Casale Design

Casale Design Exterior Panel Design Maker

S13 SILVIA OEM Front Lip Spoilers back in stock! Currently (5) lips in stock, currently offered at $399.99 plus tax and ...
03/14/2026

S13 SILVIA OEM Front Lip Spoilers back in stock!

Currently (5) lips in stock, currently offered at $399.99 plus tax and shipping. -- Local Pickup option also available!

FRP made in the USA, shipped or picked up from PA location.

After these 5 sell, I will be revising this product and they will be made in CA later on.

Super clean Civic Coupe with all sorts of mods looking super stealthy !! Supporting the 'cause with a rear Duckbill ! Q...
03/13/2026

Super clean Civic Coupe with all sorts of mods looking super stealthy !! Supporting the 'cause with a rear Duckbill ! Quite aggressive if you ask me!!

3 of the 5 mold sections RHS S13 FIXED HEADLIGHT taped together to get an idea of the finished product. I still need to ...
12/27/2025

3 of the 5 mold sections RHS S13 FIXED HEADLIGHT taped together to get an idea of the finished product. I still need to properly bond all 5 together after the holidays.

Yes, the bottom section has some air pockets/wrinkles, I had rushed a bit when laminating this section. 😅 You can ignore those errors!

But overall the sections align well and also the clear covers fit well onto the FRP housings. Next I need to open the LHS holds and prep them for making the first sample as well.

fixedheadlights aero aerodynamic 180sx 180sxtypex frp fiberglass ps13 rps13 socalschassis zilvia silvia superstreet proshopnoble shirtstuckedin

Happy Holidays to all! ❄ïļðŸŽ„🎁☃ïļâœĻI am pleased to say that production is finally starting on the Civic FC/FK 10th gen garnis...
12/25/2025

Happy Holidays to all! ❄ïļðŸŽ„🎁☃ïļâœĻ

I am pleased to say that production is finally starting on the Civic FC/FK 10th gen garnish!! Preorders will start early next year for a discounted rate.

Once the first production sample arrives, I will immediately test fit it and share photos :) !

The RHS molds for the S13 FIXED LIGHT housing are currently being tested for production. LHS molds need to be opened and...
12/18/2025

The RHS molds for the S13 FIXED LIGHT housing are currently being tested for production. LHS molds need to be opened and plug removed.

Due to my time constraint of traveling for the holidays, I was not able to bond these sections together just yet, but plan to do so in January. I pulled some laminated sections from their molds to check release, then trimmed and returned to their molds. Normally i'd trim half cured in the mold but this was just a test. Overall looking good!

There is a separate upper bracket mold to make a adjustable upper bracket that bolts to the housing, which still needs to be laminated.

As the first sample FRP S13 FIXED headlight housings will be laminated by myself in December, here are some renderings s...
11/23/2025

As the first sample FRP S13 FIXED headlight housings will be laminated by myself in December, here are some renderings showing some visuals of a suggested finished look. Of course there are many different ways these can be painted/ clear lenses colored etc.

I will make some night renderings with the lights on as well to see how the projectors look with the shrouds w/ 2 lights versus 4 lights turned on.

This product will be by far my most complex, but I hope all my hard work going into this has paid off!

Rain rain go away, please come back later so I can drive a S13 that leaks lol. Jokes aside, I did drive this in the rai...
11/21/2025

Rain rain go away, please come back later so I can drive a S13 that leaks lol.

Jokes aside, I did drive this in the rain on the 405, it wasn't that fun. Especially where you can't even see any reflectors on the lanes!! Not cool at all!!

#2017

Black Friday discount now open for use! 20% off all available products.USE CODE: BLACKFRIDAY25 Note: some parts are in s...
11/21/2025

Black Friday discount now open for use!

20% off all available products.

USE CODE: BLACKFRIDAY25

Note: some parts are in stock, some parts are made to order. If you have a concern, please ask before ordering!

Happy Shopping!

#2025

The last part to these darn S13 Fixed Light molds ðŸ˜Đ... These small multi-part molds are always quite demanding in the de...
11/20/2025

The last part to these darn S13 Fixed Light molds ðŸ˜Đ... These small multi-part molds are always quite demanding in the details. But hopefully before I can even think, i'll be polishing these up to make the first set of headlight housings 😁😁😎!!

Another rendering showing the Civic FK7/ FC garnishes in its finished Carbon Fiber finish from a top view angle! ...
11/16/2025

Another rendering showing the Civic FK7/ FC garnishes in its finished Carbon Fiber finish from a top view angle!

Civic Garnish Prototype test fit session #2 ... (SI Sensing test fit is next!). This first test fit was on a Si Civic S...
11/13/2025

Civic Garnish Prototype test fit session #2 ... (SI Sensing test fit is next!). This first test fit was on a Si Civic Sedan without sensing (thanks to Kris_takes_photos).

Both garnishes were fitted this time around. Overall the fit looks pretty good. Some areas on the lower/center part of the garnish can be improved- yet I have found already that fitting these on a bumper off the car is easier to do- at least with the 3D Printed Prototypes.

Enjoy the photos! Try and imagine these being finished in glossy Carbon Fiber!

Showing some love to 's FK8 Type R! Such a uniquely put together car with a variety of parts. Many details inside and ...
11/12/2025

Showing some love to 's FK8 Type R! Such a uniquely put together car with a variety of parts. Many details inside and out that catch your eye, yet nothing over the top. They all flow nicely together to make a very clean build!

The paint alone looks like something OEM optional, if Honda ever offered such a thing!

All the Carbon details have a tinted clear to them to separate them from other builds! From far looks glossy black but up close you see the carbon weaves 👌ðŸŧ👏ðŸŧ!

Very well done!! 👏ðŸŧ👏ðŸŧ

Address

San Pedro, CA
90732

Website

Alerts

Be the first to know and let us send you an email when Casale Design posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Casale Design:

Shortcuts

Share

Category