Millers automotive

Millers automotive We are a family run and operated business for over 25 years!

It’s been a busy day here at Miller’s Automotive. Klay just finished an oil change on a 2024 Kia Soul after Eddie inspec...
05/28/2026

It’s been a busy day here at Miller’s Automotive. Klay just finished an oil change on a 2024 Kia Soul after Eddie inspected the horn. Klay is now working on removing the timing belt on a 2007 Chrysler PT Cruiser. EJ was completing a diagnosis on a 2018 Hyundai Elantra and is now working on replacing the fuel injector on a 2014 Jeep Grand Cherokee. Darnell did a visual inspection on a 2006 Chevy Equinox and is now working on replacing the transmission in a 2018 Chevy Silverado. We want to thank our technicians for their continued hard work in providing quality service to our customers. We as always want to thank our customers for trusting us with their vehicle repairs!

A few new projects are being started on this morning. Klay is working on replacing the evaporator and expansion valve on...
05/27/2026

A few new projects are being started on this morning. Klay is working on replacing the evaporator and expansion valve on a 2006 Honda Accord. Ej is working on swapping an engine in a 2009 Pontiac G3. Eddie is working on finalizing repairs on a 2016 Ford Transit and Darnell is working on replacing a starter on a 2012 Dodge Grand Caravan. It’s a busy hump day here at Miller’s Automotive. We’re hoping for decent weather in case any more repairs need to be completed outside.

We were closed yesterday in observance of Memorial Day but we are back open and in full swing this morning. Klay is star...
05/26/2026

We were closed yesterday in observance of Memorial Day but we are back open and in full swing this morning. Klay is starting the morning off by doing a list of repairs to a 2006 Honda Crv including replacing the a/c condenser fan. Ej is working on finishing swapping parts to the new motor on a 2013 Nissan Pathfinder. We have a new member of our team Darnell he started with us last week and he is working on replacing the rear main and oil pan gasket on a 2017 Nissan Murano he had it tore apart Friday and is working on swapping the bad parts now before working on putting it back together. We hope everyone had a safe Memorial Day!

We are nearing the end of the week with a considerable workload to address today and tomorrow. Currently, Klay is instal...
05/14/2026

We are nearing the end of the week with a considerable workload to address today and tomorrow. Currently, Klay is installing an air conditioning compressor on a 2013 Hyundai Elantra, having faced challenges in finding a reliable used part for this particular model. Following the completion of this task, he will move on to replace the water pump and timing cover of a 1997 Mercury Mountaineer. In other areas, Eddie is busy replacing the rear driveshaft of a 2017 Jeep Wrangler, and Ej is working on identifying the cause of a misfire in a 2016 Ford Explorer, prior to commencing work on replacing a torque converter in a 2019 GMC Terrain. With our schedule fully booked and additional appointments lined up, we are grateful for the trust our customers have placed in us and assure them of our best efforts despite the limited techs we have. We appreciate everyone's patience and wish a great Thursday.

Our technicians are currently occupied with various tasks. EJ is performing a front end kit swap on a 2005 Dodge Ram 150...
05/13/2026

Our technicians are currently occupied with various tasks. EJ is performing a front end kit swap on a 2005 Dodge Ram 1500. Klay is replacing both front CV axles, cleaning the tracks on the sliding doors, and conducting a tune-up on a 2006 Honda Odyssey. We hope you are all having a productive Wednesday.

The day's end projects are being completed. Eddie is wrapping up repairs on a 1997 Chevy S10. Ej is performing a motor s...
05/04/2026

The day's end projects are being completed. Eddie is wrapping up repairs on a 1997 Chevy S10. Ej is performing a motor swap on a 2018 Jeep Grand Cherokee. Klay is managing two projects: hose replacements on a 1996 Ford Aerostar van and front brake pad, rotor, and hub replacements on a 2006 Chevy Colorado. The last picture is of the driver's side post-removal.

Our parking lot is currently in order as we near the end of business hours. We truly value the tireless efforts of our t...
04/30/2026

Our parking lot is currently in order as we near the end of business hours. We truly value the tireless efforts of our technicians, who work diligently to complete vehicle services promptly without compromising customer safety.

Our parking lot this cloudy Thursday morning. This is pretty clear compared to usual. We hope everyone has a happy Thurs...
04/30/2026

Our parking lot this cloudy Thursday morning. This is pretty clear compared to usual. We hope everyone has a happy Thursday!

Our workshop is bustling with activity. Eddie is engaged in removing the cylinder head of a 2013 Dodge Avenger. Ej is me...
04/28/2026

Our workshop is bustling with activity. Eddie is engaged in removing the cylinder head of a 2013 Dodge Avenger. Ej is meticulously working on removing the front differential of a 2019 Dodge Charger. Klay is in the final stages of replacing the motor in a 2016 Dodge Grand Caravan. We are striving to complete the backlog of work to enhance our service to customers. Your patience and understanding are appreciated as we navigate the demands of our current workload with our team of three technicians. We wish you a good Tuesday.

The techs have been busy today! These are the more notable jobs they are working on. Ej is working on replacing the tran...
04/24/2026

The techs have been busy today! These are the more notable jobs they are working on. Ej is working on replacing the transmission and rear main on a 2002 Chevy Silverado while Klay is working on an engine replacement on on 2016 Dodge Grand Caravan.

A significant distinction is apparent. Verify that you are checking the cabin air filter, commonly found behind the glov...
04/24/2026

A significant distinction is apparent. Verify that you are checking the cabin air filter, commonly found behind the glove box, which facilitates airflow within your car.

Address

706 Harris Avenue
Raeford, NC
28376

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+19108752176

Website

Alerts

Be the first to know and let us send you an email when Millers automotive posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Millers automotive:

Shortcuts

Share

Category