Big E’s Powder Coating

04/16/2026

03/21/2026

Great to meet one of my fans. Metal fan in illusion Violet and illusion pink

03/21/2026

Can I vent to you guys? HVAC vent in illusion red and with ultra blue sparkle. Awesome depth with the blue flake.

03/11/2026

All gas, no brakes! brake pedal in Astetic Red, PacCar Semi-gloss, and Clear Super Flow SD. Vacuum kit courtesy of

03/05/2026

Try not to be so DIFFicult! Customer initially wanted Pearl Frost with Nuke Orange letters. We attempted this by doing Orange, clear, Paccar black, then Pearl frost. Looked perfect all the way through cure cycle, only to turns beautiful shade of peach when it cooled. So we had to scrap and reverse. But the final product turned out clean.

02/13/2026

Romance is in the air, just in time for Valentine’s Day! A customer is treating his wife right with Passion Pink Can Am parts! Flex Primer, Super Flow SD Clear from Coatings and Passion Pink from Powders

02/06/2026

This was a lot to handle (no chromo). Latch for a boat refrigerator no longer in manufacture. I started by drilling the rivets out to allow for disassembly. The old flaking chrome was blasted off down to a clean substrate, following by several hours in the oven at 500F to off gas. Off gas forgiving primer laid to prevent corrosion from sea spray, and to create a smooth profile. Next a layer of Super Chrome Plus was applied and fully cured, to create a bright reflective silver. Finally, Black Chrome I was laid to give a stainless steel look. Stainless steel Chicago bolt fasteners with red thread lock were used to replace the rivets.

02/05/2026

This magical powder is back! Flippin’ Phoenix from Coatings over Obsidian Black from Powders. Confetti style giant flake that color shifts red green and gold.

01/15/2026

Had a customer wait almost a month for his brake cables to arrive, only to discover they sent nickel finish instead of black. With a ride coming up, we had to act fast. Thanks to H-Series Graphite Black, we are able to provide a thin, very durable black coating in place, without damaging the cables. Using a 12:1 ratio color to activator, we can get a more satin finish that looks factory original.

01/15/2026

Had a customer wait almost a month for his brake cables to arrive, only to discover they sent nickel finish instead of black. With a ride coming up, we had to act fast. Thanks to H-Series Graphite Black, we are able to provide a thin, very durable black coating in place, without damaging the cables. Using a 12:1 ratio color to activator, we can get a more satin finish that looks factory original.

12/07/2025

FOLKS WE LOVE A FINISH PRODUCT