Performance Fabrication

Performance Fabrication High Quality Work With Perfect Results Performance Fabrication was started in 1981 with a passion for the mechanical and fabrication world.

A desire to get the most out of everything, the freedom to be creative, and the drive to do the best job possible. Whatever your needs are; parts, advice, maintenance, repair, or a complete build, we have the knowledge and skills to turn your dreams into reality. With the mindset that if you are going to do it, do it right, and the attitude to be the best at what we do you understand our mission statement "High Quality Work With Perfect Results"

09/10/2025

Great day with the Henry J at

Full stainless exhaust system for this REALLY clean blazer. SPD mandrel bends mufflers and resonators were used
07/10/2025

Full stainless exhaust system for this REALLY clean blazer. SPD mandrel bends mufflers and resonators were used

Customer brought in a cardboard example of a removable hood scoop he wanted us to make for his challenger. Fun little pr...
06/19/2025

Customer brought in a cardboard example of a removable hood scoop he wanted us to make for his challenger. Fun little project on the pullmax and planishing hammer. Swipe ➡️ to see the process

Firewall for the Maverick with a removable access panel for the Nelson alien intake fuel plumbing
05/16/2025

Firewall for the Maverick with a removable access panel for the Nelson alien intake fuel plumbing

Wheel tubs for the Maverick. Pretty stoked on how these came out!
03/19/2025

Wheel tubs for the Maverick. Pretty stoked on how these came out!

Maverick Monday part 4 - Rear SuspensionOur only instruction was to keep the stock interior and backseat as well as the ...
02/24/2025

Maverick Monday part 4 - Rear Suspension

Our only instruction was to keep the stock interior and backseat as well as the the supplied 17” wheel. Played with a few different tire options when designing the 4 link brackets that would cater to both a radial and a slick

Maverick chassis and cage progress
01/22/2025

Maverick chassis and cage progress

Maverick Monday part 2! Once the tedious but critical process of getting the body square, centered, and anchored to the ...
12/30/2024

Maverick Monday part 2! Once the tedious but critical process of getting the body square, centered, and anchored to the chassis table is complete the construction of the cage and chassis can begin. 2x2 .120 square tube fits perfectly between the stock front frame rails and will lay the groundwork for the floor structure.

Maverick Monday! Excited to share this project with everyone. Going to be a killer street car when done ...
12/02/2024

Maverick Monday! Excited to share this project with everyone. Going to be a killer street car when done

Long overdue update on Camaro. The car is temporarily back from the body shop to get the plumbed wired and driving bef...
08/08/2024

Long overdue update on Camaro. The car is temporarily back from the body shop to get the plumbed wired and driving before we blow it all apart for the final time and then off to paint

31 Ford with a flathead in for a mild steel exhaust system with cutouts. Sweet ride
07/19/2024

31 Ford with a flathead in for a mild steel exhaust system with cutouts. Sweet ride

Porsche exhaust job. Customer wanted to remove the existing setup, keep the cats and use a GT3 muffler
07/11/2024

Porsche exhaust job. Customer wanted to remove the existing setup, keep the cats and use a GT3 muffler

Address

1701 Industrial Road
San Carlos, CA
94070

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Performance Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Performance Fabrication:

Shortcuts

Share

Category