FL419 Wardigger Mods

04/30/2026

This is what some folks do for fun!!

03/16/2026

03/09/2026

I love these!

01/30/2026

With EZSNB – I just got recognized as one of their top fans! 🎉

01/10/2026

I love this woman!

01/09/2026

I spent three days clearing out (11) 30' trees, and (4) 60'-80' trees with stumps. We finished just as the snow started! That must make it a "Wrap" for the wood harvest! My wife said 200 logs is "ENOUGH" 😂🤣!! 21' long is what the Sawmill can handle, so that is what I cut the big ones to.

12/11/2025

I had to “monkey up” this tree, about 30 feet so I could pull this 75 ft tall Ponderosa pine over. I used the Mog to dig all around the base so we could remove the entire stump by using the tree as a Lever!

08/30/2024

8 ton Jack from Amazon, like $85, add a piece of 2" X 4" Tube, or (2) 2" sq, like I did, because I had it. I made mine 18" because I have a 20,000 Lb capacity Hydraulic winch in the front of mine, and this allows me to still remove the Loader assembly.

08/27/2024

After adding the Hydraulic Multiplier Kit, 4 Circuit Selector Valve, Couplers and Switch Box Control, I was able to make my hydraulic winch turn both ways. I simply select "Winch" and lift the Bucket tipper lever to un-spool, down for spool. Next I'm adding grapples to my rock bucket, then the Auger gets installed!

08/10/2024

Does anyone need something hauled from Las Cruces to Phx?

08/04/2024

After struggling with the dang cap for over an hour, I came up with this idea. This is the leverage you have. I was able to lean over the aluminum bar to put enough pressure down, and still had both hands to turn the cap to lock it in place. Done, 3 minutes flat!