Malli Motorworks

Malli Motorworks If you can dream it, we can build it.

Malli Motorworks is a one-stop-shop providing professional-grade engine swaps, performance upgrades, restoration and customization that brings your car new life.

BNR32 rear left pinch weld quick repairs.Rusted, folded, typical. Came out nicely. And each layer fully protected.Any qu...
05/10/2026

BNR32 rear left pinch weld quick repairs.

Rusted, folded, typical. Came out nicely. And each layer fully protected.

Any questions or inquiries please reach out!

DM or [email protected]

BNR32 Rear right pinch quick weld repairs Not only was it folded and rusted but pushed up about 3/4 inch. You might be a...
05/10/2026

BNR32 Rear right pinch quick weld repairs

Not only was it folded and rusted but pushed up about 3/4 inch. You might be able to see the crease.

Complete peeled it all back and fully rebuilt, think it came out sweet. Tried to remember to take pics of every stage. But you get the idea. Couple oe pieces were saved after blasting. But few were remade.

Feel free to reach out with any questions or inquiries 🤝
Dm or [email protected]

Right front rocker rebuild on the Nismo 32.
05/09/2026

Right front rocker rebuild on the Nismo 32.

32 Nismo front right Pinch weld condition:Not good mate. Was folded over & nasty rust hiding. Started just by roughly be...
05/09/2026

32 Nismo front right Pinch weld condition:

Not good mate.

Was folded over & nasty rust hiding.

Started just by roughly bending back in shape. Then start dissecting each layer.

You won’t want to miss the rebuild process. Came out awesome.

More trunk/boot repairs on the Nismo 32. Rebuilt all flanges that mate to rear panel, rebuild fuel tank support plate, a...
05/08/2026

More trunk/boot repairs on the Nismo 32.

Rebuilt all flanges that mate to rear panel, rebuild fuel tank support plate, and rebuilt part of the floor, twice actually, but only because I wasn’t fully satisfied with my first attempt, metal can be a bitch 😂

Forgot to take pictures of everything but you get the idea. Coming out sweet.

Rebuilding the flanges on the quarter panel for the fresh new OEM rear taillight panel pinned in place. Cut out all the ...
05/08/2026

Rebuilding the flanges on the quarter panel for the fresh new OEM rear taillight panel pinned in place.

Cut out all the junk. Weld in fresh steel 🤌🏽

The taillights have never installed so easily 😂👌🏽

Nismo rear panel was replaced in the past by Stevie wonder and was also rusted out completely. A really poor job. Lots o...
05/08/2026

Nismo rear panel was replaced in the past by Stevie wonder and was also rusted out completely. A really poor job. Lots of work needed to get it back right.

This car was hiding lots of secrets. Stay tuned for much more. Been knocking out the metal work on this, and it’s coming out sweet.

04/02/2026

Rust is, to a minimum?
R34 GT-R just about stripped & receiving the M-Spec treatment with a quick underside job.

What do you think of the current state?🤔

This one will be a massive transformation. Stay tuned!

03/30/2026

Quick little test drive before this 34 goes under the knife for some work. Really looking forward to this one. Will come out sweet. Stay tuned 🤌🏽

Again massive thanks to Frank for sending this all the way down to Texas from New York. Can’t wait to blow you away with this one mate.

03/28/2026

The Nismo is on the rotisserie and ready for that slow roast to perfection…🤌🏽

This is the same rotisserie I built for my gtr 5 years ago and still holding up great. Haven’t made any mods to it. Just working awesome.

03/27/2026

GT-R restore #003 all stripped and ready for rotisserie 😎

Address

121 Hunters Pass
Rochester, NY
78669

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+15855455540

Alerts

Be the first to know and let us send you an email when Malli Motorworks posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Malli Motorworks:

Share