Skillins Hot Rods

Call Directions Contact the business

Skillins Hot Rods Small town hot rod shop that can do everything from Repairs to Full Custom Builds, Body & Paint Repa

A little after and before on Kevin’s C10, love the look of the OG seat cover, a few more test miles after we swapped in ...
09/23/2026

A little after and before on Kevin’s C10, love the look of the OG seat cover, a few more test miles after we swapped in a Strange 9 inch rear end and she will be ready to go back to Mississippi

A little drop and roll on my daughters ride
09/05/2026

A little drop and roll on my daughters ride

Robins 57 in for some maintenance, I never mind the opportunity to take this car for a ride, can’t believe it’s been 2 y...
07/10/2026

Robins 57 in for some maintenance, I never mind the opportunity to take this car for a ride, can’t believe it’s been 2 years already, still looks fresh and clean 🧼

I didn’t forget about the Bronco project, the passenger side went so well we decided to do the driver side 😩, went with ...
06/19/2026

I didn’t forget about the Bronco project, the passenger side went so well we decided to do the driver side 😩, went with the one piece bed sides looks a lot cleaner imo, just have to weld up the front sheet metal and we will be onto body work, and for those people that commented that we should have bought a new body I’m here to tell you that is not the answer all the A/M bodies not just the Bronco are not built with very good craftsmanship and tolerances you end up cutting up a new body trying to get panels to line up just not worth it in the end, ok rant over 😂

Time to blow out them cobwebs
05/02/2026

Time to blow out them cobwebs

Time to put some miles on this old farm truck now that we have the front end finished and the alignment done from , the...
04/24/2026

Time to put some miles on this old farm truck now that we have the front end finished and the alignment done from , they are my go to for alignments, powder coating, custom welding and of course all your diesel needs 😉

Can you do some metal work on my Bronco? Sure no problem 😬, just a typical Wednesday in the shop, down the 🐇 hole we go ...
04/15/2026

Can you do some metal work on my Bronco? Sure no problem 😬, just a typical Wednesday in the shop, down the 🐇 hole we go ☹️ Bronco life

We put this car together about 9 years ago for my brother and he has decided to let it go, let me know if you are intere...
03/21/2026

We put this car together about 9 years ago for my brother and he has decided to let it go, let me know if you are interested before I post it, probably one of the nicest 62 Impala crew cabs around, car started off as a rust free 58k original mile car that we painted and detailed the engine bay, straight slick paint, all jams painted, engine bay all painted, trim and chrome in great condition, interior original except the carpet that’s in great condition except for the front seat is thin, that is probably the worst thing on the car, power front disc brakes, 4 corner air ride, 18x10 rear wheels 10x8 fronts, retro sound radio, very reliable car runs like a sewing machine, 9 years and I don’t think there’s a chip or scratch on it, no disappointments SOLD

I just wanted to congratulate Robin on a second place finish in a highly competitive class at the world of wheels Chicag...
03/10/2026

I just wanted to congratulate Robin on a second place finish in a highly competitive class at the world of wheels Chicago this past weekend especially because the car still has a 1980s lacquer paint job, that’s impressive to me 💪 we finished this car about 2 years ago it’s rolling on a spec chassis with a LS3 dressed old school, 6 speed trans, mini tubbed with 315s out back wrapped around the 19 and 20 inch Billet Specialties wheels, the car was built to be driver friendly and reliable and think we achieved that 💪 #1957

02/20/2026

Burning some fuel in this old farm truck on fired up Friday, those gauges are killer we are using the RTX gauges and there electric fan controller as well so we can monitor that new 383

Address

17879 Frazier Road
Sandwich, IL
60548

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+16307428338

Website

Alerts

Be the first to know and let us send you an email when Skillins Hot Rods posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Skillins Hot Rods:

Shortcuts

Share

Category