Suttles Customs

Suttles Customs Brian Suttles
Classic Car Inspections & Restorations

Here is a visual of the rusted out floor pan repair on yesterday’s Mustang. Both sides were about equally as bad. Luckil...
03/31/2026

Here is a visual of the rusted out floor pan repair on yesterday’s Mustang. Both sides were about equally as bad. Luckily the rust was just in the pans themselves and had not worked its way into the subframes or rockers yet. By the time we got everything striped out, the floors were more fiberglass than metal. Now they are both solid and welded in. We also added some Hushmat to add some sound and heat control.

This 1968 Mustang started off as a pre-purchase inspection for a customer. There were some rust issues found as well as ...
03/30/2026

This 1968 Mustang started off as a pre-purchase inspection for a customer. There were some rust issues found as well as a few inops. The customer decided to buy the car and hired us to take care of the floors, torque box, fix turn signals and reverse lights, and add headers to the exhaust. We also did an oil change and a fresh set of BFG tires all around.

It's hard not to smile when you get behind the wheel of a big block C2. This '66 convertible had a well appointed 454 wi...
03/26/2026

It's hard not to smile when you get behind the wheel of a big block C2. This '66 convertible had a well appointed 454 with 4 speed manual transmission. The stinger hood, side pipe exhaust, and knock off turbine wheels really completed the period look and feel.

It was almost hard to believe that someone built this '47 Ford with an actual Ford powertrain. This sedan had a nice 351...
03/25/2026

It was almost hard to believe that someone built this '47 Ford with an actual Ford powertrain. This sedan had a nice 351 V8 with an automatic transmission and Ford 9" differential. It is an older build, but still presented well. There were some small items that needed addressing but this car was a cool cruiser. We hope the new owner enjoys it!

We recently inspected this long-bed square body Chevy—overall, a solid driver-quality truck. Not pristine, but far from ...
03/17/2026

We recently inspected this long-bed square body Chevy—overall, a solid driver-quality truck. Not pristine, but far from a project piece. It had a few typical issues you’d expect with an older truck, nothing out of the ordinary. It’s always a good idea to have a vehicle inspected before buying so you know exactly what you’re getting into.

This 1968 Mustang has a great look and strong powertrain. It ran and drove very well and was a fun little car. Unfortuna...
03/10/2026

This 1968 Mustang has a great look and strong powertrain. It ran and drove very well and was a fun little car. Unfortunately, upon inspection of the undercarriage, there were some issues that our customer was not prepared to take on. There were several patches in the floor pans and active rust issues in the rear subframes.

Another big project in the books. This 1985 K5 Blazer received a new driver side door and quarter panel. Then went with ...
03/09/2026

Another big project in the books. This 1985 K5 Blazer received a new driver side door and quarter panel. Then went with a classic and tough look: black paint, an all new black interior, and bedlined hardtop. We added all new emblems, grille, and moldings. There were also some mechanical repairs and upgrades performed. We love seeing the finished product on such big jobs.

This 1979 Camaro Z28 was an inspection (including compression check) for an international client and was in fantastic ov...
02/25/2026

This 1979 Camaro Z28 was an inspection (including compression check) for an international client and was in fantastic overall condition. This car looked highly original but did have an upgraded and well built engine. The interior was like a time capsule with everything original and in excellent condition.

We recently inspected and performed some work on this 1966 Chevrolet C10. During the inspection, we found that building ...
02/24/2026

We recently inspected and performed some work on this 1966 Chevrolet C10. During the inspection, we found that building lumber had been used as the body lift. We replaced all of the wood with a proper body lift, wired in gauge lights, and performed some maintenance and other misc items. This truck definitely went to the new owner better than when he bought it.

This 1967 Pontiac GTO started as an inspection. This car was very solid with professionally done quarters and full floor...
02/23/2026

This 1967 Pontiac GTO started as an inspection. This car was very solid with professionally done quarters and full floor pan. The new owner hired us to install and paint a correct hood tach. We also performed some maintenance, installed 3 gauge cluster, and a power antenna. We hope the owner will enjoy his beautiful GOAT!

Address

Piedmont, AL

Website

Alerts

Be the first to know and let us send you an email when Suttles Customs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Suttles Customs:

Shortcuts

Share

Category