Blain Brothers Racing

Directions Website

Blain Brothers Racing Full Service Racecar Fabrication Shop and Parts Manufacturer/Supplier located in Port Huron, MI

79-04 mustang tube front ends We have now added a tube front option with no wrap around front bumper bar. We have had re...
10/19/2026

79-04 mustang tube front ends

We have now added a tube front option with no wrap around front bumper bar. We have had requests to do it with out them so we went ahead and modified out fixture so that we could make this option available.

Check out many of the other products we are coming out with daily on our website also.

https://blainbrothersracingllc.com/shop/ols/products/79-93-mustang-tube-front-end

We have had many people ask on a regular basis. So we came up with a couple different style brake line kits for cars or ...
10/18/2026

We have had many people ask on a regular basis. So we came up with a couple different style brake line kits for cars or trucks.

Stainless with 3an weld on tabs or bolt on tabs
Steel line with 3an weld on tabs or bolt on tabs

Or
Stainless line 3/16 flare with weld/ bolt on tabs
Steel line 3/16 flare with weld/ bolt on tabs

These kits can be bought directly off our site.

https://blainbrothersracingllc.com/shop/ols/products/complete-car-brake-line-kit

Chromoly Front Travel Limiter Kits Limit front end travel for drag race applications. Install to lower control arm and b...
10/18/2026

Chromoly Front Travel Limiter Kits

Limit front end travel for drag race applications. Install to lower control arm and body to limit front control arm travel.

– Chromoly tubing and tube ends fully tig welded
– High strength Chromoly rod ends
– 3/8″ adjustments
– Quick pins
-Nickel Plated to prevent rusting and to give the limiters a nice clean look
-Short style Compressed length 10" fully extended 14.5" with heim joints all the way in on both ends. With heim joints out 1/2" it is 11" Compressed and 15.5" fully extended
-Long Style Compressed length 11.625" fully extended 17.5" with heim joints all the way in on both ends. With heim joints out 1/2" it is 12.625" Compressed and 18.5" fully extended

Optional
- 8- 1/8" tabs to weld to a arm and chassis
-All necessary Grade 8 3/8 bolts nuts and washers

https://blainbrothersracingllc.com/shop/ols/products/front-travel-limiter-kit-chromoly

79-93 mustang reverse master cylinderThis kit is a bolt in unit featuring a Wilwood pedal assembly and Wilwood master cy...
10/17/2026

79-93 mustang reverse master cylinder

This kit is a bolt in unit featuring a Wilwood pedal assembly and Wilwood master cylinders. This kit comes set up with the proper pedal ratio. and the pedal is also adjustable to different driver heights. The tie rod bar can also to be to help proportion brakes front to back.

The master cylinders (1 front 1 rear) come with reservoirs that can either mount on top of the master cylinder or be remote mounted.
This kit bolts into the factory 4 holes in the firewall and requires no other drilling or modifications to the firewall. On the outside is a Blain brothers billet block off plate

You will have to Modify your brake lines or replace your brake lines the factory lines will not bolt right up.

https://blainbrothersracingllc.com/shop/ols/products/79-93-mustang-reverse-master-cylinder

DIY Welding Trunk mounted vent tank These tanks are designed for cars running alcohol and forced induction. This tank ca...
10/14/2026

DIY Welding Trunk mounted vent tank

These tanks are designed for cars running alcohol and forced induction. This tank can hold up to 5 gallons. Tank is baffled to help prevent sloshing and blow by to exit the stack. Tank measures 10"w x11"L x10"T

Tank is offered with 3 options of inlets:
12an
16an
1-1/4 tube For 1-1/4" blow down hose

Tanks come with our billet mounts for 3/8 bolts for ease of welding and mounting or our 3/8 recessed weld on bungs

Tank comes with a 8 an fitting welded on the back. (Unwelded tank comes with a loose fitting to mount where it works best) so that you can cap it or you can plumb line to the outside of the car to drain it.

Stack is 2" diameter and 20"long That way it can be trimmed to fit out the trunk lid

Tank can be bought welded or Unwelded, Unwelded tank is tabbed for easy assembly

****** welded tank shown is not the same dimensions it was a custom tank done in house and shows the recessed weld in bungs for mounting*******

https://blainbrothersracingllc.com/shop/ols/products/large-trunk-mounted-ventpuke-tank

Address

3763 Lapeer Road, Unit B
Port Huron, MI
48060

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Blain Brothers Racing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category