Feeneys Auto LLC

Call Directions Contact the business

Feeneys Auto LLC Complete automotive repair for European, Asian and domestic vehicles.

New York State Inspections, Diagnostics, engine & transmission repair, software updates, module flashing, welding, tires, brakes, suspension, sandblasting, trailer repair

Another DIESEL Volkswagen injection pump rebuild!!
11/09/2024

Another DIESEL Volkswagen injection pump rebuild!!

Transfer case shift motor (encoder motor) position sensor replacement.
10/26/2024

Transfer case shift motor (encoder motor) position sensor replacement.

Here’s a Volkswagen transmission a customer had “REBUILT”. The shop that did the work did a decent job on everything oth...
07/11/2024

Here’s a Volkswagen transmission a customer had “REBUILT”. The shop that did the work did a decent job on everything other than fixing the issue of why it failed in the first place, the valve body! If you look at the second picture you can see the wear in the bore which causes 3rd gear to slip which is why the 3rd gear clutches are burnt (1st pic). One of the most reliable transmissions imo, 99% of the time they only fail because of the valve body.

Sorry we haven’t been on social media in a long time. Here’s another Ultrasonic cleaning rant! Here is a 10 year old car...
06/13/2024

Sorry we haven’t been on social media in a long time. Here’s another Ultrasonic cleaning rant! Here is a 10 year old carburetor that now looks like new because it was ultrasonic cleaned! But it’s not even that it looks new it’s that the ultrasonic cleaning fixed the issue! This also works for many other things! Hit us up for all ur needs!!!! 585-617-4284

Volkswagen 01M automatic transmission valve body rebuild!
09/07/2023

Volkswagen 01M automatic transmission valve body rebuild!

06/12/2023

Just so everyone knows the phones have been down just got them back up

Here is a project I have been doing at home it’s my Girlfriends GMC Acadia. The engine was burning oil because the previ...
04/22/2023

Here is a project I have been doing at home it’s my Girlfriends GMC Acadia. The engine was burning oil because the previous owner did not change the oil enough so sludge made the oil control rings on the pistons stick causing it to burn oil so I rebuilt the engine, new pistons, one connecting rod replaced, rings, main and rod bearings, oil pump, all parts were cleaned, cylinders honed, crankshaft was polished, main & rod & head bolts replaced, every gasket and seal replaced, valve job, power steering pump (noisy), alternator, starter, heater core hose assembly, water pump (wasn’t leaking but with 160k miles it’s time), power steering return lines, spark plugs, brake master cylinder was leaking slightly into the booster so I replaced the master cylinder, fuel line was rotted so I replaced it with copper nickel line so it can’t rot again, crankshaft position sensor (it has 160k miles on it and a pain in the butt to replace so while the engine was apart I replaced it). The transmission failed that was the reason for taking the engine and transmission out in the first place so the transmission was rebuilt with new torque converter, new transmission cooler lines, new transfercase seals, new full synthetic fluid for the transfercase and the rear differential and obviously all other fluids are new. We don’t typically rebuild engines very often because the costs are typically much higher then purchasing a new, remanufactured or used engines and it takes a lot of time to do them but we do them from time to time. Here’s to another 160,000 miles! WE DO IT ALL FROM BIG TO SMALL!! 585-617-4284

Little platform I made for engine stand. I’m surprised no companys makes something like this. Now I just gotta make 2 mo...
04/09/2023

Little platform I made for engine stand. I’m surprised no companys makes something like this. Now I just gotta make 2 more for my other stands!

Walnut blasting, super fast way to clean and doesn’t take off any metal!
04/08/2023

Walnut blasting, super fast way to clean and doesn’t take off any metal!

Here are some 3rd and 4th gear clutches from an automatic transmission out of a 2009 gmc sierra pickup truck. It’s very ...
03/26/2023

Here are some 3rd and 4th gear clutches from an automatic transmission out of a 2009 gmc sierra pickup truck. It’s very common for the 3rd & 4th gear clutches to burn up in these transmissions and we install a shift improver kit when rebuilding the transmission that actually helps to avoid these clutches from burning up and also corrects/updates a handful of issues with these transmissions. These clutches actually burned up because the cooler lines started leaking so it ran low on fluid causing the clutches to slip and burn up. So we replaced all 3 transmission lines, the aux transmission cooler and a full rebuild with new torque converter! This truck is ready for another 14 years of service!!

Address

4992 W Ridge Road, Spencerport
Rochester, NY
14559

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+15856174284

Website

Alerts

Be the first to know and let us send you an email when Feeneys Auto LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Feeneys Auto LLC:

Shortcuts

Share

Category