East Coast Woodies

East Coast Woodies East Coast Woodies

best compliment. "Jeff, i just finished driver side, just a little sanding on bottom and it fit perfectly"need structura...
01/12/2026

best compliment.


"Jeff, i just finished driver side, just a little sanding on bottom and it fit perfectly"

need structural body wood?

reach out at Www.eastcoastwoodies.com

Sadly, I don't always get the opportunity to see the final installation of my parts. Thankfully, my customer shared this...
01/10/2026

Sadly, I don't always get the opportunity to see the final installation of my parts. Thankfully, my customer shared this photo with me. Since the pattern provided was incomplete, I made several areas slightly oversized, which helped ensure that the installer could fit the part and address 90 years of use, abuse and repair.

NEW reproduction rear fender guard / gravel shield for Ford and Mercury Wagon finally available! working with a local ve...
07/10/2025

NEW reproduction rear fender guard / gravel shield for Ford and Mercury Wagon finally available!

working with a local vendor to 3d print these in small quantities!

These are NOT rubber covers, they are not vulcanized rubber. These are faithfully reverse engineerd and 3D printed units that fit accurately to the contours of the Ford and Mercury fender.
Printed in study A.B.S. plastic (same material your new car bumpers are made of). Likely more durable than orignals. Reverse engineered for cars that have original fenders OR cars with NOS fenders (that have yet to be drilled)
The reverse side features "studs" that are printed in place so that they can be installed on existing cars.
Once again these are NOT covers, these are complete units ready to install on your ford or mercury wagon.
contact for availability

"reverse engineering items of historic significance." Phone dump. Ironically a significant amount of metalwork is concea...
02/13/2025

"reverse engineering items of historic significance."

Phone dump. Ironically a significant amount of metalwork is concealed within the woodwork.

Or.. random ferrous bits I make.

Driver rear fender for 1938,  1939 and 1940 ford.wagon available now Inquire
10/19/2024

Driver rear fender for 1938,
1939 and 1940 ford.wagon available now

Inquire

09/12/2024

Buick project:

This is the first step in creating the d pillar (rear corner post). For a 1953 buick.

3d scan by my engineer Tom, programming setup, and machine work all in house.

The finished product will require cnc and manual machine technology.

Step 1 shape the billett

Need woodwork?

See www.eastcoastwoodies.com

I

The 51 Ford woodie project required new windlace "grippers" ( these go over the door to hold the wind lace and headliner...
09/11/2024

The 51 Ford woodie project required new windlace "grippers" ( these go over the door to hold the wind lace and headliner in place.)

My friend George was good enough to loan his part as a pattern. A few hours of reverse engineering and with luck a formerly unavailable part.come back to life.

Need these for your 49 50 or 51 ford? Send a message, these will be made to order, and lead times may vary.

When you can't find the correct part, you make the correct part..My friend and neighbor george was missing this seat bra...
09/03/2024

When you can't find the correct part, you make the correct part..

My friend and neighbor george was missing this seat bracket.

Fortunately the 51 country squire project had the same part.

I was able to make copy and help get Georges.car a little closer to the finish line.

New project in the shop. Took my youngest daughter on this adventure, somehow the truck had to stop for ice cream on the...
09/01/2024

New project in the shop. Took my youngest daughter on this adventure, somehow the truck had to stop for ice cream on the way back.

A few favorites from the Gilmore "Red Barns Spectacular" last week. Looking forward to the next n.w.c national meet Unti...
08/07/2024

A few favorites from the Gilmore "Red Barns Spectacular" last week. Looking forward to the next n.w.c national meet
Until then back to work

Looking forward to my visit at the Gilmore.Excited to announce that I'll will be participating one of the "car talks" th...
07/31/2024

Looking forward to my visit at the Gilmore.

Excited to announce that I'll will be participating one of the "car talks" that occurs during the Kalamazoo Antique Auto Restorers Club's 'Red Barns Spectacular'.

My presentation, 'Woody Restorations,' is scheduled to be held in the theater at 1 p.m. Saturday August 3, 2024.

Address

Phoenixville, PA

Alerts

Be the first to know and let us send you an email when East Coast Woodies posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to East Coast Woodies:

Share