Backus Race Craft

Backus Race Craft Where Real Power Is Made. Squeezing more power out of everything from full size diesel trucks down to big turbo 4 cylinders.

Your one stop shop for all things performance.

CNCFab Stage 2 HPOP, HPX and stainless line upgrade, Full Force 180/30s, and a set of Motorcraft glow plugs to go in a 7...
12/18/2020

CNCFab Stage 2 HPOP, HPX and stainless line upgrade, Full Force 180/30s, and a set of Motorcraft glow plugs to go in a 7.3 Powerstroke. 😎

Also had to repair the butchered UVCH plugs while we were in there.

SS getting tucked in while we take care of a low rpm stumble and see if we can't give the DBW throttle some better respo...
07/11/2020

SS getting tucked in while we take care of a low rpm stumble and see if we can't give the DBW throttle some better response!

The latest project. See if we can tuck these CCWs static.
01/27/2020

The latest project. See if we can tuck these CCWs static.

This super clean Z06 came back to get it a little closer to the earth. Lowering bolts installed and maxed out. Rear fitm...
07/28/2019

This super clean Z06 came back to get it a little closer to the earth. Lowering bolts installed and maxed out. Rear fitment is perfect, front might need some convincing with coilovers to come down a bit more ;)

Had a little fun with a C5 Z06. After popping his valve cover gaskets, the owner wanted to have his CCV system properly ...
06/22/2019

Had a little fun with a C5 Z06. After popping his valve cover gaskets, the owner wanted to have his CCV system properly plumbed. Clean install and no more crank case pressure means a happy customer!

04/13/2019

Billet wheel install on a GTP38 Powerstroke turbo. KC Turbos kit includes S300 style turbine, 6x6 billet wheel, and 360* journal bearing kit. Runs like a champ!

I was really looking forward to getting the Focus to the track this season as we took out a couple fast V8 cars with it....
10/25/2018

I was really looking forward to getting the Focus to the track this season as we took out a couple fast V8 cars with it. It has been an extremely finicky car since we put the Top Speed kit on it, and eventually became plagued by the classic boost leak demon. Upon disassembly we found welds on the intake manifold had actually cracked, along with the welds on the exhaust manifold that we had previously fixed.

On to bigger and better things now though! Maybe we will get her back together for next season.

Made some progress on the Focus! Pushed the intake away from the engine, which finally resulted in IATs lower than ambie...
05/17/2018

Made some progress on the Focus! Pushed the intake away from the engine, which finally resulted in IATs lower than ambient. Got the N2MB Racing WOT Box hooked up as well as the TEIN USA, Inc. EDFC. Still need to dial in the two-step but No Lift Shift works as it should and has completely transformed the car.

Got this clean Mazdaspeed 3 set up on some BC coilovers. He was dying to get rid of the wheel gap from the soft stock su...
05/07/2018

Got this clean Mazdaspeed 3 set up on some BC coilovers. He was dying to get rid of the wheel gap from the soft stock suspension. Coming back once they settle to get the final adjustment and have some Massive Speed System camber and toe arms installed. Also plan on fixing the leaky downpipe gasket so he can get it tuned. Some other things in the works, should be a fun car when all said and done!

Stay tuned for more!

Well, after running into loads of fitment issues with the new turbo kit and intake manifold we got her running! Spending...
04/17/2018

Well, after running into loads of fitment issues with the new turbo kit and intake manifold we got her running! Spending some time tuning, looking like she's going to be a beast!

Yes those are 245s on stock fenders ;)

HUGE shootout to Hector and the crew at CFM Performance for getting a new throttle body overnighted to us here in Illino...
03/20/2018

HUGE shootout to Hector and the crew at CFM Performance for getting a new throttle body overnighted to us here in Illinois! Customer service is top notch and this throttle body is begging for the new turbo kit 😎

Gotta love Girl Scout cookies!Intake manifold for the Focus and a Walbro 450 stolen from the shop DSM that should supply...
03/09/2018

Gotta love Girl Scout cookies!

Intake manifold for the Focus and a Walbro 450 stolen from the shop DSM that should supply enough E85 for our Fuel Injector Clinic injectors.

Should be taking care of some legal things next week and becoming official! Wish us luck!

Address

Sandwich, IL
60548

Telephone

+16309991320

Website

Alerts

Be the first to know and let us send you an email when Backus Race Craft posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category