Konokazi_Kustoms

08/13/2026

Smarter not harder ha

08/13/2026

Made a guide out of 1/4inch plate the hike in the plate is concentric with the old broke bolt in the body mount. Used an annular cutter to cut around the weld ed nut inside the channel weld a bing and plate and bam fixed the body mount hole

08/13/2026

08/13/2026

Million dollar transgender cross dressing cross member . Dei approved made by some Asian as***le

08/13/2026

Slotted for convenience ha

08/13/2026

Layout and dykem

08/09/2026

Brad masterson chopped 50 Chevy moor door for sale bagged runs and drives title in hand

08/08/2026

I always check full articulation and nothing rubs yay!

08/08/2026

Had to redo another shops work again . New four link from speed way located off the factory perches on the frame made my life easier ha made custom bag mounts got slam specialty bags they have 11 inches of travel so I would have at least 3 inches of drop out and 5 inches of compression which will lay the running boards about 1.5 inches off the ground . Customer didn’t want a high bed floor it’s only 1 inch higher than stock . The shocks are the limit straps for the bags at 10.5 inches at full droop bag is rated to 11 inches . The shocks also doesn’t bottoms out before the bump stops so that’s always good haha

08/08/2026

Overbuilt transmission crossmember ha