an auto shop — we’re part of the community.

Our goal is to provide honest, reliable service you and your family can count on.

A little custom fabrication for this work truck! 🛻🔥We made several modifications to the truck bed to get it better suite...
08/21/2026

A little custom fabrication for this work truck! 🛻🔥

We made several modifications to the truck bed to get it better suited for the job:

🔧 Fabricated new bedsides
🔧 Fabricated custom ladder racks
🧑‍🏭 Welded reinforcement brackets to strengthen the bed supports
🧑‍🏭 Added welded D-rings to the bed and bedsides for additional tie-down points
👨‍🎨 Prepped and painted all the new steel
🛡️ Fluid Filmed underneath the dump body for added protection
⚙️ Finished it off with a good greasing

We love taking a truck and making it work better for what the customer actually needs. Another custom fabrication job out the door for 207Fence!

📞 207-608-2131

🎨 Got Kory in some painting action today!A quick spray and blend on this Silverado to get it looking fresh again. 👨‍🎨🛻✨ ...
08/11/2026

🎨 Got Kory in some painting action today!

A quick spray and blend on this Silverado to get it looking fresh again. 👨‍🎨🛻✨ Sometimes it just takes a little paint and a good blend to make all the difference!

Used Bridgestone Alenza A/S 275/50r22 tires with plenty of life left in them. Easily passes inspection. Asking $400Call ...
08/11/2026

Used Bridgestone Alenza A/S 275/50r22 tires with plenty of life left in them. Easily passes inspection. Asking $400

Call 📞 207-608-2131 or DM 📱 us!

Tinted Door Glass - fits a '55 T Bird. LH or RH. $60. Call 📞 207-608-2131 or DM 📱 us!
08/11/2026

Tinted Door Glass - fits a '55 T Bird. LH or RH. $60.

Call 📞 207-608-2131 or DM 📱 us!

Anyone in the market for a Curt Class 5, 2 inch Receiver Hitch? Trying to sell on here before sending back. $380.00 AND ...
08/11/2026

Anyone in the market for a Curt Class 5, 2 inch Receiver Hitch? Trying to sell on here before sending back. $380.00 AND we might know someone to install it!!

Call 📞207-608-2131 or DM 📱us!

OMG we just had the tiniest cutest little nugget visit us! Thank you Mason for bringing Lola in to see us 🤎
07/30/2026

OMG we just had the tiniest cutest little nugget visit us! Thank you Mason for bringing Lola in to see us 🤎

Chandler brought us his 2001 Camaro Z28 for some transmission work. We removed and replaced the transmission with a Trem...
07/27/2026

Chandler brought us his 2001 Camaro Z28 for some transmission work. We removed and replaced the transmission with a Tremec unit. Removed and replaced the transmission mount and torque arm bushings with polyurethane bushings due to wear in the factory bushings. Removed and replaced the transmission slip yoke, upgrading from a 27-spline to a 31-spline unit while in there we removed and replaced the clutch with an LS7-style clutch assembly. (I wish T-Tops were still an option!)

Need any transmission work 👨‍🔧? Give us a call 📞 207-608-2131

Cole's Denali got a fresh new stance with a 5" lift kit.Thinking about lifting your truck? Whether you're after a more a...
07/27/2026

Cole's Denali got a fresh new stance with a 5" lift kit.

Thinking about lifting your truck? Whether you're after a more aggressive look, extra ground clearance, or better off-road capability, we've got you covered.

📞 Give us a call at 207-608-2131 or stop by the shop 🛻 to schedule your appointment 📆

This past weekend, Jake spent some time in the paint booth making progress on the '65 Buick Riviera! 👨‍🎨🚗He started with...
07/27/2026

This past weekend, Jake spent some time in the paint booth making progress on the '65 Buick Riviera! 👨‍🎨🚗

He started with ☝️ coat of High Build Full Epoxy sealer, then followed it up with ✌️ coats of Evercoat Super Build to help level everything out and get the body laser straight before the next stage.

It's all in the prep—taking the time to do it right makes all the difference in the final finish. Stay tuned as this classic keeps coming together! 🔥

Today was a beautiful day to hit up a car show in New Hampshire. There were some beauty cars and some phenomenal paint j...
07/26/2026

Today was a beautiful day to hit up a car show in New Hampshire. There were some beauty cars and some phenomenal paint jobs. It’s always good to see other people’s creativity.

Address

42 Jagger Mill Road
Sanford, ME
04073

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 4:30pm

Website

Alerts

Be the first to know and let us send you an email when Fabrication Station and Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category