Nasco Automotive Machine

03/02/2021

1979 Mercedes 300TD in for rebuild with new valve guides and a full valve job. Re-sealed injector pre-chambers along with media blast and resurface.

03/02/2021

International BD-154 after a valve job complete with hardened exhaust seat inserts, guides machined for a positive seal, finished with new valves and springs

01/22/2021

1958 International c123 tractor head repaired with new guides and hardened seat inserts

01/22/2021

1950's Wi***es 134Ci F head leaving the shop after a full restoration including new valve guides, hardened seat inserts and a 3 angle valve job.

09/12/2020

07/10/2020

Finished up this Mercedes 280SE head we replaced all of the valve guides, machined the original valves and seats. Then media blasted the head and machined the head gasket surface

02/28/2020

This was a project we finished up a while back, it is a Volkswagen VR6 rebuilt with all new bronze guides and Supertech valves. We did a multi-angle valve job on our Rottler SG7 machine and assembled the head with new Supertech springs. The block was rebuilt as well and bored over for larger pistons

02/25/2020

This is a 1953 Wi***es CJ3A. We did a complete overhaul on this engine with new pistons, valves, guides, seats.

02/20/2020

Finished up a quick valve job on these Caterpillar 3416 heads. The Cat 3416 is a 27 Liter V-12 engine.

02/12/2020

This 1953 Studebaker 259 is leaving the shop after a full overhaul. We really enjoy restoration projects like this one.

11/22/2019

We cleaned up a set of mid 50s Spitfire Chrysler heads for a customer. These just needed to be crack checked with Magnaflux and to have the head surface machined

11/22/2019

We have done a few sets of these 2 stroke Detroit Diesel heads recently, all new valves and guides. New injector cups installed as well machined and reemed to size